Maximal First Betti Number Rigidity for Open Manifolds of Nonnegative Ricci Curvature

Zhu Ye

DOI: https://doi.org/10.1007/s12220-024-01551-7

2024-02-16

Journal of Geometric Analysis

Abstract:Let M be an open Riemannian n -manifold with nonnegative Ricci curvature. We prove that if the first Betti number of M equals , then M is flat.

mathematics

What problem does this paper attempt to address?

Nonnegative Ricci curvature, splitting at infinity, and first Betti number rigidity

Jiayin Pan,Zhu Ye

2024-04-16

Abstract:We study the rigidity problems for open (complete and noncompact) $n$-manifolds with nonnegative Ricci curvature. We prove that if an asymptotic cone of $M$ properly contains a Euclidean $\mathbb{R}^{k-1}$, then the first Betti number of $M$ is at most $n-k$; moreover, if equality holds, then $M$ is flat. Next, we study the geometry of the orbit $\Gamma\tilde{p}$, where $\Gamma=\pi_1(M,p)$ acts on the universal cover $(\widetilde{M},\tilde{p})$. Under a similar asymptotic condition, we prove a geometric rigidity in terms of the growth order of $\Gamma\tilde{p}$. We also give the first example of a manifold $M$ of $\mathrm{Ric}>0$ and $\pi_1(M)=\mathbb{Z}$ but with a varying orbit growth order.

Differential Geometry
On the First Eigenvalue of Finsler Manifolds with Nonnegative Weighted Ricci Curvature

SongTing Yin,Qun He,YiBing Shen

DOI: https://doi.org/10.1007/s11425-013-4707-9

2013-01-01

Science China Mathematics

Abstract:We prove that for a compact Finsler manifold M with nonnegative weighted Ricci curvature,if its first closed(resp.Neumann)eigenvalue of Finsler-Laplacian attains the sharp lower bound,then M is isometric to a circle(resp.a segment).Moreover,a lower bound of the first eigenvalue of Finsler-Laplacian with Dirichlet boundary condition is also estimated.These generalize the corresponding results in recent literature.
Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

Hongwei Xu,Li Lei,Juanru Gu

DOI: https://doi.org/10.1007/s11401-020-0199-4

2020-01-01

Abstract:Let Mn(n ≥ 4) be an oriented compact submanifold with parallel mean curvature in an (n + p)-dimensional complete simply connected Riemannian manifold Nn+p. Then there exists a constant δ(n, p) 2 (0, 1) such that if the sectional curvature of N satisfies $${\overline K _N} \in \;\,\left[ {\delta \left( {n,p} \right),\;1} \right]$$, and if M has a lower bound for Ricci curvature and an upper bound for scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally umbilic sphere $${S^n}({1 \over {\sqrt {1 + {H^2}} }})$$, a Clifford hypersurface $${S^m}({1 \over {\sqrt {2(1 + {H^2})} }})\; \times \;{S^m}({1 \over {\sqrt {2(1 + {H^2})} }})$$ in the totally umbilic sphere $${S^{n+1}}({1 \over {\sqrt {1 + {H^2}} }})$$ with n = 2m, or $${\mathbb{C}{\rm{P}}^2}\left( {{4 \over 3}\left( {1 + {H^2}} \right)} \right)$$ in $${S^7}({1 \over {\sqrt {1 + {H^2}} }})$$. This is a generalization of Ejiri’s rigidity theorem.
On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Hong-Wei Xu,Li Lei,Juan-Ru Gu

DOI: https://doi.org/10.4310/pamq.2016.v12.n2.a6

2016-01-01

Pure and Applied Mathematics Quarterly

Abstract:In this paper, we investigate Yau's rigidity problem for compact submanifolds with parallel mean curvature in pinched Riemannian manifolds. Firstly, we prove that if M-n is an oriented closed minimal submanifold in an (n + p)-dimensional complete simply connected Riemannian manifold Nn(+p), then there exists a constant delta(0)(n, p) is an element of (0, 1) such that if the sectional curvature of N satisfies (K) over bar (N) is an element of[delta(0)(n, p), 1], and if M has a lower bound for the sectional curvature and an upper bound for the normalized scalar curvature, then N is isometric to Sn+p. Moreover, M is either a totally geodesic sphere, one of the Clifford minimal hypersurfaces S-k(root k/n) x S-n (k)(root n-k/n) in Sn+1 for k = 1,..., n-1, or the Veronese submanifold in Sn+d, where d = 1/2n(n + 1) - 1. We then generalize the above theorem to the case where M ia a compact submanifold with parallel mean curvature in a pinched Riemannian manifold.
Some Results On Fundamental Groups And Betti Numbers Of Finsler Manifolds

Yibing Shen,Wei Zhao

DOI: https://doi.org/10.1142/S0129167X12500632

2012-01-01

International Journal of Mathematics

Abstract:In this paper the relationship between the Ricci curvature and the fundamental groups of Finsler manifolds are studied. We give an estimate of the first Betti number of a compact Finsler manifold. Two finiteness theorems for fundamental groups of compact Finsler manifolds are proved. Moreover, the growth of fundamental groups of Finsler manifolds with almost-nonnegative Ricci curvature are considered.
On manifolds with nonnegative Ricci curvature and the infimum of volume growth order $<2$

Zhu Ye

2024-05-02

Abstract:We prove two rigidity theorems for open (complete and noncompact) $n$-manifolds $M$ with nonnegative Ricci curvature and the infimum of volume growth order $<2$. The first theorem asserts that the Riemannian universal cover of $M$ has Euclidean volume growth if and only if $M$ is flat with an $n-1$ dimensional soul. The second theorem asserts that there exists a nonconstant linear growth harmonic function on $M$ if and only if $M$ is isometric to the metric product $\mathbb{R}\times N$ for some compact manifold $N$.

Differential Geometry
Quantitative Maximal Diameter Rigidity of Positive Ricci Curvature

Tianyin Ren,Xiaochun Rong

DOI: https://doi.org/10.1515/crelle-2024-0015

2024-07-18

Abstract:In Riemannian geometry, the Cheng's maximal diameter rigidity theorem says that if a complete $n$-manifold $M$ of Ricci curvature, $\operatorname{Ric}_M\ge (n-1)$, has the maximal diameter $\pi$, then $M$ is isometric to the unit sphere $S^n_1$. The main result in this paper is a quantitative maximal diameter rigidity: if $M$ satisfies that $\operatorname{Ric}_M\ge n-1$, $\operatorname{diam}(M)\approx \pi$, and the Riemannian universal cover of every metric ball in $M$ of a definite radius satisfies a Riefenberg condition, then $M$ is diffeomorphic and bi-Hölder close to $S^n_1$.

Differential Geometry
On Nonpositively Curved Compact Riemannian Manifolds with Degenerate Ricci Tensor

Dincer Guler,Fangyang Zheng

DOI: https://doi.org/10.1090/s0002-9947-2010-05316-4

IF: 1.3529

2010-01-01

Transactions of the American Mathematical Society

Abstract:In this article, we prove that if the Ricci tensor of a compact nonpositively curved manifold M n is nowhere negative definite, then it admits local flat factors. To be more precise, let U C M be the open subset where the Ricci tensor has maximum rank r. Then for any connected component U a of U, its universal cover U a is isometric to R n―r ×N r a , where n r a is a nonpositively curved manifold with negative Ricci curvature. In particular, if M n is compact, nonpositively curved without Euclidean de Rham factor, and both the manifold and the metric are real analytic, then its Ricci tensor must be negative definite somewhere.
Ricci flow on open 3-manifolds and positive scalar curvature

Laurent Bessières,Gérard Besson,Sylvain Maillot

DOI: https://doi.org/10.2140/gt.2011.15.927

2010-01-10

Abstract:We show that an orientable 3-dimensional manifold M admits a complete riemannian metric of bounded geometry and uniformly pos- itive scalar curvature if and only if there exists a finite collection F of spherical space-forms such that M is a (possibly infinite) connected sum where each summand is diffeomorphic to S2xS1 or to some mem- ber of F. This result generalises G. Perelman's classification theorem for compact 3-manifolds of positive scalar curvature. The main tool is a variant of Perelman's surgery construction for Ricci flow.

Differential Geometry
A Rigidity Theorem for Hypersurfaces with Positive Möbius Ricci Curvature in $S^{n+1}$

Zejun Hu,Haizhong Li

DOI: https://doi.org/10.21099/tkbjm/1496164892

2005-01-01

Tsukuba Journal of Mathematics

Abstract:Let M-n (n (3) 3) be an immersed hypersurface without umbilic points in the (n + 1)-dimensional unit sphere Sn+1. Then M-n is associated with a so-called Mobius form Phi and a Mobius metric g which are invariants of M-n under the Mobius transformation group of Sn+1. In this paper, we show that if Phi is identically zero and the Ricci curvature Ric(g) is pinched: (n - 1)(n - 2)/n(2) <= Ric(g) = (n(2) - 2n + 5)(n - 2)/[n(2)(n -1)], then it must be the case that n = 2p and M-n is Mobius equivalent to S-p(1/O2) x S-p(1/o2).
Rigidity of Closed Submanifolds in a Locally Symmetric Riemannian Manifold

Juan-ru Gu,Yan Leng,Hong-wei Xu

DOI: https://doi.org/10.1007/s11766-016-3227-0

2016-01-01

Abstract:Let M n ( n ≥ 4) be an oriented closed submanifold with parallel mean curvature in an ( n + p )-dimensional locally symmetric Riemannian manifold N n+p . We prove that if the sectional curvature of N is positively pinched in [ δ , 1], and the Ricci curvature of M satisfies a pinching condition, then M is either a totally umbilical submanifold, or δ = 1, and N is of constant curvature. This result generalizes the geometric rigidity theorem due to Xu and Gu [15].
Optimal volume bound and volume growth for Ricci-nonnegative manifolds with positive Bi-Ricci curvature

Jie Zhou,Jintian Zhu

2024-07-01

Abstract:In this paper, we prove the optimal volume growth for complete Riemannian manifolds $(M^n,g)$ with nonnegative Ricci curvature everywhere and bi-Ricci curvature bounded from below by $n-2$ outside a compact set when the dimension is less than eight. This answers a question [AX24, Question 1] proposed by Antonelli-Xu in dimensions six and seven. As a by-product, we also prove an analogy of Gromov's volume bound conjecture [Gro86, Open Question 2.A.(b)] under the condition of positive bi-Ricci curvature.

Differential Geometry
ON COMPLETE THREE-DIMENSIONAL MANIFOLDS WITH NONNEGATIVE RICCI CURVATURE

Mingguang Li

2009-01-01

Journal of Mathematics

Abstract:The paper studies the geometric and topological properties of a complete noncompact Riemannian three-dimensional manifold with nonegative Ricct curvature. By comparing the volume growth order of the manifold itself to that of its universal covering space, the paper proves that every three-dimensional with nonnegative Ricci curvature and (1+δ)-order volume growth in strict sense must be contractible provided that its universal covering is finite.
Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

Fengbo Hang,Xiaodong Wang

DOI: https://doi.org/10.48550/arXiv.0911.0380

2009-11-02

Differential Geometry

Abstract:We prove some boundary rigidity results for the hemisphere under a lower bound for Ricci curvature. The main result can be viewed as the Ricci version of a conjecture of Min-Oo.
The Manifolds with Nonnegetive Ricci Curvature and Strong Bounded Geometry Condition

Mingguang Li

2008-01-01

Chinese Annals of Mathematics

Abstract:Let M be a complete noncompact Riemannian manifold with nonnegative Ricci curvature.If M is with sub-large volume growth vol[B(p,r)]≥β_M~r~(n-1),■p∈M,■r≥1 and strong bounded geometry condition,then M is of finite topological type.
Rigidity of Einstein Manifolds with Positive Scalar Curvature

Hong-wei Xu,Juan-ru Gu

DOI: https://doi.org/10.1007/s00208-013-0957-7

2013-01-01

Mathematische Annalen

Abstract:We prove that if $M^n(n\ge 4)$ is a compact Einstein manifold whose normalized scalar curvature and sectional curvature satisfy pinching condition $R_0>\sigma _{n}K_{\max }$, where $\sigma _n\in (\frac{1}{4},1)$ is an explicit positive constant depending only on $n$, then $M$ must be isometric to a spherical space form. Moreover, we prove that if an $n(\ge {\!\!4})$-dimensional compact Einstein manifold satisfies $K_{\min }\ge \eta _n R_0,$ where $\eta _n\in (\frac{1}{4},1)$ is an explicit positive constant, then $M$ is locally symmetric. It should be emphasized that the pinching constant $\eta _n$ is optimal when $n$ is even. We then obtain some rigidity theorems for Einstein manifolds under $(n-2)$-th Ricci curvature and normalized scalar curvature pinching conditions. Finally we extend the theorems above to Einstein submanifolds in a Riemannian manifold, and prove that if $M$ is an $n(\ge {\!\!4})$-dimensional compact Einstein submanifold in the simply connected space form $F^{N}(c)$ with constant curvature $c\ge 0$, and the normalized scalar curvature $R_0$ of $M$ satisfies $R_0>\frac{A_n}{A_n+4n-8}(c+H^2),$ where $A_n=n^3-5n^2+8n$, and $H$ is the mean curvature of $M$, then $M$ is isometric to a standard $n$-sphere.
Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary

Haizhong Li,Yong Wei

DOI: https://doi.org/10.1093/imrn/rnu052

2014-01-01

International Mathematics Research Notices

Abstract:Let (N, g) be an n-dimensional complete Riemannian manifold with nonempty boundary partial derivative N. Assume that the Ricci curvature of (N, g) has a negative lower bound Ric >= -(n-1)c(2) for some c> 0, and the mean curvature of the boundary partial derivative N satisfies H = -(n-1) c(0) > (n-1)c for some c(0) > c > 0. Then a known result (cf. [12]) says that sup(x is an element of N) d(x, partial derivative N) <= 1/c coth(-1) c(0)/c. In this paper, we prove the rigidity result that if N is compact, then the equality holds if and only if (N, g) is isometric to the geodesic ball of radius 1/c coth(-1) c(0)/c in an n-dimensional hyperbolic space H-n(-c(2)) of constant sectional curvature -c(2). Moreover, we prove an analogous result for manifold with m-Bakry- Emery Ricci curvature bounded below by a negative constant.
On locally conformally flat manifolds with positive pinched Ricci curvature

Liang Cheng

2023-05-29

Abstract:By using the Yamabe flow, we prove that if $(M^n,g)$, $n\geq3$, is an $n$-dimensional locally conformally flat complete Riemannian manifold $Rc\geq \epsilon Rg>0$, where $\epsilon>0$ is a uniformly constant, then $M^n$ must be compact. Our result shows that Hamilton's pinching conjecture also holds for higher dimensional case if we assume additionally the metric is locally conformally flat.

Differential Geometry
On Ricci Rank Of Cartan-Hadamard Manifolds

dincer guler,fangyang zheng

DOI: https://doi.org/10.1142/S0129167X02001459

2002-01-01

International Journal of Mathematics

Abstract:In this article, we prove that the maximum rank r of the Ricci tensor of a Cartan-Hadamard manifold M-n satisfies the inequality 2r - 1 greater than or equal to n - s, where n is the dimension and s is the core number, which measures the flatness of M-n. Examples show that this lower bound is sharp.
Rigidity theorems for compact Bach-flat manifolds with positive constant scalar curvature

Haiping Fu,Jianke Peng

DOI: https://doi.org/10.48550/arXiv.1707.07236

2017-07-23

Abstract:In this paper, we prove some rigidity theorems for compact Bach-flat $n$-manifold with the positive constant scalar curvature. In particular, our conditions in Theorem 1.4 have the additional properties of being sharp.

Differential Geometry

Maximal First Betti Number Rigidity for Open Manifolds of Nonnegative Ricci Curvature

Nonnegative Ricci curvature, splitting at infinity, and first Betti number rigidity

On the First Eigenvalue of Finsler Manifolds with Nonnegative Weighted Ricci Curvature

Generalized Ejiri’s Rigidity Theorem for Submanifolds in Pinched Manifolds

On Yau Rigidity Theorem for Submanifolds in Pinched Manifolds

Some Results On Fundamental Groups And Betti Numbers Of Finsler Manifolds

On manifolds with nonnegative Ricci curvature and the infimum of volume growth order $<2$

Quantitative Maximal Diameter Rigidity of Positive Ricci Curvature

On Nonpositively Curved Compact Riemannian Manifolds with Degenerate Ricci Tensor

Ricci flow on open 3-manifolds and positive scalar curvature

A Rigidity Theorem for Hypersurfaces with Positive Möbius Ricci Curvature in $S^{n+1}$

Rigidity of Closed Submanifolds in a Locally Symmetric Riemannian Manifold

Optimal volume bound and volume growth for Ricci-nonnegative manifolds with positive Bi-Ricci curvature

ON COMPLETE THREE-DIMENSIONAL MANIFOLDS WITH NONNEGATIVE RICCI CURVATURE

Rigidity Theorems for Compact Manifolds with Boundary and Positive Ricci Curvature

The Manifolds with Nonnegetive Ricci Curvature and Strong Bounded Geometry Condition

Rigidity of Einstein Manifolds with Positive Scalar Curvature

Rigidity Theorems for Diameter Estimates of Compact Manifold with Boundary

On locally conformally flat manifolds with positive pinched Ricci curvature

On Ricci Rank Of Cartan-Hadamard Manifolds

Rigidity theorems for compact Bach-flat manifolds with positive constant scalar curvature