Abstract:There is growing demand for high-power devices, wide bandgap SiC and GaN semiconductor materials in semiconductor market, and a drive to integrate die attach materials that can replace lead-containing solders. However, epoxy-based and solder materials face challenges to meet high thermal conductivity and survive elevated working temperatures. Pressure-assisted silver sintering has overcome these challenges, but downsides of pressure-assisted silver sintering are that it requires special equipment and for some applications, packages are unable to withstand the pressure required to facilitate sintering. Pressureless sintering materials could be processed using the same equipment as traditional die attach adhesives. It develops strong metal bonds to substrates, providing high thermal conductivity and withstanding high temperatures. However, compared to pressure-assisted sintering, pressureless materials may have difficulties to form a dense bondline structure if the formulation design is not optimized. Moreover, once the sintered structure is built during cure, further bondline reduction may induce additional stress. Therefore, it is critical that the pressureless sintering material’s mechanical properties are formulated to effectively manage stress and pass all reliability testing – especially for automotive packages. This paper will present the findings from a study that evaluated the impact of various formulation components – such as silver packing and resin chemistry – on the mechanical properties and interfacial bonding of pressureless sintering die attach adhesives. The effect on in-package reliability performance was also investigated to better understand material properties that can pass reliability testing while maintaining high thermal and electrical conductivity adhesive requirements.

Study on the Hygrothermal Reliability of Underfill/Passivation Layer Interface Using the Silane Coupling Agent as Adhesion Promoter

Effect of Silane Coupling Agents on the Underfill Adhesion undergoing Heat Aging Test

Study on effect of coupling agents on underfill material in flip chip packaging

Enhancement of underfill encapsulants for flip‐chip technology

The Investigation of Interface Effect on the Properties of Nanosilica-Based Underfill

Influence of moisture absorption in uncured underfill materials

Effect of coupling agents on thermal, flow, and adhesion properties of epoxy/silica compounds for capillary underfill applications

Adhesion improvement of epoxy resin to alloy 42 lead frame by silane coupling agents

The Synergistic Effects of Aminosilane Coupling Agent on the Adhesion Performance of Silane Primer for Silicone Resin Thermal Protection Coating

Enhancing Semiconductor Package Reliability through Mechanical Property Optimization of Pressureless Sintering Die Attach Adhesives

Study on Encapsulation Reliability

Silane modification of semi-curing epoxy surface: High interfacial adhesion for conductive coatings

Surface Treatment of Micron Silver Flakes with Coupling Agents for High-Performance Electrically Conductive Adhesives

Study on the Delamination Between Adhesive Film and Silicon in Stacked-Die Packaging

Effect of the Presence of a Silane Coupling Agent on Reaction Kinetics of Cationic Thermopolymerization of Epoxy Resin Adhesive

Synthesis of Novel Silane Coupling Agent and its Coupling Effects on Properties of Organosilicon Sealant

Effect of Silane Coupling Agent on Adhesion Properties between Hydrophobic UV-curable Urethane Acrylate and Acrylic PSA

Effects of high temperature and high humidity on the reliability of copper/epoxy bond

Superhydrophobic Nanocomposite Coating for Reliability Improvement of Microelectronics

Effect of siloxane quantity and ph of silane coupling agents and contact angle of resin bonding agent on bond durability of resin cements to machinable ceramic.

The effect of coupling agents on the anti-corrosion properties of acrylic latex coatings