Abstract:Failure response of the modern high strength steel grades shows a diverse pattern compared to the conventional highly ductile steels. In automotive sheet forming applications of the high strength steels, fracture could be observed prior to necking or the post necking deformation is very limited. The differences in the underlying damage mechanisms contribute to the different ways of damage development and the interaction of damage with plastic localization and strain hardening creates various failure patterns. Therefore, it is critical to clearly identify the phase for damage initiation and understand the relation between plastic localization, damage and fracture, as these patterns significantly influence the safety assessment in the forming process of steels. Inverse modelling approaches are being used to bridge the gap between experiments and numerical simulations. However, this technique shows significant discrepancies when strain heterogeneity is experienced, especially since the determination of the material parameters is based on comparison on a global scale with force and elongation measurements. An iterative finite element model update (FEMU) procedure integrated with optical full field measurement technique was executed which extended the possibilities to identify the material ductile damage and fracture behavior on a local level with significantly higher accuracy. To identify the material plastic and damage behavior of the automotive dual phase steel (DP-K1000) under study, experiments are conducted on dog-bone, notched tensile, central hole and shear specimens at various strain rates. Full field deformation data was obtained by digital image correlation (DIC). A vigorous and general framework for the inverse identification of the strain hardening behavior up to fracture of the automotive high strength steel was studied. A hybrid damage mechanics model (extended Modified Bai-Wierzbicki) that combines a phenomenological criterion for damage initiation related to the microstructure degradation of materials and a continuum damage mechanics based damage evolution law for progressive damage accumulation till final fracture is employed using a VUMAT in the finite element (FE) scheme. To exclude the convergence (plastic instability) problems, a displacement driven finite element simulation was used while minimizing the discrepancy between the experimental and numerical surface strain fields and force values. A visual mapping procedure was adopted to realize identical reference frames and therefore identical peripheries for the specimen in DIC and FE model. This mapping includes a transformation and interpolation function from FE results to the DIC datum points. Successful identification of the material parameters was achieved based on a combined Gauss-Newton and Levenberg-Marquardt algorithm which require the evaluation of the gradient of the objective function to update the unknown parameters in an appropriate direction. The optimization problem of the inverse modelling in the current work was described by a cost function based on the least square norm of the differences of the surface strain fields. Overall cost function formulation is not dependent on the experimental or finite element meshes and includes rigid body motions. The residual was minimized at once for all the displacements by Gauss-Newton scheme in space-time, which is defined by spatial domain and temporal domain. The optimization of the constitutive parameters was directly achieved by minimizing this image residual in an iterative manner. The adopted methodology helped in determining macroscopic crack initiation instant and location from experiments. Local variables such as equivalent plastic strain, stress triaxiality and Lode angle parameter were evaluated from the critical element for the determination of the damage initiation locus which was then fitted by a non-linear least squares method with a trust-region algorithm in Matlab. The identified damage initiation locus and plastic localization phenomena served as an evaluation criteria for the formability of the dual phase automotive steel.

Swaging-Induced Fracture Features

Evolution of in-plane strain fields onset of a plastically deforming crack in zirconium

Fracture, my friend: the cutting of gummy metals

The significance of deformation mechanisms on the fracture behavior of phase reversion-induced nanostructured austenitic stainless steel

Fracture in stretch flanging by single point incremental forming

Microstructural Influence on Fracture Toughness of IF Steel and DP Steel

Grain boundary engineering: fatigue fracture

Nanograin formation in dimple ridges due to local severe-plastic-deformation during ductile fracture

Influence of FGM coating on the dynamic fracture behavior of multiple cracks in a homogeneous half-plane under in-plane loading

Anisotropic Ductile Fracture Of A Stainless Steel Under Biaxial Loading: Experiments And Predictions

Experimental Evaluation of Microvoid Characteristics and Relationship with Stress and Strain for Ductile Fracture

Influence of Process Fluctuations on Residual Stress Evolution in Rotary Swaging of Steel Tubes

Experimental investigation on the fracture surface features of heat-treated red sandstone containing fissure under constant amplitude low cycle impact using 3D digital reconstruction

Dynamic tensile response of Zr-based bulk amorphous alloys: Fracture morphologies and mechanisms

Revealing plastic localization and ductile damage initiation features with integrated DIC and FEM

Ductile fracture in functionally graded materials: Insight into crack behavior within the gradient interface

Microstructural Dependence of Anisotropic Fracture Mechanisms in Cold-Drawn Pearlitic Steels

Material Flow in Infeed Rotary Swaging of Tubes

Evolution of in-plane stresses induced fracture behaviors of Tailor Welded Blanks subjected to non-uniformly distributed load

Microstructural features governing fracture of a two-dimensional amorphous solid identified by machine learning

Evolution of inner wall wrinkle defects in the sinking zone of a thick-walled steel tube during radial forging