Abstract:Fluorinated electrolytes based on fluoroethylene carbonate (FEC) have been considered as promising alternative electrolytes for high-voltage and high-energy capacity lithium-ion batteries (LIBs). However, the compatibility of the fluorinated electrolytes with graphite negative electrodes is unclear. In this paper, we have systematically investigated, for the first time, the stability of fluorinated electrolytes with graphite negative electrodes, and the result shows that unlike the ethylene carbonate (EC)-based electrolyte, the FEC-based electrolyte (EC was totally replaced by FEC) is incapable of forming a protective and effective solid electrolyte interphase (SEI) that protects the electrolyte from runaway reduction on the graphite surface. The reason is that the lowest unoccupied molecular orbital energy levels are also lowered by the introduction of fluorine into the solvent, and the FEC solvent has poorer resistance against reduction, leading to instability on the graphite negative electrode. To tackle this problem, two lithium salts of lithium bis(oxalato)borate and lithium difluoro(oxalato)borate (LiDFOB) have been investigated as negative-electrode film-forming additives. Incorporation of only 0.5 wt % LiDFOB to a FEC-based electrolyte [1.0 M LiPF6 in 3:7 (FEC-ethyl methyl carbonate)] results in excellent cycling performance of the graphite negative electrode. This improved property originates from the generation of a thinner and better quality SEI film with little LiF by the sacrificial reduction of the LiDFOB additive on the graphite negative electrode surface. On the other hand, this additive can stabilize the electrolyte by scavenging HF. Meanwhile, the incorporated LiDFOB additive has positive influence on the interphase layer on the positive electrode surface and significantly decreases the amount of HF formation, finally leading to improved cycling stability and rate capability of LiNi0.5Mn1.5O4 electrodes at a high cutoff voltage of 5 V. The data demonstrate that the LiDFOB additive not only exhibits a superior compatibility with graphite but also improves the electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 positive electrodes considerably, confirming its potential as a prospective, multifunctional additive for 5 V fluorinated electrolytes in high-energy capacity lithium-ion batteries (LIBs).

Improving the graphite/electrolyte interface in lithium-ion battery for fast charging and low temperature operation: Fluorosulfonyl isocyanate as electrolyte additive

Fluorinated and sulfurized solid-electrolyte interface enabling durable and fast-charging graphite/LiFePO4 pouch batteries

Inhibiting Solvent Co‐Intercalation in a Graphite Anode by a Localized High‐Concentration Electrolyte in Fast‐Charging Batteries

In-situ Formation of a LiF-rich Interphase for Graphite Anode Operated at Low Temperatures

Fluorine-Terminated Self-Assembled Monolayers Grafted Graphite Anode Inducing a LiF-Dominated SEI Inorganic Layer for Fast-Charging Lithium-Ion Batteries.

Balanced solvation/de-solvation of electrolyte facilitates Li-ion intercalation for fast charging and low-temperature Li-ion batteries

Fluorine-Rich Electrolyte Additive for Achieving Dendrite-Free Lithium Anodes at Low Temperatures

Fluorinated Solvent Molecule Tuning Enables Fast‐Charging and Low‐Temperature Lithium‐Ion Batteries

Establish an Advanced Electrolyte/Graphite Interphase by an Ionic Liquid-Based Localized Highly Concentrated Electrolyte for Low-Temperature and Rapid-Charging Li-Ion Batteries

Interface engineering with fluorine-doped amorphous carbon thin film coating on graphite anodes compatible with non-flammable sulfone-based electrolyte

Correlating Graphite Surface with Interphase for Fast‐Charging and Low‐Temperature Operation

Fluorinated Electrolytes for Li-Ion Batteries: The Lithium Difluoro(oxalato)borate Additive for Stabilizing the Solid Electrolyte Interphase

Constructing a Highly Robust Interface Film for Enhancing Rate Performance of Graphite Anode via a Novel Electrolyte Additive

Mitigating Swelling of the Solid Electrolyte Interphase using an Inorganic Anion Switch for Low‐temperature Lithium‐ion Batteries

Bifunctional Interphase Promotes Li+ De‐Solvation and Transportation Enabling Fast‐Charging Graphite Anode at Low Temperature

The Synergetic Effect of Lithium Bisoxalatodifluorophosphate and Fluoroethylene Carbonate on Dendrite Suppression for Fast Charging Lithium Metal Batteries

Regulating the interfacial chemistry of graphite in ethyl acetate‐based electrolyte for low‐temperature Li‐ion batteries

Li3PO4‐Enriched SEI on Graphite Anode Boosts Li+ De‐Solvation Enabling Fast‐Charging and Low‐Temperature Lithium‐Ion Batteries

A facile synthesis of non-aqueous LiPO2F2 solution as the electrolyte additive for high performance lithium ion batteries

High-Voltage Graphite//LiNi0.5Mn1.5O4 Full Cell with Bis(fluorosulfonyl)Imide and bis(trifluoromethyl)Sulfonylimide Ionic Liquid Electrolytes

Interfacial Fluoride Engineering Enabled Robust LiF-rich Solid Electrolyte Interphase to Reduce Active Lithium Loss in Rechargeable Lithium Battery