Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

New Insights on Consolidation Behavior of Fe2O3 in the Fe3O4-CaO-MgO-SiO2 System for Fluxed Pellet Production: Phase Transformations and Morphology Evolution

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Interfacial Phenomenon and Marangoni Convection of Fe–C Melt on Coke Substrate under in Situ Observation

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Interfacial reaction behavior in blast furnace and analysis of influence mechanism

Investigations of the effect of unburnt pulverized coal on the deposit formation mechanism in a rotary kiln for fluxed pellet production

New understanding on formation mechanism of CaFe2O4 in Fe2O3 -Fe3O4-CaO-SiO2 system during sintering Process: Phase transformation and morphologies evolution

Gaseous fluorides formation mechanism in the roasting process of the fluorite-bearing iron concentrate

Oxyfuel Combustion Conference Mechanisms for Calcination and Sulfation of Limestone during Oxy-Fuel Combustion

Decomposition Behavior of Limestone Powder in Converter Flue Gas: Effect of Fe‐Oxide Dust on Calcium Ferrite Formation

Updating mechanism of siderite roasting through insights into reactions between inherent oxides of iron and carbon

Combustion behavior of co-injecting flux, pulverized coal, and natural gas in blast furnace and its influence on blast furnace smelting

Effect of CO–CO2 and H2–H2O on the reduction degree of fluxed pellets: reduction mechanism within hydrogen-rich blast furnace

Effect of basicity on the reduction swelling behavior and mechanism of limestone fluxed iron ore pellets

The effect of iron-bearing mineral melting behavior on ash deposition during coal combustion

Characterization and comparison of deposits in a coal-fired rotary kiln for iron ore fluxed pellets and acidic pellets productions

Dissolution of Carbon-Containing Species in CaO-SiO 2 -Al 2 O 3 Slag

Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible

Degradation mechanism of high alumina refractory bricks by reaction with deposits in a rotary kiln for fluxed iron ore pellets production

Influence Mechanisms of Additives on Coal-based Reduction of Complex Refractory Iron Ore