Abstract:Ti(C,N)-xCrMnFeCoNi-(15wt.%-x)Ni cermets (x = 0wt.%, 5wt.%, 10wt.%, 15wt.%) were fabricated by low-pressure sintering. Because of the sluggish diffusion effect of high-entropy alloy (HEA), the grain growth of cermets containing HEA binder is inhibited. The FCC binder phases of cermets with CrMnFeCoNi/Ni binders generate a uniform dispersion, motivating to form many complete and moderate rim phases and wet the ceramic particles. Furthermore, the hardness of cermets roughly increases, while the strength and fracture toughness maintain the change tendency of rising the peak and then falling with CrMnFeCoNi additions. Ti(C,N)-5wt.% CrMnFeCoNi-10wt.% Ni cermets obtains a prominent mechanical property combination with hardness of 1646 ± 13.5 HV30, strength of 2181 ± 167.2 MPa and fracture toughness of 9.1 ± 0.11 MPa m1/2. Besides, the cermets containing CrMnFeCoNi/Ni binders obtain reduced friction coefficients and low wear rates at 750 °C compared with Ti(C,N)–Ni cermets and Ti(C,N)-HEA cermets. The superior high-temperature wear resistance is ascribed to the thermal softening resistance of CrMnFeCoNi, strengthening and toughening effect of CrMnFeCoNi/Ni on matrix and the transition of wear mechanism from abrasive wear and the removal of tribochemical layers to the removal of tribochemical layers. The cutting lifetime of cermets containing CrMnFeCoNi/Ni binders is increased by 40%–70% in comparison with Ti(C,N)–Ni cermets during machining 17-4 PH stainless steel. Concisely, Ti(C,N)-based cermets with outstanding mechanical, wear resistance and cutting properties can be obtained by partially replacing Ni with 5–10 wt.% CrMnFeCoNi.

Optimization for carbide distribution and ratio to improve the tribological performance of FCC-based (CrFeNi)100-xCx medium-entropy alloys (x = 0,4,8) fabricated by powder metallurgy

Effect of C additions to the microstructure and wear behaviour of CoCrFeNi high-entropy alloy

An atomic insight into the stoichiometry effect on the tribological behaviors of CrCoNi medium-entropy alloy

Mechanical and dry sliding tribological properties of CoCrNiNb medium-entropy alloys at room temperature

Microstructural and Tribological Characteristics of In Situ Induced Chrome Carbide Strengthened CoCrFeMnNi High-Entropy Alloys

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

Effects of NbC addition on mechanical and tribological properties of AlCrFeNi medium-entropy alloy

Enhanced wearing resistance of carbide reinforced FeCoNiCrMn high entropy alloy prepared by mechanical alloying and spark plasma sintering

Interstitial carbide synergistically strengthening high-entropy alloy CoCrFeNiV0.5C

Microstructure characterization and robust lubrication performance of CoCrNi medium entropy alloy with advanced electrochemical boronizing treatment

In-situ (Nb,Ti)C particles reinforced Ni0.6CoFe1.4Nb0.05 medium-entropy alloys

Effect of Aluminum on the Friction and Wear Behavior of AlxCrFeNi Medium‐Entropy Alloys

Effect of WC addition on microstructure and properties of powder metallurgy CoCrNi medium entropy alloy

An exceptionally wear-resistant CoFeNi 2 medium entropy alloy via tribo-induced nanocrystallites with amorphous boundaries

Enhancement mechanism of carbon fiber on the current-carrying tribological properties of Cf-Al2O3/Cu composites

Microstructure evolution and high temperature wear resistance of in-situ synthesized carbides reinforced NiCoFeCrSiMo high entropy alloy coatings fabricated by laser cladding

Microstructure and tribological properties of in-situ carbide/CoCrFeNiMn high entropy alloy composites synthesized by flake powder metallurgy

Effects of Ni/MoS2, Ag and Cr2O3 on the Microstructure and Mechanical Performance of a CoCrFeNi High-Entropy Alloy over a Wide Temperature Range

Metastable FeCrMnCo HEAs with the reinforcement of tungsten carbide fabricated by laser melting: Microstructure, mechanical properties and tribological behaviors

Realizing excellent tribological properties of BCC/FCC gradient high -entropy alloy coating via an in-situ interface reaction

Effects of CrMnFeCoNi additions on microstructure, mechanical properties and wear resistance of Ti(C,N)-based cermets