Abstract:This study aims to explore the influence mechanism of interfacial reaction in BF. The interfacial reaction behavior was analyzed, the thermodynamic and evolution processes of interfacial reaction were studied, and the influence of interfacial reaction on BF was discussed. The results show that: The desulfurization reaction mechanism can be considered as the electron transfer at slag-iron interface. The viscosity of molten iron shows a decreasing trend with the increase of sulfur content, and the surface tension of molten iron will rapidly decrease with sulfur content, so the interfacial reaction rate will be accelerated. The reduction of FeO occurs at slag-carbon interface, the content of FeO in slag often shows a decreasing trend along the height direction of BF, the erosion rate of carbon brick will increase under the condition of slag with high FeO content. The reduction of SiO 2 is achieved with the help of two gas-phase compounds SiO and SiS. The average Si content in molten iron decreases with the increase of BF volume, which indicates that the large BF is more conducive to achieving low-carbon smelting. The reduction of TiO 2 is carried out at the slag-carbon interface step by step, the valence state of Ti element gradually decreases. The iron-carbon interface in hearth has a significant effect on the erosion of carbon brick and the state of hearth. The wetting and erosion process at iron-carbon interface is clarified based on the cycle model, the carbon brick is eroded in this cycle. The time for the carburization of molten iron is limited, so the carbon content of molten iron cannot reach saturation, although there are a large number of iron-carbon interfaces in hearth. The change trend of maximum temperature on sidewall is opposite to the actual carbon content, the change in carburization behavior at iron-carbon interface is the essential reason for the fluctuation of erosion rate of carbon brick.

Gaseous fluorides formation mechanism in the roasting process of the fluorite-bearing iron concentrate

The Emission of Fluorine Gas During Incineration of Fluoroborate Residue.

Removal Mechanism of Mineral Impurities in Molybdenum Concentrate Treatment Process

Fluidization of Cohesive Fluorite Particles at Ambient/High Temperatures and Enhancement Methods

Improvement of roasting and metallurgical properties of fluorine-bearing iron concentrate pellets

Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process

Impact of Fluorine on the Thermal Stability of Phlogopite

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Phase Separation of Alkaline Earth Fluorosilicate Glass: A Strategy to Suppress Fluoride Evaporation

Study on the Migration and Release of Sulfur during the Oxidizing Roasting of High-Sulfur Iron Ore

Study on Thermal Decomposition Behavior and Roasting Desulfurization Mechanism of Jarosite Residue

Qualitative, Quantitative and Mechanism Research of Volatiles in the Most Commonly Used CaO–SiO2–CaF2–Na2Ο Slag During Casting Process

Interfacial reaction behavior in blast furnace and analysis of influence mechanism

Industrial test research on the fluorine removal technology during coal combustion

Effect of Fluorine on the Crystallization of Li2O-Al2O3-SiO2 Glasses

Speciation Analysis of the Fluoride in the Smelting Flue Gas of Copper and Nickel Metallurgy

New understanding on formation mechanism of CaFe2O4 in Fe2O3 -Fe3O4-CaO-SiO2 system during sintering Process: Phase transformation and morphologies evolution

Investigation of fluoride evaporation from CaF2–CaO–Al2O3–MgO–TiO2–(Li2O) slag for electroslag remelting

A combined computational-experimental study on the effect of Na2O on the fluoride volatilization in molten slags

Experimental Studies on Phase Transformation During Pyrite Concentrate Oxidation under Circulating Fluidized Bed (CFB) Roasting Conditions

Experimental on Fluorine Emission Characteristics and Influence Factors During Coal Combustion (Ⅰ)