Abstract:Several series of six-cell photovoltaic test-modules—intact and with deliberately generated failures (micro-cracks, cell cracks, glass breakage and connection defects)—were artificially and naturally aged. They were exposed to various stress conditions (temperature, humidity and irradiation) in different climate chambers in order to identify (i) the stress-induced effects; (ii) the potential propagation of the failures and (iii) their influence on the performance. For comparison, one set of test-modules was also aged in an outdoor test site. All photovoltaic (PV) modules were thoroughly electrically characterized by electroluminescence and performance measurements before and after the accelerated ageing and the outdoor test. In addition, the formation of fluorescence effects in the encapsulation of the test modules in the course of the accelerated ageing tests was followed over time using UV-fluorescence imaging measurements. It was found that the performance of PV test modules with mechanical module failures was rather unaffected upon storage under various stress conditions. However, numerous micro-cracks led to a higher rate of degradation. The polymeric encapsulate of the PV modules showed the build-up of distinctive fluorescence effects with increasing lifetime as the encapsulant material degraded under the influence of climatic stress factors (mainly irradiation by sunlight and elevated temperature) by forming fluorophores. The induction period for the fluorescence effects of the polymeric encapsulant to be detectable was ~1 year of outdoor weathering (in middle Europe) and 300 h of artificial irradiation (with 1000 W/m2 artificial sunlight 300–2500 nm). In the presence of irradiation, oxygen—which permeated into the module through the polymeric backsheet—bleached the fluorescence of the encapsulant top layer between the cells, above cell cracks and micro-cracks. Thus, UV-F imaging is a perfect tool for on-site detection of module failures connected with a mechanical rupture of solar cells.

Development of Novel Frontsheets With Protective Coatings to Increase the Durability and Reliability of Glass‐Free Lightweight PV Modules

Material characterization of seven photovoltaic backsheets using seven accelerated test conditions

A Comparison of Emerging Nonfluoropolymer-Based Coextruded PV Backsheets to Industry-Benchmark Technologies

Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets

Water vapor permeability of polymeric packaging materials for novel glass‐free photovoltaic applications

Polymer multilayer film with excellent UV-resistance & high transmittance and its application for glass-free photovoltaic modules

XPS analysis of damp heat aged and fractured polymer/glass laminates

Anti-pollution Film for PV Modules installed at Railway Systems

Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules

Chemical and mechanical interfacial degradation in bifacial glass/glass and glass/transparent backsheet photovoltaic modules

Lifetime Evaluation of Photovoltaic Polymeric Backsheets under Ultraviolet Radiation: From Chemical Properties to Mechanical Modeling

Investigation on the Effect of Accumulated Charge-Induced Degradation on Multilayer Photovoltaic Insulating Backsheets Based on Atomic Force Microscopy

Glass/glass photovoltaic module reliability and degradation: a review

Comparison of Degradation Behavior of Newly Developed Encapsulation Materials for Photovoltaic Applications under Different Artificial Ageing Tests

Mechanically Robust and Self-Cleaning Antireflective Coatings for Photovoltaic Modules

Preparation of hyperbranched polyurethane acrylates and their properties in UV curable nano-SiO2 composite coatings for PET optical film

Surface Treatment of Flexible Barrier Film for Improved Stability of Organic Photovoltaic Mini Modules

Polar Wax as Adhesion Promoter in Polymeric Blend Films for Durable Photovoltaic Encapsulants

UV LED Curable Perfluoropolyether (PFPE)-Urethane Methacrylate Transparent Coatings for Photonic Applications: Synthesis and Characterization

Enhancing UV Stability of Perovskite Solar Cells with Transparent Fluorinated Polyimide

Non-Destructive Failure Detection and Visualization of Artificially and Naturally Aged PV Modules