Abstract:Hot rolling of steels represents one of the most critical steps to achieve finished products with high surface quality. The increasing productivity added to the rising customer requirements result in more and more severe scheduling rules for the HSM. Strip surface aspect is very important in terms of HSM operation costs and productivity limitation. Among all surface defects, the most crippling comes from the oxide scale formed at the surface of the steel during the hot rolling, at the entry of the finishing mill (last part of the hot strip mill): the secondary scale, mechanical behaviour of which is still poorly known. The secondary scale may fracture under the stresses imposed by the successive rolling passes, and can be embedded in the steel strip surface: this defect is called "rolled-in scale defect". In addition, the extrusion of the subjacent metal inside the oxide cracks induces large local modifications of friction and heat transfer conditions. Consequently, a precise description of oxide scale deformation mechanisms is necessary to better define the boundary conditions in a roll bite and to better understand the initiation mechanisms of rolled-in scale defects. Our scientific objective is then to provide a realistic physical and numerical model to simulate the oxide scale flow in the roll bite and in particular, its damage. After the presentation of the industrial process and the context of this study, the physical and mechanical properties of the oxide scale in the finishing mill are investigated. We introduce the Forge2® finite element software, selected for this study to simulate the oxide scale behaviour in a finishing mill stand. The numerical developments performed to simulate the different kinds of oxide damage are described. Three mechanical tests have been selected to approach the solicitations undergone by the oxide scale at the entry of the roll gap, suspected to be critical for damage: the 4-point hot bending test, the hot tension test and the hot plane strain compression test. A numerical study is performed in parallel. Based on constitutive data obtained from these three mechanical tests, the mechanical description of a rolling stand is sufficient for satisfactory simulation of the industrial process.

Production of sponge iron powder by reduction of rolling mill scale

Preparation of Direct Reduction Sponge Iron (DRI) Using Pyrite Cinder Containing Nonferrous Metals

Isothermal Reduction of Oxide Scale on Hot-Rolled, Low-Carbon Steel in 10 Pct H 2 -Ar

Investigation into Recycling of Iron Oxide Scale on H13 Steel by Low‐Temperature Carbothermal Reduction Method

Direct Reduction of Fe, Ni and Cr from Oxides of Waste Products Used in Briquettes for Slag Foaming in EAF

Influence of Reduction Temperatures on Reduction of FeO-Containing Slag by Agricultural Waste

A Laboratory Study of the Reduction of Iron Oxides by Hydrogen

An integrated experimental and numerical study of iron-coke briquettes' pyrolysis and reduction behaviour in an industrial-scale pyrolyser

Manufacturing and Properties of Spherical Iron Particles from a By-Product of the Steel Industry

Comparative Analysis of Chemical and Phase Compositions of Rolling Scale of Metallurgical Enterprises

A Scale-up Approach to Produce Highly Reactive Iron Ore Catalyzed Coke for Blast Furnace Operation

Reduction of Oxide Scale with Hydrogen

Mill Scale of Hot-Rolled Rebars

Experimental study and numerical simulation of iron oxide scales mechanical behavior in hot rolling

Sustainable steel through hydrogen plasma reduction of iron ore: process, kinetics, microstructure, chemistry

Decomposition, Reduction and Dissolution Mechanism of Calcium Sulfate in Iron Oxide Dust Pellet

Innovative Transformation and Valorisation of Red Mill Scale Waste into Ferroalloys: Carbothermic Reduction in the Presence of Alumina

Potential Utilization of Iron Oxidation Reaction Heat for the Generation of SiO2–FeO System Melts

Isothermal Reduction Behavior of Oxide Scale on the Surface of Hot‐Rolled Strip Steel Under Different Hydrogen Concentrations

The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

Mineralogical Aspects of Reducing Lump Iron Ore, Pellets, and Sinter with Hydrogen