Abstract:Effective sinusoidal voltage regulation is of permanent importance for grid-forming converters. Usually, the following two types of schemes are employed to achieve a high level of performance: 1) single-loop voltage and 2) dual-loop voltage-current control. The performance of both schemes has comprehensively been evaluated in this work, based on the developed discrete-time model of the LC-filtered grid-forming converter. The challenges of insufficient stability margin, constraint bandwidth, and high sensitivity to parameter variation faced by the single-loop control scheme have been addressed, if the high-performance resonant controllers are employed for voltage regulation. Alternatively, the dual-loop control does not experience such issues with the inclusion of inner-current loop which provides active damping for the overall system. The essence of the inner-current loop is identified based on the discrete root locus analysis. Also, to obtain the highest damping and most enhanced stability, the criterion for current loop design has been addressed and a method for optimal tuning of the inner-current loop is developed, where the original plant with the one-sampling delay and the current gain are considered as the equivalent plant for the voltage controller. Experimental results have verified the effectiveness of the developed method for regulation of grid-forming converters.

What problem does this paper attempt to address?

The paper aims to address the issue of effective sinusoidal voltage regulation in Grid-Forming Converters (GFCs). Specifically, the paper explores two commonly used control schemes: single-loop voltage control and dual-loop voltage-current control, and provides a comprehensive evaluation of these two schemes. 1. **Single-Loop Voltage Control**: This scheme uses only capacitor voltage feedback for regulation. However, this method has shortcomings in terms of high-frequency switching ripple and resonance stability issues caused by the LC filter. When high-performance resonant controllers are used, the single-loop control scheme has insufficient stability margin, limited bandwidth, and is very sensitive to parameter variations. 2. **Dual-Loop Voltage-Current Control**: This scheme includes an inner current loop that can provide active damping, thereby improving the overall system stability. The paper points out that dual-loop control can overcome the issues present in single-loop control and determines the nature of the inner current loop through discrete root locus analysis. Additionally, the paper proposes a method to optimize the inner current loop to achieve maximum damping and enhanced stability. In summary, the main objective of the paper is to address the stability issues faced by GFCs in practical applications by optimizing the design of the inner current loop in dual-loop control and to validate the effectiveness of the proposed method.

Optimal Tuning of the Current Loop for Dual-Loop Controlled Grid-Forming Converters Based on Active Damping Optimization

A Robust Dual-Loop Current Control Method with a Delay-Compensation Control Link for LCL-Type Shunt Active Power Filters

Current Control of LCL-Type Shunt APFs: Damping Characteristics, Stability Analysis, and Robust Design Against Grid Impedance Variation

A Systematic Approach Via IIR Filters for Enhancing the Robustness of LCL-Type Shunt Active Power Filters to Grid Impedance

Design of Digital Filter-based Highly Robust Active Damping for LCL-filtered Grid-tied Inverters

A New Optimized Pole Placement Strategy of Grid-Connected Inverter with Lcl-Filter Based on State Variable Feedback and State Observer

High-Performance Resonant Controller Implemented in the Discrete-Time Domain for Voltage Regulation of Grid-Forming Converters

Robust Current Control Method for LCL-Type Shunt Active Power Filters with Inverter-Side Current Feedback Active Damping

An Alternative Control Synthesis for Stability Enhancement of Digital-Controlled LCL-filtered Grid-Connected Inverter

Optimized Parameter Design of the Dual-Loop Control for Grid-Forming VSCs With LC Filters

Comprehensive and Robust Parameter Design of Grid-Forming Converter with Inner Dual-Loop under Weak Grid Condition

Digital Low-Pass-Filter-Based Single-Loop Damping For Lcl-Filtered Grid-Tied Inverters

Resonance Damping and Harmonic Suppression for Grid-Connected Current-Source Converter

Robust Active Damping Control for LCL-Type Shunt Active Power Filters

An Enhanced Active Damping Control Method for <i>LCL</i>-Type Shunt APFs with Proportional-Resonant-Differential Inverter-Side Current Feedback

Dual Current Feedback Active Damping for Improving Transient Performance of LCL-filter-based Grid-connected Inverter

Current control optimization for grid-tied inverters with grid impedance estimation

Analysis And Optimizing Method Of Transient Performance For Lcl-Based Grid-Connected Inverter With Passive Damping

Effect of Control Damping on Small-Signal Stability of Grid-Forming VSCs Considering Interaction Between Inner and Outer Loops

Modeling and Analysis of Inner Controls Effects on Damping and Synchronizing Torque Components in VSG-Controlled Converter

A Novel Damping Control of Grid-Connected Converter Based on Optimal Split-Inductor Concept