Abstract:This study focuses on the development of protective coatings for carbon-carbon composite materials (CCСM) used in high-temperature processes in aerospace engineering. CСCM have limitations due to their susceptibility to oxidation, erosion, and burnout in gas streams. Our research is aimed at creating protective coatings using functionally active charges (FAC) obtained under non-stationary temperature conditions and improving the performance of composites. The aim of our study is to identify the optimal compositions of powders for chromium-alloyed protective coatings using functionally active charges to increase the heat resistance of the working surface. We analyzed various methods of obtaining protective coatings, including chemical-thermal and liquid-phase saturation methods, to find out their peculiarities in interaction with the CCСM matrix and changes in their mechanical properties. In addition to the traditional methods, we have investigated the method of saturating the surface with a solid phase in an active gas environment using FAС, which are obtained under non-stationary temperature conditions. This method provides high quality coatings, reduces processing time and makes it possible to work at high temperatures depending on the composition of the spray coatings. Much attention was paid to the problem associated with chemical interaction and formation of carbide phases, which are important for ensuring the stability of coatings under high temperature conditions. Experimental studies include a factorial experiment to determine the compositions of powder mixtures that provide high heat resistance. Various independent variables, such as the content of chromium, silicon, titanium, and aluminum, were considered, taking into account their influence on the physical and mechanical properties of coatings. Particular attention was paid to the optimization of the parameters of thermal autoinitiation of the functionally active charge under process conditions. Regression equations are presented to evaluate the dependence of the wear resistance of coatings on the autoinitiation parameters and the content of alloying elements. The analysis of the study results includes the construction of three-dimensional graphical dependencies for optimizing the composition of powdered CBA in the Cr-Al-Ti and Cr-Al-Si systems. In practice, chromium-aluminum-siliconized coatings obtained under isothermal conditions, when tested for heat resistance, have a more porous surface through which oxygen penetrates to the surface of the HCCM. Compared to the coatings obtained using FAS, the heat resistance is 1.5-1.7 times higher, which can be explained by the higher concentration of chromium, aluminum, silicon, and titanium, which contribute to the formation of protective oxide membraness. The low-porosity surface of the coatings obtained using functionally active layers prevents oxygen from entering the material, contributing to the formation of oxide protective membranes such as SiO2, TiO2, Cr2O3, Al2O3.

Specific heat capacity of chromium aluminum based nitride and oxynitride hard coatings

Thermal and Thermo-Mechanical Properties of Ti–Al–N and Cr–Al–N Coatings

Effects of Heat Treatment on Structure Transformation of Cr/Al Composite Coatings

Sputter deposited chromium nitride based ternary compounds for hard coatings

Effects of chromium,titanium and aluminum on the friction and wear properties of nitride hard coatings

High Temperature Hardness and Thermal Analysis of CoNiCrAlY Alloys Used As Bond Coats for Thermal Barrier Coatings

Characterization of microstructure and hardness of PCVD deposited hard coatings

Machining Performance of Sputter-Deposited (al0.34cr0.22nb0.11si0.11ti0.22)50n50 High-Entropy Nitride Coatings

Machining Performance of Sputter-Deposited ( Al 0

Einfluss von Sc, Y, Ti, Zr, Hf, V, Nb und Ta auf strukturelle und mechanische Eigenschaften von Cr-Al-N-Schichten

Influence of Interlayer Materials on the Mechanical Properties and Thermal Stability of a CrAlN Coating on a Tungsten Carbide Substrate

Hardening mechanism and plastic deformation behavior in super-hard AlCrNbSiTiN high-entropy nitride nanocomposite coatings

Effect of the Post-Deposition Thermal Treatment on the Mechanical Properties of a Compositionally Modulated CrAlSiN-AlSiN Coating

Phase Composition, Hardness, and Thermal Shock Properties of AlCrTiN Hard Films with High Aluminum Content

High Temperature Oxidation and Tribological Behavior of Cr3C2-25CoNiCrAlY and Cr3C2-25NiCr Coatings Prepared by AC-HVAF

Mechanical and Tribological Properties of Multi-Element (alcrtatizr)n Coatings

Mechanical, Tribological, and Corrosion Resistance Properties of (TiAlxCrNbY)Ny High-Entropy Coatings Synthesized Through Hybrid Reactive Magnetron Sputtering

Microstructural origins of high hardness and toughness in cathodic arc evaporated Cr-Al-N coatings

Microstructure, mechanical properties, and oxidation behavior of arc-evaporated Cr–Al–O–N coatings with various Cr/Al ratios

High temperature properties of nichrome resistant heaters – A systematic comparison of APS, suspension and filament HVOF sprayed coatings

RESEARCH OF HEAT RESISTANCE OF CARBON-CARBON COMPOSITE MATERIALS WITH PROTECTIVE COATINGS OBTAINED USING FUNCTIONALLY ACTIVE CHARGES