Abstract:Aim: To evaluate the effect of various rotational motions on the torque/force generation, surface wear, and shaping ability of the ProGlider glide path instrument (Dentsply Sirona). Methodology: Mesiobuccal and mesiolingual canals of mandibular molars were selected based on the canal volume, length, angle of curvature (25°-40°), and radius of curvature (4-8 mm) after micro-computed tomographic scanning. The samples were randomly assigned to four groups (n = 13, each) according to movement kinematics [continuous rotation (CR; 300 rpm), optimum torque reverse motion (OTR; 180° forward and 90° reverse when torque >0.4 N cm), time-dependent reciprocal motion (TmR; 180° forward and 90° reverse), and optimal glide path motion (OGP; a combination of 90° forward, 90° reverse, 90° forward, and 120° reverse)]. Instrumentation was performed with an automated root canal instrument and torque/force analysing device. Maximum torque/force values, canal volume changes, and canal-centring ratios at 1, 3, 5, and 7 mm were evaluated. Surface defects (pits, grooves, microcracks, blunt cutting edges, and disruption of cutting edges) and spiral distortion on the ProGlider instrument were scored at the tip and 5 mm short of the tip before and after five consecutive uses with scanning electron microscopy. The Kruskal-Wallis test followed by Dunn's post-test with Bonferroni correction and Wilcoxon signed-rank test were used to analyse the data (α = 0.05). Results: Optimal glide path motion generated significantly less clockwise torque and greater upward force than other groups (p < .05). OGP resulted in significantly fewer surface defects than CR (p < .05). In OGP and CR, the tip exhibited more surface defects than 5 mm short of the tip (p < .05). CR resulted in greater volume changes than OGP and TmR (p < .05) and greater centring ratios (i.e., more deviation) than OGP at 1 mm and OTR at 3 mm (p < .05). Conclusions: Under laboratory conditions using the ProGlider instrument, OGP generated significantly less clockwise torque and greater upward force than the other rotatory motions. OGP generated fewer superficial defects than CR, and the three modes of reciprocal rotation better maintained the apical curvature of root canals than CR with the ProGlider instrument.

Shaping ability of rotary and reciprocating single-file systems in combination with and without different glide path techniques in simulated curved canals

[Glide Path Management of Rotary Nickel-Titanium Instruments in Simulated Root Canals].

Evaluation of shaping ability of different glide path instruments: a micro-computed tomography study

Shaping ability of ProTaper Gold and WaveOne Gold nickel-titanium rotary instruments in simulated S-shaped root canals

[Comparison of the Shaping Capability of Reciprocating Instruments in Simulated Canals in Vitro].

Comparison of the effect of different glide path files on amount of apically extruded debris in curved root canals

Gentlefile Versus Protaper in the Shaping Ability in Simulated J-shaped Root Canals

Influence of the Number of Pecking Motions at Working Length on the Shaping Ability of Single-file Systems in Long Oval-shaped Curved Canals

Effect of glide path preparation on the apical debris extrusion for three single-file systems

Effect of kinematics on the torque/force generation, surface characteristics, and shaping ability of a nickel-titanium rotary glide path instrument: An ex vivo study

Glide Path in Endodontics: A Literature Review of Current Knowledge

Shaping ability of R-phase nickel-titanium rotary instruments in simulated S-shaped canals

Comparative Assessment of the Shaping Ability of Reciproc Blue, WaveOne Gold, and ProTaper Gold in Simulated Root Canals

Assessment of Shaping Ability of ProTaper in Curved Canals

Surface Changes of PathFile after Glide Path Preparation: An Ex Vivo and In Vivo Study

Cone-beam computed tomographic analysis of apical transportation and centering ratio of ProTaper and XP-endo Shaper NiTi rotary systems in curved canals: an in vitro study

COMPARATIVE ANALYSIS OF APICAL EXTRUSION OF DEBRIS AND SHAPING ABILITY IN CURVED ROOT CANALS USING FOUR DIFFERENT NITI INSTRUMENTS

The influence of different root canal open access shapes on the use of rotary root canal enlargement

Influence of Different Glide Path Techniques on Microcrack Formation after Two Different Root Canal Preparation Treatments: Micro Computed Tomography Analysis

Comparative Evaluation of the Cyclic Fatigue Resistance of WaveOne Gold in Reciprocation, ProGlider in Rotary Motion, and Manual Files in a Reciprocating Handpiece Within Simulated Curved Canals: An In Vitro Study

Shaping outcomes of Reciproc Blue and Rotate in roots canals with band-shaped isthmuses: micro-CT study