Abstract:Fe 50 Mn 30 Co 10 Cr 10 high entropy alloy (HEA) can be considered as a candidate structural and functional material, but the early failure during friction with heavy load can limit its more extensive applications. In this paper, a series of tungsten carbide particle reinforced Fe 50 Mn 30 Co 10 Cr 10 HEAs were fabricated by laser cladding technique, the influence of tungsten carbide content on microstructure, mechanical properties and tribological behaviors were explored systematically. The results indicated that the dissolution and diffusion of tungsten carbide could contribute to a wettability between tungsten carbide and HEA matrix, and grain refinement was caused by increasing tungsten carbide. The UTS and EL of the P10 sample are increased by simultaneously by 26.8% and 31.1% compared with UTS of 696 MPa and EL of 15.1% for P5 sample. UTS and EL were enhanced simultaneously owing to fine-grained strengthening and nanoscale precipitate strengthening. But higher content of tungsten carbide could cause lower elongation owing to the embrittlement of the materials. Just as this, Rockwell hardness and friction coefficient has an increasing trend with increasing tungsten carbide when an opposite trend exists in volume wear rate. It can indicate that hardness is a more important factor for wear resistance, and excellent wear resistance with 1.25 × 10 −5 mm 3 /(N·m) appear in higher-content WCp reinforced HEA composite. Furthermore, wear mechanism is transformed from abrasive wear in low-content tungsten carbide to adhesive wear in high-content tungsten carbide.

Enhanced wearing resistance of carbide reinforced FeCoNiCrMn high entropy alloy prepared by mechanical alloying and spark plasma sintering

Metastable FeCrMnCo HEAs with the reinforcement of tungsten carbide fabricated by laser melting: Microstructure, mechanical properties and tribological behaviors

Microstructure and tribological properties of in-situ carbide/CoCrFeNiMn high entropy alloy composites synthesized by flake powder metallurgy

Mechanical properties and wear behaviors of FeCoNiCrMnTix high-entropy alloys manufactured by vacuum arc melting

Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy

Microstructural and Tribological Characteristics of In Situ Induced Chrome Carbide Strengthened CoCrFeMnNi High-Entropy Alloys

Effect of interstitial carbides on tribological properties of Co21Cr21Fe21Ni21V14.5C1.5 high entropy alloy at elevated temperature

Microstructure and wear behavior of mechanically alloyed powder AlxMo0.5NbFeTiMn2 high entropy alloy coating formed by laser cladding

Effect of C additions to the microstructure and wear behaviour of CoCrFeNi high-entropy alloy

Microstructure, mechanical and tribological properties of oxide dispersion strengthened CoCrFeMnNi high-entropy alloys fabricated by powder metallurgy

AlxCoCrFeNiSi high entropy alloy coatings with high microhardness and improved wear resistance

Preparation, mechanical properties and wear resistance of dual-sized TiC particles reinforced high-entropy alloy cermet coating

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Microstructure evolution and high temperature wear resistance of in-situ synthesized carbides reinforced NiCoFeCrSiMo high entropy alloy coatings fabricated by laser cladding

Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance

Influence of Tungsten Content on Microstructural Evolution of Cobalt-Containing High-Entropy Alloy via Mechanical Alloying

Sliding Wear of Spark Plasma Sintered CrFeCoNiCu High-Entropy Alloy Coatings: Effect of Aluminum Addition

Robust wear performance of graphene-reinforced high entropy alloy composites

Effect of carbon content on microstructure, hardness and wear resistance of CoCrFeMnNiCx high-entropy alloys

A novel high-entropy alloy composite coating with core-shell structures prepared by plasma cladding

Microstructure and Properties of FeCrMnxAlCu High-Entropy Alloys and Coatings