Abstract:The proton exchange membrane (PEM) fuel cell is an ideal automotive power source with great potential, owing to its high efficiency and zero emissions. However, the durability and life-span limit its large-scale application. Complex automotive operating conditions significantly accelerate fuel cell aging, and result in diverse degradation mechanisms that require comprehensive understanding. This review focuses on three harsh conditions of open-circuit/idling, dynamic load, and startup-shutdown. In-situ and ex-situ accelerated stress tests (ASTs) for the three conditions are summarized in terms of methodology, research objectives, and conditions of application. Reversible decay may arise during ASTs and lead to an over-estimation of the aging state, of which the causes and recovery procedures are emphasized. The degradation mechanisms are elaborated systematically according to parameter characteristics, microstructure, and aging reactions. First, increased gas permeation and a high cathode potential during open-circuit/idling combine to intensify generation of free radicals that cause membrane degradation. Pt degradation and migration are also accelerated, characterized by increased Pt particle growth and precipitation in the membrane. The debate regarding the effect of Pt precipitation on membrane degradation is resolved based on a literature review. Second, dynamic load brings about changes in the thermal/humidity state, altered reactant demand, and potential cycling, which lead to mechanical degradation, gas starvation, and Pt particle growth, respectively. To account for the accelerated particle growth, electrochemical Ostwald ripening and increased Pt dissolution are reviewed. Third, an air/hydrogen boundary appears in the anode under startup-shutdown condition and causes carbon corrosion in the local cathode via the reverse current mechanism. The cathode thereby suffers from severe and non-uniform structural damage and even structural collapse, accompanied by Pt agglomeration and detachment. Meanwhile, difficulties in mass transfer arise because of ionomer redistribution, decreased porosity, and carbon surface hydrophilization. In addition, cold start produces severe damage to component structures. This paper seeks to guide further investigation into improved fuel cell durability via mechanism analysis, condition optimization, control strategy development, structural design of the membrane electrode assembly, and component material development.

Study on the degradation mechanism of the frame for membrane electrode assembly in proton exchange membrane fuel cell

Unveiling the long-term degradation mechanisms of the sealing structures for durable PEM fuel cells by ex situ accelerated stability evaluation of a membrane electrode assembly

Degradation Study of Membrane Electrode Assembly with PTFE/Nafion Composite Membrane Utilizing Accelerated Stress Technique

Degradation Characteristics of Membrane Electrode Assembly under Drive Cycle Test Protocol

Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack

Diagnosis of Membrane Electrode Assembly Degradation with Drive Cycle Test Technique

A Polymer Electrolyte Fuel Cell Life Test Using Accelerating Degradation Technique

Insight into the evolution of membrane chemical degradation in proton exchange membrane fuel cells:From theoretical analysis to model developing

Key Components Degradation in Proton Exchange Membrane Fuel Cells: Unraveling Mechanisms through Accelerated Durability Testing

Quantification and evolution on degradation mechanisms of proton exchange membrane fuel cell catalyst layer under dynamic testing conditions

Ionomer degradation in catalyst layers of anion exchange membrane fuel cells

Performance degradation and process engineering of the 10 kW proton exchange membrane fuel cell stack

Research Progress of Proton Exchange Membrane Failure and Mitigation Strategies

Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions

Local degradation in proton exchange membrane fuel cells with dead-ended anode

Degradation mechanism analysis of substrate and microporous layer of gas diffusion layer in proton exchange membrane fuel cell

A New Insight into the Chemical Degradation of Proton Exchange Membranes in Water Electrolyzers

XPS Analysis of Polymer Membrane Degradation in PEMFCs

The Degradation Study of Nafion/Ptfe Composite Membrane in Pem Fuel Cell under Accelerated Stress Tests

Dynamic Modeling of Pt Degradation and Mitigation Strategies in Polymer Electrolyte Membrane Fuel Cells

Quantification on Degradation Mechanisms of Polymer Exchange Membrane Fuel Cell Cathode Catalyst Layers During Bus and Stationary Durability Test Protocols