Abstract:arious compositions of ceramic fiber slurry were prepared to study the influence of ceramic fiber layer on structure of SiC filtration membrane,effects of bonding agents on porosity and pore size distribution of filtration membrane,effect of pore-forming agent on porosity of filtration membrane as bonding agents content of 15%.Tape casting method was used to prepare the filtration membrane covering on the SiC green body.XRD and SEM were performed to examine the phase constitution and morphology.The porosity and pore size distribution of filtration membrane were tested by Archimedes method and bubble point method respectively.The results show that,there is a SiO_2 diffraction peak with the 2θ=22°in the filtration membrane sample sintered at 1300℃for 3h.When the composition of ceramic fiber slurry in mass ratio of aluminum silicate fibers:mullite fibers;CMC:water is 1:1:1.565,that is an appropriate content of mullite fibers,and the whole complex SiC ceramic filtration system has a perfect structure. However,if there is not any ceramic fiber layer,the filtration membrane drops into the gaps of SiC support body easily which has an impact on the structures and properties of complex SiC ceramic filtration membrane material.When the content of bonding agents increases from 5%to 25%,however,the porosity droppes from 46%to 29%and average pore size decreases from 11.916μm to 4.017μm.The porosity changes from 41%to 60%with the amount of bonding agents is fixed at 15%whereas the content of poreforming agents varies from 5%to 25%.

Composite ceramic fiber and preparation method thereof

Fabrication of Homogeneous Mullite-Based Fiber Porous Ceramics with High Strength and Porosity

Preparation method of C/C-SiC-MoSi2 ceramic-based composite material

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Carbon-bonded Carbon Fiber Composites Containing Uniformly Distributed Silicon Carbide

Preparation of the Percolative Nickel-Zinc Ferrite/Barium Titanate Composite Ceramics with Liquid-Solid Hybrid Method

Synthesis of Polytitanocarbosilane and Preparation of Si–C–Ti–B Fibers

Preparation method of composite material

Review on preparation technology of carbide resistant ultra-high temperature ceramic fiber

Preparation and Mechanical Properties of Ceramic Fiber Reinforced Titanium-Based Hybrid Laminated Composite

Using flexible hydrothermal carbon-coated continuous carbon fiber to fabricate Cf/ZrB2-SiC composites by fused deposition modeling and precursor infiltration pyrolysis

Preparation of silicon-nitride ceramic fibers with hafnium compounds loaded on the surface and the high temperature properties

Preparation and Characterization of An All Oxide Ceramic Matrix Composite by A Novel Method

Preparation and Characterization of SiC Composite Filtration Membrane Materials

Additive manufacturing of continuous carbon fiber-reinforced SiC ceramic composite with multiple fiber bundles by an extrusion-based technique

Fabrication and high-temperature strength of 2.5D SiO2f /SiO2 composites prepared by a combined vacuum impregnation and sol-gel method

Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration

Preparation of Silicon Carbide/Graphite Composite Ceramic Sealing Material by Liquid Silicon Inifltration Processing

High-performance aluminum/carbon composite material and preparation method thereof

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Biomimetic cellular-structured MCMB@WC composites with excellent mechanical properties