Abstract:This paper presents the design, analysis, and testing of a parallel-kinematic high-bandwidth XY nanopositioning stage driven by piezoelectric stack actuators. The stage is designed with two kinematic chains. In each kinematic chain, the end-effector of the stage is connected to the base by two symmetrically distributed flexure modules, respectively. Each flexure module comprises a fixed-fixed beam and a parallelogram flexure serving as two orthogonal prismatic joints. With the purpose to achieve high resonance frequencies of the stage, a novel center-thickened beam which has large stiffness is proposed to act as the fixed-fixed beam. The center-thickened beam also contributes to reducing cross-coupling and restricting parasitic motion. To decouple the motion in two axes totally, a symmetric configuration is adopted for the parallelogram flexures. Based on the analytical models established in static and dynamic analysis, the dimensions of the stage are optimized in order to maximize the first resonance frequency. Then finite element analysis is utilized to validate the design and a prototype of the stage is fabricated for performance tests. According to the results of static and dynamic tests, the resonance frequencies of the developed stage are over 13.6 kHz and the workspace is 11.2 μm × 11.6 μm with the cross-coupling between two axes less than 0.52%. It is clearly demonstrated that the developed stage has high resonance frequencies, a relatively large travel range, and nearly decoupled performance between two axes. For high-speed tracking performance tests, an inversion-based feedforward controller is implemented for the stage to compensate for the positioning errors caused by mechanical vibration. The experimental results show that good tracking performance at high speed is achieved, which validates the effectiveness of the developed stage.

A parallel 3-DOF micro-nano motion stage for vibration-assisted milling

A piezodriven three dimensional micropositioning stage for nano-manufacturing

Development of a Novel Interchangeable Stage for Multidimensional Vibration-Assisted Micromilling

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

Design And Analysis Of Two Dimensional X-Y Micropositioning Stage

A Novel Hybrid Actuation Mechanism Based XY Nanopositioning Stage with Totally Decoupled Kinematics

A 6-Degree-of-freedom Piezoelectric Vibration Microstage with Reduced Cross-Axis Coupling

Design, optimization, and characterization of an XY nanopositioning stage with multi-level spatial flexure hinges for high-precision large-stroke motion guidance

Micro-vibration Stage Using Piezo Actuators

Design of a decoupled 2-DOF translational parallel micro-positioning stage

Design, Analysis and Testing of A Parallel-Kinematic High-Bandwidth Xy Nanopositioning Stage

Design and control of a decoupled two degree of freedom translational parallel micro-positioning stage

Voice Coil Motor-Driven Multi-Dof Compliant Parallel Micropositioning Stage Based on a Large Range Beam-Based Spherical Hinge and Fully Symmetrical Layout

Design of a Linear Macro–micro Actuation Stage Considering Vibration Isolation

A Piezo-Driven 2-Dof Compliant Micropositioning Stage with Remote Center of Motion

Design, Control of an Aerostatic X-Y Planar Motion Stage for Precision Positioning

Design and Driving of a 3-DOF Electromagnetic Direct-Drive Nanopositioning Stage with Long Stroke

Modeling And Testing Of A Novel Decoupled Xy Nano-Positioning Stage

Development of a Parallel-Kinematic High-Speed XY Nanopositioning Stage

Design, Analysis and Testing of a Novel Decoupled 2-DOF Flexure-Based Micropositioning Stage

Development of a Flexure-Based XY Positioning Stage for Micro/nano Manipulation