Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In situ repairing solid electrolyte interphase of faded graphite electrodes using a temperature–voltage coupling method

Correlating Graphite Surface with Interphase for Fast‐Charging and Low‐Temperature Operation

Interphase Engineering Enhanced Electro‐chemical Stability of Prelithiated Anode

Artificial Solid Electrolyte Interphase to Address the Electrochemical Degradation of Silicon Electrodes

Building a Rigid-Soft Coupling Interphase by Reduction-Oxidation Collaborative Approach with Lithium Difluorobis(oxalato) Phosphate Additives

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries

Organic salts with unsaturated bond and diverse anions as substrates for solid electrolyte interphase on graphite anodes

Insight into the Enforced Stability of the Solid Electrolyte Interphase on the Graphite Anode by Prelithiation

Offsetting Initial Lithium Loss By Pre-Forming SEI Layer on Graphite Surface

Controllable solid electrolyte interphase precursor for stabilizing natural graphite anode in lithium ion batteries

Inhibiting Solvent Co‐Intercalation in a Graphite Anode by a Localized High‐Concentration Electrolyte in Fast‐Charging Batteries

Promoting the reversibility of lithium ion/lithium metal hybrid graphite anode by regulating solid electrolyte interface

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Rectifying Solid Electrolyte Interphase Structure for Stable Multi-Dimensional Silicon Anodes

Improving the graphite/electrolyte interface in lithium-ion battery for fast charging and low temperature operation: Fluorosulfonyl isocyanate as electrolyte additive

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

Achieving Sei Preformed Graphite in Flow Cell to Mitigate Initial Lithium Loss

In Situ Constructing of Rigid‐Soft Coupling Solid–Electrolyte Interphase on Silicon Electrode toward High‐Performance Lithium Ion Batteries

Experimental study on solid electrolyte interphase of graphite electrode in Li-ion battery by surface analysis technique

In Situ Solid Electrolyte Interphase from Spray Quenching on Molten Li: A New Way to Construct High-Performance Lithium-Metal Anodes.