Performance of Ni-Based Catalysts with La Promoter for the Reforming of Methane in Gasification Process

Meng Chen,Lei Wang

DOI: https://doi.org/10.3390/catal14060355

IF: 3.9

2024-05-31

Catalysts

Abstract:The deactivation of active sites caused by high-temperature sintering and the deposition of a large amount of carbon are the main difficulties in the reforming of methane using Ni-based catalysts. La, as a promoter, has an ameliorating effect on the defects of Ni-based catalysts. In this article, the mechanism of action of Ni-based catalysts with the introduction of the rare-earth metal additive La was reviewed, and the effects of La on the methane-reforming performance of Ni-based catalysts were examined. The physical properties, alkalinity, and activity of Ni-based catalysts can be enhanced by the use of the auxiliary agent La, which promotes the conversion of CH4 and CO2 as well as the selectivity towards H2 and CO formation in the reforming of methane. The reason why the Ni-based catalysts could maintain long-term stability in the presence of La was discussed. Furthermore, the current state of research on the introduction of different amounts of La in the reforming of methane at home and abroad was analyzed. It was found that 2–5 wt.% La is the most optimal quantity for improving the catalyst activity and stability, as well as the CO2 chemisorption. The limitations and directions for future research in the reforming of methane were discussed.

chemistry, physical

What problem does this paper attempt to address?

The paper mainly discusses the influence of adding lanthanum (La) as a promoter on the performance of nickel (Ni) catalysts during methane gasification. The study points out that nickel-based catalysts are prone to deactivation of active sites and carbon deposition at high temperatures, which limits their application in methane reforming reactions. Lanthanum, as a promoter, can improve the defects of nickel-based catalysts, enhance their physical properties, alkalinity, and catalytic activity, promote the conversion of methane and carbon dioxide, and increase the selective production of hydrogen and carbon monoxide, thereby increasing long-term stability. The paper also analyzes the effect of different lanthanum contents on methane reforming. It is found that the optimal addition amount is 2-5wt.% of lanthanum, which can improve the activity and stability of the catalyst, as well as enhance the chemical adsorption of carbon dioxide. Lanthanum can improve the anti-coking and regenerative performance of the catalyst by adjusting the surface acidity and basicity of the catalyst, promoting the adsorption and reaction of hydrocarbons, and reducing carbon deposition. In addition, lanthanum can enhance the reducibility of nickel-based catalysts, prevent particle aggregation by forming an oxygen ion layer, reduce carbon formation, improve the mobility of surface oxygen, accelerate carbon oxidation reactions, and thereby improve the catalyst's lifespan and efficiency. In summary, the paper aims to address how to optimize nickel-based catalysts through lanthanum promoters to improve the catalytic activity and stability in methane reforming processes, reduce carbon deposition, increase hydrogen production, and provide directions for future research.

Performance of Ni-Based Catalysts with La Promoter for the Reforming of Methane in Gasification Process

Investigation of La Promotion Mechanism on Ni/SBA-15 Catalysts in CH4 Reforming with CO2

Effects of Promoters and Preparation Procedures on Reforming of Methane with Carbon Dioxide over Ni/Al2O3 Catalyst

Insight into exhaust gas-methane reforming over La 2 O 3 -modified Ni/Ca-Al for enhanced hydrogen-rich production

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: II . Effect of basic promoters

Studies on nickel-based catalysts for carbon dioxide reforming of methane

Enhancement of CO2 Methanation over La-Modified Ni/SBA-15 Catalysts Prepared by Different Doping Methods

A Novel Promoting Effect of Chelating Ligand on the Dispersion of Ni Species over Ni/SBA-15 Catalyst for Dry Reforming of Methane

High Performance of Mg–La Mixed Oxides Supported Ni Catalysts for Dry Reforming of Methane: the Effect of Crystal Structure

A highly active Ni catalyst supported on Mg-substituted LaAlO3 for carbon dioxide reforming of methane

Promoted Nickel–Cobalt Bimetallic Catalysts for Biogas Reforming

The Ni Catalyst Supported on the FSP-made Transition Metal (Co, Mn, Cu or Zn) Doped La2O3 Material for the Dry Reforming of Methane

Ni/Al2O3-La2O3 catalysts synthesized by a one-step polymerization method applied to the dry reforming of methane: effect of precursor structures of nickel, perovskite and spinel

Lanthanum-mediated enhancement of nickel nanoparticles for efficient CO 2 methanation

The influence of alkaline promoters on the properties of the Ni/HAp catalyst in the methane dry reforming reaction

Ordered mesoporous Ni-La2O3/Al2O3 catalysts towards efficient plasma-assisted dry reforming of methane

Highly Dispersed Ni-La Catalysts over Mesoporous Nanosponge MFI Zeolite for Low-Temperature CO2 Methanation: Synergistic Effect Between Mesoporous and Microporous Channels

Enhanced low-temperature CO2 methanation over La-promoted NiMgAl LDH derived catalyst: Fine-tuning La loading for an optimal performance

Specific Features Concerning the Mechanism of Methane Reforming by Carbon Dioxide over Ni/La2O3Catalyst

Efficient Hydrogen Production by Combined Reforming of Methane over Perovskite-Derived Promoted Ni Catalysts

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La2O3/SiO2 Catalysts in a Fluidized-Bed Reactor