Abstract:Pellet quality is one of the key technologies restricting the smelting of high proportion pellets in the blast furnace, especially the reduction swelling index of low silicon fluxed pellets. In this paper, the inhibition effect of grinding blast furnace return ore on the reduction swelling index of low silicon fluxed pellets was studied and application has been conducted in Shougang Jingtang Company. The experimental results show that the addition of 5–15% fine grinding blast furnace ore into pellet production significantly reduced the reduction swelling index of pellets from 23.5% to 14.3%. Microstructure and energy spectrum analysis shows that calcium ferrite, magnesium ferrite and liquid phase in the pellets with fine grinding blast furnace return ore increased obviously with a more uniform distributed liquid phase between hematite particles than in the basic group pellets and tended to be "homogenized". It is conducive to inhibiting the generation of ferric whiskers in the reduction process of the hematite phase, and thus contributes to the reduction of the swelling index. Since its implementation at Shougang Jingtang in 2020, this technology has yielded positive results. The fluxed pellets exhibit good quality with an alkalinity of 1.1, a SiO 2 content of 2.1%, and a reduction in the swelling index from 18.1% to 16.5%. Besides, the pellet ratio into blast furnace has reached 55%, the cumulative average utilization coefficient of three 5500 m 3 super-large blast furnaces is 2.43t/(m 3. d), and the monthly average for a single furnace reaches 2.62t/(m 3. d). Meanwhile, consumption reduction of calcium-containing flux slaked lime in fluxed pellets by 0.9% is greatly beneficial to reducing the cost of pellets and expanding the resources of pellet powder.

New Insights on Consolidation Behavior of Fe2O3 in the Fe3O4-CaO-MgO-SiO2 System for Fluxed Pellet Production: Phase Transformations and Morphology Evolution

Systematic Study on the Synthesis and Magnetism Properties of Manganese Ferrite MnFe2O4 by an Oxidation Roasting Process

Effects of SiO2, CaO and basicity on reduction behaviors and swelling properties of fluxed pellet at different stages

Phase Evolution Behavior during the Reduction Process of Medium‐Silica Fluxed Pellets

New understanding on formation mechanism of CaFe2O4 in Fe2O3 -Fe3O4-CaO-SiO2 system during sintering Process: Phase transformation and morphologies evolution

Consolidation Behavior of High-Fe Manganese Ore Sinters with Natural Basicity

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

Porosity, Mineralogy, Strength, and Reducibility of Sinter Analogues from the Fe2O3 (Fe3O4)-CaO-SiO2 (FCS) Ternary System

Softening–Melting Behaviors of a MgO-SiO2-FeO Slag System on a Coke Bed

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

Assessing Magnesia Effect on Preparing Refractory Materials from Ferrochromium Slag

Effect of CaO and MgO additives on the compressive strength of pellets: Exploration on the decisive stage during induration

Effect Of Magnesium Flux On Metallurgical Performance Of Pellets

Synergistic preparation of forsterite‐spinel refractory materials from ferronickel slag and ferrochromium slag

Influence of BaO and MgO on viscosity, crystalline phase, and structure of CaO–Al2O3–10%SiO2–20%CaF2-based system

Effect of basicity on the reduction swelling behavior and mechanism of limestone fluxed iron ore pellets

The study on the reconstruction and evolution pathway of free lime by hot stage mixing molten ironmaking and steelmaking slags in a laboratory

Effect of MgO and CaCO3 As Additives on the Reduction Roasting and Magnetic Separation of Beach Titanomagnetite Concentrate

Evolution of iron-based raw materials and their effect on the properties of MgO-Al-C slide plate materials

Effect of MgO Addition on the Metallurgical Properties of the Vanadium-Titanium Pellet with Simulating Blast Furnace Conditions

Research on influence of grinding blast furnace return ore on reduction swelling index of low silicon fluxed pellets and production practice