Abstract:It is one of the important requisites in the engine mounting system design to accurately determine the inertia properties of a powertrain rigid body. Observing that trifilar torsional pendulum can precisely measure mass moment of inertia of complex rigid body, an experimental methodology for inertia parameter identification is proposed, in which the rigid body is positioned at 6~9 different orientations represented with three-points on the rigid body. The key points include: (1) the orientation of the rigid body is indirectly determined with three points on the rigid body, and a movable coordinate system is defined with the normal vector of plane formed by the three on-body points; (2) distances between the three on-body points and reference points on the pendulum plate (defining a global coordinate system) are measured for each test, and global coordinates of the three on-body points and the coordinate transformation between the two coordinate frames are determined；(3) the rotation axis orientation of the rigid body and the moment of inertia for each test under the movable coordinates are calculated; and (4) utilizing least square principle, the optimal intersection “point” of the rotation axis of each test is determined to be the center of gravity, and then a set of linear equations derived from the transformation formula of rigid-body moment of inertia about different axis rotation is solved to identify inertia tensor of the rigid body. Some factors that may produce errors still exist in the proposed identification procedure, but they can be estimated and effectively reduced at every step with least square method. The practicability and reliability of the procedure is illustrated by error analysis, validation of cuboid mass block and many tests of real powertrains.

Error Caused by Swing Angle and the Correction Method in Three-wire Pendulum Experiment

Error analysis of inertia parameters measurement for irregular-shaped rigid bodies using suspended trifilar pendulum

Investigation of Heterodyne Interferometer Technique for Dynamic Angle Measurement: Error Analysis and Performance Evaluation

Study on the Motion Analysis and Influencing Factors of Simple Pendulum and Double Pendulum

Error analysis in measurement of rigid body rotational inertia by falling body method

Swing Response Measuring and Nonlinear Error Modification of Suspended Structure System in Pendulum Vibration Mode

Influence of the tilt error motion of the rotation axis on the test of the equivalence principle with a rotating torsion pendulum

Error separating technology of inductosyn angle- measuring system in limiting rotation axis system

Effect of Angular Amplitude on the Result of a Pendulum Experiment

On The Errors Of Rotating Coil Magnetometers

Influence of Rotary Errors of Centrifuge Spindle on Accelerometer Input Accuracy

Experimental Study and Error Analysis in the experiment of"measuring acceleration of gravity by single pendulum"

Calibrate the Gravity Acceleration by Improved Pendulum Experiment System and SPSS

Research on Measuring Methods for Aircraft's Moment of Inertia based on Composite Torsion Pendulum Movement

Measurement of Moment of Inertia Based on Real-time Computing Damping Ratio

Error Modeling of Inductosyn Angle Measuring System

A Study on Measurement of Gravity Acceleration by Simple Pendulum

Orthogonality of Inductosyn Angle-Measuring System Error and Error-Separating Technology

Error Testing and Compensation of an Inductosyn-Based Angular Measurement System

Analysis and Design of the Moment of Inertia(MOI) Measuring Instrument with High Accuracy

IMPROVEMENT OF EXPERIMENTAL IDENTIFICATION METHOD WITH TRIFILAR TORSIONAL PENDULUM FOR INERTIA PROPERTIES OF LARGE-SCALE RIGID-BODY