Abstract:Using biomass for partial replacement of coke breeze in iron-ore sintering process is an effective technique as a countermeasure against global warming. However, the sinter strength would be weakened due to the damaged heat pattern at high biomass proportion. In this paper, the gaseous fuel injection method was experimentally investigated with the aim at solving this problem. Eleven cases were arranged to examine the ultra-low concentration of methane combustion and its effect on the improvement of heat pattern at high charcoal proportion. The temperature in the sintering bed was recorded by both thermocouples and infrared thermography. The thermocouple data indicated that the melt quantity index was significantly increased by employing the gaseous fuel injection method. Moreover, the infrared images show that the red-hot region was expanded at each moment in the methane injection cases. The influencing mechanism of gaseous fuel injection on the heat pattern in sintering process was revealed in this paper. As the premixed methane/air approaching to the solid fuel combustion zone, it was preheated by the hot sintered ores, then ignited and self-sustained near the solid fuel combustion zone. A newly generated gaseous fuel combustion zone coupled with the solid fuel combustion zone was used to control the heat pattern in sintering bed. The results showed that the heat pattern and sinter strength kept increasing until the methane concentration increased to 0.4–0.5% under the lab conditions. The stable interval of secondary combustion zone in the sintering bed was also analyzed. Finally, comprehensively considering the sinter strength, yield, productivity and sintering time, the recommended equivalent methane concentration at high charcoal proportion was 0.5% where the shatter strength grew 3.78% and solid fuel rate reduced 7.52%, compared with 100% coke sintering case. Generally, the gaseous fuel injection offers a technical support for the iron ore sinter production using cheap or carbon neutral solid fuel. More importantly, this method can also reduce solid fuels (the main contributor of contamination dust during the production, transportation and storage) consumption by partial substitution of cleaner gaseous fuel.

An integrated experimental and numerical study of iron-coke briquettes' pyrolysis and reduction behaviour in an industrial-scale pyrolyser

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Experimental Study on Impact of Iron Coke Hot Briquette As an Alternative Fuel on Isothermal Reduction of Pellets under Simulated Blast Furnace Conditions

Experimental Study of Commercial Charcoal As Alternative Fuel for Coke Breeze in Iron Ore Sintering Process

Numerical investigation of the impact of injecting coke oven gas on raceway evolution in an ironmaking blast furnace

A Scale-up Approach to Produce Highly Reactive Iron Ore Catalyzed Coke for Blast Furnace Operation

Modified biomass fuel instead of coke for iron ore sintering

Study of Smelting Reduction Iron Coupled with Pulverized Coal Gasification to Produce High-Concentration Syngas

Substitution of coke with pelletized biocarbon in the European and Chinese steel industries: An LCA analysis

Woody biomass waste derivatives in decarbonised blast furnace ironmaking process

Computational Fluid Dynamics Study of the Flow and Thermochemical Behaviors of a Carbon Composite Briquette in an Ironmaking Blast Furnace

Mathematical modeling and characteristics evaluation of coke replacing with commercial biochar in iron ore sintering process

Investigation on the Combustion Behaviors of Coke and Biomass Char in Quasi-Granule with CuO–CeO2 Catalysts in Iron Ore Sintering

Gasification of iron coke and cogasification behavior of iron coke and coke under simulated hydrogen-rich blast furnace condition

Insights into direct reduction iron using bamboo biomass as a green and renewable reducer: Reduction behavior study and kinetics analysis

Study on Replacement of Coke With Charcoal and Methane in Iron-Ore Sintering

Direct Reduction of Fe, Ni and Cr from Oxides of Waste Products Used in Briquettes for Slag Foaming in EAF

Improvement of Heat Pattern and Sinter Strength at High Charcoal Proportion by Applying Ultra-Lean Gaseous Fuel Injection in Iron Ore Sintering Process

Effect of Replacing Coke with Biomass Fuel on Sinter Properties and Pollutant Emissions

Particle-scale study of coke combustion in the raceway of an ironmaking blast furnace

A Computational Study on the Reduction Behavior of Iron Ore/Carbon Composite Pellets in Both Single and Multi-layer Bed Rotary Hearth Furnace