Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Standardization of Gaseous Ozone Disinfectant Efficacy, Recommendations of Methods and Conditions for Future Comparative Studies

Ozone Decontamination of Medical and Nonmedical Devices: An Assessment of Design and Implementation Considerations

The application of ozone within the food industry, mode of action, current and future applications, and regulatory compliance

Evaluation of the Effectiveness of Two Automated Room Decontamination Devices Under Real-Life Conditions

Ozone disinfection of waterborne pathogens: A review of mechanisms, applications, and challenges

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Ozone Gas: Scientific Justification and Practical Guidelines for Improvised Disinfection using Consumer-Grade Ozone Generators and Plastic Storage Boxes.

Methods to assess environmental surface disinfectants against viruses: the quest and recommendations for a globally harmonized approach to microbicide testing

Evaluating the Potential, Applicability, and Effectiveness of Ozone Sterilization Process for Medical Devices

Development and Improvement of an Effective Method for Air and Surfaces Disinfection with Ozone Gas as a Decontaminating Agent

Analysis of design criteria for biological post-treatment of ozonated wastewater treatment plant effluent

The efficacy of commercial decontamination agents differs between standardised test settings and research laboratory usage for a variety of bacterial species

Ozone Strong Water Dosing as Optimized Ozonation Process for Micropollutants Reduction in Wastewater Treatment Plants

Inactivation kinetics of selected pathogenic and non-pathogenic bacteria by aqueous ozone to validate minimum usage in purified water

Enveloped Virus Inactivation on Personal Protective Equipment by Exposure to Ozone

1219. Disinfection of Surfaces Contaminated with Carbapenemase Producing Acinetobacter baumannii Using Ozone Under Complex Room Conditions

Use of Hydrogen Peroxide Vapour for Microbiological Disinfection in Hospital Environments: A Review

Effectiveness of ozone generated by a dielectric barrier discharge plasma reactor against multidrug-resistant pathogens and Clostridioides difficile spores

Supplementary Material to "opinion: the Germicidal Effect of Ambient Air (open Air Factor) Revisited"

Wastewater disinfection by ozone: main parameters for process design

Confirmation of the sterilization effect using a high concentration of ozone gas for the bio-clean room