Abstract:Natural ventilation is a historical and promising passive design for conserving building energy. However, a noticeable scarcity exists in design strategies and academic studies on underground natural ventilation. This study introduces a two-level optimisation approach for underground natural ventilation, considering form and environmental characteristics. At the initial level, computational fluid dynamics simulations were employed to quantify and visualise the momentary ventilation performances of various passive strategies. These simulations also furnished precise wind pressure coefficients. Subsequently, at the second level, this study predicted the annual energy savings of the proposed prototype by integrating an airflow network model with building energy simulations. To adapt design parameters, sensitivity analysis and multi-objective optimisation techniques were applied. These numerical models underwent validation against measured data from analogous studies. The results reveal that the 'inlet buried pipe + outlet shaft' led to a 6.9 % reduction in energy consumption for heating, ventilation, and air-conditioning in underground hybrid ventilation compared to underground mechanical ventilation. Moreover, it achieved a 28.8 % decrease compared to aboveground mechanical ventilation. Optimising air temperatures following climate, soil conditions, and building characteristics is imperative, aligning with design standards. This study contributes a quantitative and visual approach to support underground natural ventilation and addresses the limitations of empirical designs, providing a foundation for future research and practical applications.

Computational studies on design optimization for Saccardo nozzle in tunnel ventilation

Numerical analysis of different ventilation schemes during the construction process of inclined tunnel groups at the Changheba Hydropower Station, China

Numerical simulation of flow field characteristics and pollutant transport under different ventilation modes

Parametric optimization of a novel air supply device used in tunnel fire

A Computational Fluid Dynamic Study for Temperature Uniformity at a Wind Tunnel Outlet with Effects of Heat Transfer along Tunnel Walls

Numerical Study on the Mean Velocity Distribution Law of Air Backflow and the Effective Interaction Length of Airflow in Forced Ventilated Tunnels

A Discussion on the Effective Ventilation Distance in Dead-End Tunnels

Numerical study on the vehicle exhaust dispersion in a curved tunnel: Effects of the tunnel radius and tilt angle of jet fan

Numerical Research on the Mixture Mechanism of Polluted and Fresh Air at the Staggered Tunnel Portals

Air flow behavior and gas dispersion in the recirculation ventilation system of a twin-tunnel construction

Study of the Diffusion Law of Harmful Gases in Tunnel Construction on Plateaus and Optimization of Ventilation Parameters.

Optimization principle and application of forced ventilation in railway tunnels based on improved TOPSIS theory and CFD simulations

Design and Construction Criteria of Twin Tunnel: Taking an Adverse Wind Condition Effects on Air Pollution Short Circuit at Tunnel Portals as a case

Experimental study on the performance of hybrid ventilation system combining forced longitudinal flow and shaft natural ventilation in tunnels

Ventilation system arrangement in large cross-section tunnels：a CFD simulation based on direct initial concentration assessment

Air flow and gas dispersion in the forced ventilation of a road tunnel during construction

A two-level optimisation approach for underground natural ventilation based on CFD and building energy simulations

Numerical study of natural ventilation in urban shallow tunnels: Impact of shaft cross section

3D Numerical Simulation of Ventilation and Purification of Whole Highway Tunnel

Full-scale experiment on the ventilation performance of vehicle-mounted mobile fans in a road tunnel