Abstract:Tunnel construction often relies on drilling and blasting. High dust pollution is one of the primary problems of drilling and blasting construction. The level of secondary blown dust pollution caused by ventilation matches that of dust pollution caused by drilling construction. In this study, a critical flow model and blown dust rate model for deposited dust were established via force analysis, which was validated against the test data. The research results showed that the characteristic airflow velocity for blowing dust particles with a 100 μm diameter reached approximately 0.42 m/s for tunnel diameter is 10 m, and the ventilation Re values under smooth and rough conditions were 2.3 × 10 5 and 1.4 × 10 5 , respectively. Furthermore, when ventilation Re reached 4 × 10 5 , the blown dust pollution rate caused by ventilation under smooth conditions was approximately 1.8 × 10 −2 kg/s. If dust particle size is more or less the critical dust particle size, the characteristic airflow velocity was increased. Moreover, the optimal velocity at which the deposited dust does not flow or move during tunnel construction was related to the tunnel size and roughness. For the smooth tunnel with a diameter of 10 m, the optimal ventilation velocity was 3.5 m/s. When the tunnel roughness was increased from 0.005 to 0.5 m, the optimal ventilation velocity decreased from 3.3 to 1.6 m/s. The deposited dust critical flow model and blown dust pollution rate model established in this study provide a sound theoretical basis for selecting the optimal velocity of tunnel ventilation and recognizing the risks of secondary blown dust pollution due to ventilation.

Numerical simulation of flow field characteristics and pollutant transport under different ventilation modes

Investigation on Pollution Characteristic and Energy Efficiency in Serial Tunnels with Short Break

Numerical analysis and control technology of gas accumulation in a large-scale specially-shaped tunnel passing through coal bearing strata

Study of the Diffusion Law of Harmful Gases in Tunnel Construction on Plateaus and Optimization of Ventilation Parameters.

Numerical Research on the Mixture Mechanism of Polluted and Fresh Air at the Staggered Tunnel Portals

Numerical simulations of ventilation to remove noxious gases during excavation of complicated tunnels

Analysis and comparison of airflow-respirable dust control and innovative ventilation environment in drilling construction tunnels

Numerical analysis of different ventilation schemes during the construction process of inclined tunnel groups at the Changheba Hydropower Station, China

Study on Dust Movement in Long Tunnel during Blasting Period

A Nonlinear Programming Approach for Multi-point Pollutant Discharge Control in Urban Vehicular Tunnels

3D Numerical Simulation of Ventilation and Purification of Whole Highway Tunnel

Investigation of efficient dust control strategy for construction tunnels: Ventilation System's implications for cleaner production

Parametric modeling study for blown-dust secondary pollution and optimal ventilation velocity during tunnel construction

Air flow and gas dispersion in the forced ventilation of a road tunnel during construction

CFD-based simulation study of dust transport law and air age in tunnel under different ventilation methods

Impact analysis of dust evolution pattern and determination of key ventilation parameters in highland highway construction tunnels

Air flow behavior and gas dispersion in the recirculation ventilation system of a twin-tunnel construction

The control effect of 3D spiral wind-curtain generator on respirable dust pollution during tunnelling process

Numerical study on pollutant removal performance of vortex ventilation with different pollution source locations

Spatiotemporal migration of dust pollution during the tunnel mucking process and development of dust removal trolley based on computational fluid dynamics technology