Normal sinus heart rate redefined.

D. Spodick

DOI: https://doi.org/10.1093/EURHEARTJ/14.7.865

IF: 39.3

1993-07-01

European Heart Journal

Abstract:

What problem does this paper attempt to address?

Ozone Gas: Scientific Justification and Practical Guidelines for Improvised Disinfection using Consumer-Grade Ozone Generators and Plastic Storage Boxes.

Robert Dennis,Avery Cashion,Steven Emanuel,Devin Hubbard

DOI: https://doi.org/10.37714/josam.v2i1.35

2020-04-06

The Journal of Science and Medicine

Abstract:We describe direct measurements of ozone concentration achievable in small enclosed containers (plastic storage boxes) for use as improvised decontamination systems for small articles such as disposable PPE (N95 masks, nitrile gloves, etc.), clothing, mail and small packages, food, and other miscellaneous articles. The emphasis is on the reliable and sustained generation of ozone gas concentrations of sufficient concentration and duration to create an effective virucidal environment to achieve more than 95% to 99% viral inactivation, based upon the data already published in the peer-review literature on this topic. The suggestion that ozone be used to inactivate virus is certainly not a new idea. Our objective in this report is to make clear that the necessary levels of ozone can be improvised using simple, easy-to-use, inexpensive, and widely available supplies, and that there is every theoretical and experimental reason to believe that this approach is as highly effective in viral inactivation by ozone as are the far more expensive, complex, cumbersome, and less available equivalent ozone (and other) disinfectant systems that have themselves become unavailable during times of pandemic crisis. Using multiple types of readily available commercial ozone generators, concentration in the tested improvised enclosure is tracked over time to assess ozone charging and decay rates, and the ozone quenching effects of items placed in the box. Generator performance is compared against published ozone dosage values for virucidal and antimicrobial activity. Bubbler and box-fan-type ozone generators were found to be effective at achieving and maintaining target concentrations of 10ppm ozone or higher, whereas automotive cigarette lighter and universal serial bus type plug in “air freshener” ozone generators could not achieve the target concentrations in these experiments. Calculations and practical guidelines for assembly and effective use of an ozone box for improvised decontamination are offered. The majority of this report is directed toward the scientific justification and rationale for this approach. The end of the document summarizes the findings and offers simplified designs for the construction and use of ozone boxes as an improvised method of disinfection.
Efficient Facemask Sterilization via Forced Ozone Convection

Joseph Schwan,Troy R. Alva,Giorgio Nava,Carla Berrospe Rodriguez,Justin W. Chartron,Joshua Morgan,Lorenzo Mangolini

DOI: https://doi.org/10.48550/arXiv.2007.09280

IF: 4.506

2020-07-17

Medical Physics

Abstract:During the beginning of 2020, the Covid-19 pandemic took the world by surprise, rapidly spreading undetected between and within many countries and wreaking havoc on the global economy both through death tolls and lockdowns. Healthcare professionals treating the coronavirus patients grapple with a massive and unprecedented shortage of Facepiece Respirators (FPRs) and other personal protective equipment (PPE), which act as fundamental tools to protect the health of the medical staff treating the patients affected by the coronavirus. While many FPRs are designed to be disposable single-use devices, the development of sterilization strategies is necessary to circumvent future shortages. Here, we describe the development of a plasma-based method to sterilize PPE such as FPRs with ozone. The novel design uses a flow-through configuration where ozone directly flows through the fibers of the PPE through the maintenance of a pressure gradient. Canonical ozone-based methods place the mask into a sealed ozone-containing enclosure but lack pressurization to permeate the mask fibers. In this device, ozone is created through an atmospheric pressure Dielectric Barrier Discharge (DBD) fed with compressed air. Due to limited supply and clinical need of FPRs, we demonstrated sterilization with surgical masks. We demonstrate rapid sterilization using E. coli as a model pathogen. A flow-through configuration enables a >400% improvement of the sterilization efficiency with respect to the canonical approach. This method has potential for a broad and cost-effective utilization. Using the power supply from a readily available plasma ball toy, a plastic box, a glass tube, steel mesh, and 3D printed components, we designed and tested an extremely affordable portable prototype system for rapid single mask sterilization which produced comparable results to its large high-cost equivalent.
Ozone treatment effectively eliminates SARS-CoV-2 from infected face masks.

Elizabeth Córdoba-Lanús,Omar García-Pérez,Francisco Rodríguez-Esparragón,Carlos J. Bethencourt-Estrella,Laura B. Torres-Mata,Angeles Blanco,Jesús Villar,Oscar Sanz,Juan J. Díaz,José L. Martín-Barrasa,Pedro Serrano-Aguilar,José-Enrique Piñero,Bernardino Clavo,Jacob Lorenzo-Morales

DOI: https://doi.org/10.1371/journal.pone.0271826

IF: 3.7

2022-07-24

PLoS ONE

Abstract:The current COVID-19 pandemic is causing profound health, economic, and social problems worldwide. The global shortage of medical and personal protective equipment (PPE) in specialized centers during the outbreak demonstrated the need for efficient methods to disinfect and recycle them in times of emergency. We have previously described that high ozone concentrations destroyed viral RNA in an inactivated SARS-CoV-2 strain within a few minutes. However, the efficient ozone dosages for active SARS-CoV-2 are still unknown. The present study aimed to evaluate the systematic effects of ozone exposure on face masks from hospitalized patients infected with SARS-CoV-2. Face masks from COVID-19 patients were collected and treated with a clinical ozone generator at high ozone concentrations in small volumes for short periods. The study focused on SARS-CoV-2 gene detection (assessed by real-time quantitative polymerase chain reaction (RT-qPCR)) and on the virus inactivation by in vitro studies. We assessed the effects of different high ozone concentrations and exposure times on decontamination efficiency. We showed that high ozone concentrations (10,000, 2,000, and 4,000 ppm) and short exposure times (10, 10, and 2 minutes, respectively), inactivated both the original strain and the B.1.1.7 strain of SARS-CoV-2 from 24 contaminated face masks from COVID-19 patients. The validation results showed that the best condition for SARS-CoV-2 inactivation was a treatment of 4,000 ppm of ozone for 2 minutes. Further studies are in progress to advance the potential applications of these findings.

multidisciplinary sciences
Growth and development in patients with untreated clefts.

L. Will

DOI: https://doi.org/10.1597/1545-1569(2000)037<0523:GADIPW>2.0.CO;2

2000-11-01

The Cleft Palate-Craniofacial Journal

Abstract:Motivated by the observation that individuals with clefts of the lip and palate exhibit different facial growth than those individuals without facial clefts, many studies have assessed dentofacial morphology in order to understand these differing growth patterns. This review addresses current understanding of facial growth in patients with untreated clefts, drawing broad conclusions about the state of the art, and presents a challenge for cleft care in the future.
Inactivation of Multiple Human Pathogens by Fathhome's Dry Sanitizer Device: Rapid and Eco-Friendly Ozone-Based Disinfection

Ryan Kenneally,Quentin Lawrence,Ella Brydon,Kenneth H. Wan,Jian-Hua Mao,Subhash C. Verma,Amir Khazaieli,Susan E. Celniker,Antoine M. Snijders

DOI: https://doi.org/10.1016/j.medmic.2022.100059

2022-01-01

Medicine in Microecology

Abstract:SARS-CoV-2 spread rapidly, causing millions of deaths across the globe. As a result, demand for medical supplies and personal protective equipment (PPE) surged and supplies dwindled. Separate entirely, hospital-acquired infections have become commonplace and challenging to treat. To explore the potential of novel sterilization techniques, this study evaluated the disinfection efficacy of Fathhome's ozone-based, dry-sanitizing device by dose and time response. Inactivation of human pathogens was tested on non-porous (plastic) surfaces. 95.42–100% inactivation was observed across all types of vegetative microorganisms and 27.36% inactivation of bacterial endospores tested, with no residual ozone detectable after completion. These results strongly support the hypothesis that Fathhome's commercial implementation of gas-based disinfection is suitable for rapid decontamination of a wide variety of pathogens on PPE and other industrially relevant materials.
Ozone efficacy for the control of airborne viruses: Bacteriophage and norovirus models

Marie-Eve Dubuis,Nathan Dumont-Leblond,Camille Laliberté,Marc Veillette,Nathalie Turgeon,Julie Jean,Caroline Duchaine

DOI: https://doi.org/10.1371/journal.pone.0231164

IF: 3.7

2020-04-10

PLoS ONE

Abstract:This study was designed to test the efficacy of an air treatment using ozone and relative humidity (RH) for the inactivation of airborne viruses. Four phages (φX174, PR772, MS2 and φ6) and one eukaryotic virus (murine norovirus MNV-1) were exposed to low ozone concentrations (1.23 ppm for phages and 0.23 ppm for MNV-1) and various levels of RH for 10 to 70 minutes. The inactivation of these viruses was then assessed to determine which of the tested conditions provided the greatest reduction in virus infectivity. An inactivation of at least two orders of magnitude for φX174, MS2 and MNV-1 was achieved with an ozone exposure of 40 minutes at 85% RH. For PR772 and φ6, exposure to the reference condition at 20% RH for 10 minutes yielded the same results. These findings suggest that ozone used at a low concentration is a powerful disinfectant for airborne viruses when combined with a high RH. Air treatment could therefore be implemented inside hospital rooms ventilated naturally.
Safe and Effective Use of Ozone as Air and Surface Disinfectant in the Conjuncture of Covid-19

Elena Grignani,Antonella Mansi,Renato Cabella,Paola Castellano,Angelo Tirabasso,Renata Sisto,Mariangela Spagnoli,Giovanni Fabrizi,Francesco Frigerio,Giovanna Tranfo

DOI: https://doi.org/10.3390/gases1010002

2020-12-24

Gases

Abstract:The present paper extrapolates quantitative data for ozone virucidal activity on the basis of the available scientific literature data for a safe and effective use of ozone in the appropriate cases and to explore the safety measures developed under the stimulus of the current emergency situation. Ozone is a powerful oxidant reacting with organic molecules, and therefore has bactericidal, virucidal, and fungicidal actions. At the same time, it is a toxic substance, having adverse effects on health and safety. Its use is being proposed for the disinfection of workplaces’ and public places’ atmosphere, and for disposable masks and personal protective equipment disinfection for reuse, with particular reference to the COVID-19 pandemic outbreak. Ozone can be generated in situ by means of small, compact ozone generators, using dried ambient air as a precursor. It should be injected into the room that is to be disinfected until the desired ozone concentration is reached; after the time needed for the disinfection, its concentrations must be reduced to the levels required for the workers’ safety. The optimal use of ozone is for air and surface disinfection without human presence, using a concentration that is effective for the destruction of viruses, but not high enough to deteriorate materials.
Effects of metformin treatment on serum levels of C-reactive protein and interleukin-6 in women with polycystic ovary syndrome: a meta-analysis

Jiao Wang,Lingyan Zhu,Kaixiang Hu,Yun-Liang Tang,Xiangxia Zeng,Jian-ying Liu,Ji-Xiong Xu

DOI: https://doi.org/10.1097/MD.0000000000008183

IF: 1.6

2017-09-01

Medicine

Abstract:Background: Metformin is effective for the treatment of polycystic ovary syndrome (PCOS), but conflicting results regarding its impact on serum levels of C-reactive protein (CRP) and interleukin-6 (IL-6) in women with PCOS have been reported. To provide high-quality evidence about the effect of treatment with metformin on CRP and IL-6 in PCOS, relevant studies that assessed the serum levels of CRP and IL-6 in women with PCOS receiving metformin treatment were reviewed and analyzed. Methods: A literature search was conducted in the Science Citation Index, PubMed, Embase, and Cochrane Library databases, and personal contact was made with the authors. Random-effects model was used to estimate the standardized mean differences (SMDs) with 95% confidence intervals (95% CIs). To ensure synthesis of the best available evidence, subgroup analysis, sensitivity analysis, meta-regression analysis, and publication bias were performed. Results: Of 216 studies identified, 20 were included in the meta-analysis (7 prospective, nonrandomized studies, and 13 randomized control trials). Data suggest that serum levels of CRP were decreased after metformin treatment in PCOS patients with an SMD (95% CI) of −0.86 [−1.24 to −0.48] and P = .000 (random-effects). However, significant heterogeneity was detected across studies (I2 = 84.6% and P = .000). Unfortunately, the sources of heterogeneity were not found by subgroup analysis and meta-regression analysis. Serum IL-6 concentrations were not significantly changed after metformin treatment in PCOS with an SMD (95% CI) of −0.48 [−1.26 to 0.31] and P > .05 (random-effects). Significant heterogeneity was also detected across studies (I2 = 90.9% and P = .000). The subgroup analysis suggested that treatment-related reductions in serum IL-6 levels were significantly correlated with BMI, whereas the sources of heterogeneity were not found. In addition, we noticed that metformin treatment could decrease BMI in the CRP and IL-6 related studies (SMD = −0.45, 95% CI: −0.68 to −0.23; SMD = −0.44, 95% CI: −0.73 to −0.16). Conclusion: This meta-analysis showed a significant decrease of serum CRP levels, especially in obese women, but no significant changes in IL-6 levels after metformin treatment in women with PCOS. In general, the data support that early metformin therapy may ameliorate the state of chronic inflammation in women with PCOS. Considering the obvious heterogeneity reported in the literature, further well-designed investigations with larger samples are needed to ascertain the long-term effects of metformin on chronic inflammation in PCOS.
Ozone as a disinfectant in laboratory surfaces against the SARS-cov-2 coronavirus

Alcántara- Quintana Luz Eugenia,López-Mendoza Carlos Miguel,Díaz de León- Martínez Lorena,Rodríguez Aguilar Maribel,Flores-Ramírez Rogelio

DOI: https://doi.org/10.15406/jmen.2022.10.00364

2022-09-15

Journal of Microbiology & Experimentation

Abstract:Introduction: The treatment of surfaces with ozone has become important due to the ease of the SARS-CoV-2 virus to reach places where it is not normally disinfected with chemical treatments. Ozone can be supplied from two sources: ozone generators and electrostatic air purifiers, both of which leave no residues that damage the environment. Ozone is highly effective against bacteria, fungi, mold, and virus inactivation. The objective of this work was to investigate the disinfection of surfaces naturally contaminated with SARS-CoV-2 and bacteria by using ozone plasma. Material and methods: We examined the disinfection capacity of ozone plasma against the SARS-CoV-2 and bacteria, through a study of natural contamination in situ. Amplification of specific genes by real-time reverse transcription-polymerase chain reaction of SARS-CoV-2 and microbiological culture of bacteria was performed before and after the disinfection process. Results: SARS-CoV-2 was not detected in all assays; bacteria were not cultivable after disinfection with ozone plasma. Conclusion: Disinfection with ozone plasma technology can be an alternative for their use in a shortage situation of others disinfects. Implications for the use of disinfection technologies of surfaces lab’s and the safety of laboratory personnel are discussed.
Effectiveness of Ultraviolet-C Light and a High-Level Disinfection Cabinet for Decontamination of N95 Respirators

Jennifer L Cadnum,Daniel F Li,Sarah N Redmond,Amrita R John,Basya Pearlmutter,Curtis J Donskey,Jennifer L. Cadnum,Daniel Li,Sarah N. Redmond,Amrita R. John,Curtis Donskey

DOI: https://doi.org/10.20411/pai.v5i1.372

2020-05-02

Pathogens and Immunity

Abstract:Background-Shortages of personal protective equipment (PPE) including N95 filtering facepiece respirators is an urgent concern in the setting of the global COVID-19 pandemic. Decontamination of PPE could be useful to maintain adequate supplies, but there is uncertainty regarding the efficacy of decontamination technologies.Methods-A modification of the American Society for Testing and Materials standard quantitative carrier disk test method (ASTM E-2197-11) was used to examine the effectiveness of ultraviolet-C (UV-C) light, a high-level disinfection cabinet that generates aerosolized peracetic acid and hydrogen peroxide, and dry heat at 70°C for 30 minutes for decontamination of bacteriophages Phi6 and MS2 and methicillin-resistant Staphylococcus aureus (MRSA) inoculated onto 3 commercial N95 respirators. Three and 6 log10 reductions on N95 respirators were considered effective for decontamination and disinfection, respectively. Results-UV-C administered as a 1-minute cycle in a UV-C box or a 30-minute cycle by a room decontamination device reduced contamination but did not meet criteria for decontamination of the viruses from all sites for any of the N95s. The high-level disinfection cabinet was effective for decontamination of all the organisms from the N95s and achieved disinfection with 3 disinfection cycles over ~60 minutes. Dry heat at 70°C for 30 minutes was not effective for decontamination of the bacteriophages. Conclusions-UV-C could be useful to reduce contamination on N95 respirators. However, the UV-C technologies studied did not meet our criteria for decontamination under the test conditions used. The high-level disinfection cabinet was effective for decontamination of N95s and met criteria for disinfection with multiple cycles.
N95 reprocessing by low temperature sterilization with 59% vaporized hydrogen peroxide during the 2020 COVID-19 pandemic

Maimuna Jatta,Carolyn Kiefer,Harsh Patolia,Jin Pan,Charbel Harb,Linsey C Marr,Anthony Baffoe-Bonnie,Linsey C. Marr

DOI: https://doi.org/10.1016/j.ajic.2020.06.194

IF: 4.303

2021-01-01

American Journal of Infection Control

Abstract:Structured BackgroundResponse to the COVID-19 pandemic by hospital systems has been strained by severe shortages in personal protective equipment (PPE), particularly N95 respirators. Recently, the Centers for Disease Control and Prevention endorsed decontamination strategies to prolong the lifespan of single use respirators. Battelle and Duke University have validated hospital protocols to decontaminate respirators using vaporized hydrogen peroxide (VHP) at 30%-35% concentrations. To prolong our supply of respirators, we evaluated and implemented VHP decontamination at 59% hydrogen peroxide concentration while detailing the effects of this process on the filtration efficiency and quantitative fit of single-use respirators. This study may help other health systems develop local solutions to their N95 mask shortage during this COVID-19 pandemic.MethodsN95 respirators (3M 8211 FF and 9210 FF) that were treated with 5 and 10 cycles of VHP by the V-PRO® maX Low Temperature Sterilization System were evaluated quantitatively for filtration efficiency as well as with quantitative fit testing per Occupational Safety and Health Administration standards. A decontamination protocol was concurrently implemented at our institution. This process involved depositing used masks, reprocessing, and re-distributing treated masks efficiently back to frontline providers. Furthermore, we implemented patient safety officers (PSO) on COVID-19/person under investigation (PUI) units to ensure optimized donning/doffing of respirators through frontline provider education.ResultsThere were no statistically significant changes in mean filtration efficiency between the control and VHP-treated respirators. Furthermore, both treated and untreated respirators demonstrated fit factors above the minimum pass requirement.ConclusionWe have successfully demonstrated that N95 respirator decontamination with VHP at 59% hydrogen peroxide can be safely utilized to decontaminate single-use N95 respirators without significant effects on filtration efficiency or quantitative fit testing. With the COVID-19 pandemic and N95 respirator shortage, health systems without access to commercial decontamination processes should investigate the viability of such a process in their facilities.

infectious diseases,public, environmental & occupational health
Ozone Decontamination of Medical and Nonmedical Devices: An Assessment of Design and Implementation Considerations

Emmanuel I. Epelle,Andrew Macfarlane,Michael Cusack,Anthony Burns,Jude A. Okolie,Parag Vichare,Luc Rolland,Mohammed Yaseen

DOI: https://doi.org/10.1021/acs.iecr.2c03754

2023-03-01

Industrial & Engineering Chemistry Research

Abstract:The control of infectious diseases can be improved via carefully designed decontamination equipment and systems. Research interest in ozone (a powerful antimicrobial agent) has significantly increased over the past decade. The COVID-19 pandemic has also instigated the development of new ozone-based technologies for the decontamination of personal protective equipment, surfaces, materials, and indoor environments. As this interest continues to grow, it is necessary to consider key factors affecting the applicability of lab-based findings to large-scale systems utilizing ozone. In this review, we present recent developments on the critical factors affecting the successful deployments of industrial ozone technologies. Some of these include the medium of application (air or water), material compatibility, efficient circulation and extraction, measurement and control, automation, scalability, and process economics. We also provide a comparative assessment of ozone relative to other decontamination methods/sterilization technologies and further substantiate the necessity for increased developments in gaseous and aqueous ozonation. Modeling methodologies, which can be applied for the design and implementation of ozone contacting systems, are also presented in this review. Key knowledge gaps and open research problems/opportunities are extensively covered including our recommendations for the development of novel solutions with industrial importance.

engineering, chemical
Design and Fabrication of Portable PPE Kit Sterilization

Abhishek Mane,Siddhi Cheulkar,Romil Arora,Aarti Singh,M. A. Gulbarga

DOI: https://doi.org/10.22214/ijraset.2022.41881

2022-04-30

International Journal for Research in Applied Science and Engineering Technology

Abstract:Abstract: Medical demands during the COVID-19 pandemic have triggered a grave shortage of medical-grade personal protective equipment (PPE), especially, N95 respirators. N95 respirators are critical for the personal protection of medical providers and others when being exposed to individuals with infections caused by the SARS- CoV-2 coronavirus. To address the shortage of PPE Kit & N95 respirators, innovative methods are needed to decontaminate coronaviruses from N95 respirators & PPE Kit, allowing them to be safely reused by healthcare workers. For this research, we use a commercial ozone disinfecting cabinet to examine the efficacy of ozone-based disinfection of a conservative surrogate virus for SARS-CoV-2/Ultra Violet radiation, Chlorination, washing with soap and heating are some methods of sterilizing. Ultra Violet light is thebest sterilizing and disinfectant agent, used for domestic as well as clinical purpose. Food packets, books, stationery, medical equipment’s, toys, electronic gadgets like mobile phones, laptops, wrist watches, etc. can be sterilized with UV radiation whereasother methods of sterilization cannot be used. UV light does not release any waste andis eco-friendly, if used in a controlled manner. UV radiation is a range of electromagnetic waves with shorter wavelength (high frequency and energy). The wavelength from 100-280 nm known as UV-C isthe best disinfectant used for purifying water, air, sterilizing vegetables and surgical equipment’s. Research has shown that UV-C wavelength can kill harmful fungi, protozoa, bacteria and viruses like SARS- CoV-2 Virus. The article describes the construction of a low-cost UV-C Sterilizer Boxwhere UV radiation is taking place in a closed environment. Safety features are also incorporated to prevent humans from UV light exposure. The germicidal property of ultraviolet-C is well known. This review will cover the most commonly described methods for sterilization of PPE Kit, namely, ultraviolet germicidal irradiation. These techniques have been tested previously and have demonstrated efficacy in reducing or inactivating viral and bacterial pathogens, although testing against SARS-CoV-2 specifically has not been done. Moreover, it must be emphasized that proper disposal after a single use is still ideal under normal circumstances. Keywords: UV, UV-C LED, Sterilize, Ultraviolet-C; decontamination; N95 respirator; peracetic acid; SARS-CoV-2, ozone
Disinfection of Respirators with Ultraviolet Radiation

Dianne L Poster,Matthew Hardwick,C Cameron Miller,Michael A Riley,W W Shanaka I Rodrigo,Andras E Vladar,John D Wright,Christopher D Zangmeister,Clarence Zarobila,Jeremy Starkweather,John Wynne,Jason Yilzarde

DOI: https://doi.org/10.6028/jres.126.058

2022-03-25

Abstract:Data for interpreting virus inactivation on N95 face filtering respirators (FFRs) by ultraviolet (UV) radiation are important in developing UV strategies for N95 FFR disinfection and reuse for any situation, whether it be everyday practices, contingency planning for expected shortages, or crisis planning for known shortages. Data regarding the integrity, form, fit, and function of N95 FFR materials following UV radiation exposure are equally important. This article provides these data for N95 FFRs following UV-C irradiation (200 nm to 280 nm) in a commercial UV-C enclosure. Viral inactivation was determined by examining the inactivation of OC43, a betacoronavirus, inoculated on N95 FFRs. Different metrological approaches were used to examine irradiated N95 FFRs to determine if there were any discernible physical differences between non-irradiated N95 FFRs and those irradiated using the UV-C enclosure. Material integrity was examined using high-resolution scanning electron microscopy. Form, fit, and function were examined using flow resistance, tensile strength, and particle filtration measurements. A separate examination of filter efficiency, fit, and strap tensile stress measurements was performed by the National Personal Protective Technology Laboratory. Data from these metrological examinations provide evidence that N95 FFR disinfection and reuse using the UV-C enclosure can be effective.
Production of Singlet Oxygen from Photosensitizer Erythrosine for Facile Inactivation of Coronavirus on Mask

Yunhan Jiang,Yulong Fu,Xiaojie Xu,Xiaoguang Guo,Feiyu Wang,Xin Xu,Yao-Wei Huang,Jiyan Shi,Chaofeng Shen

DOI: https://doi.org/10.1016/j.envint.2023.107994

IF: 11.8

2023-01-01

Environment International

Abstract:The global health crisis caused by the COVID-19 pandemic has led to a surge in demand and use of personal protective equipment (PPE) such as masks, putting great pressure on social production and the environment. It is urgent to find an efficient and non-destructive disinfection method for the safe reuse of PPE. This study proposes a PPE disinfection method that uses erythrosine, a U.S. Food and Drug Administration-approved food dye, as photosensitizer to produce singlet oxygen for virus inactivation, and indicates the completion of disinfection by its photobleaching color change. After spraying 100 & mu;L of 10 & mu;M erythrosine on the surface of the mask for 3 times and light exposure for 25 min, the titer of coronavirus decreased by more than 99.999%, and the color of erythrosine on the mask surface disappeared. In addition, the structure of the mask was intact and the filtration efficiency was maintained at > 95% after 10 cycles of erythrosine treatment. Therefore, this disinfection method can provide at least 10 cycles of reuse with the advantages of high safety and convenient, and the completion of disinfection can be indicated by its photobleaching, which is suitable for hospitals and daily life to reduce the consumption of PPE.
Development of a highly effective low-cost vaporized hydrogen peroxide-based method for disinfection of personal protective equipment for their selective reuse during pandemics

Vikram Saini,Kriti Sikri,Sakshi Dhingra Batra,Priya Kalra,Kamini Gautam

DOI: https://doi.org/10.1186/s13099-020-00367-4

2020-06-19

Gut Pathogens

Abstract:Abstract Background Personal Protective Equipment (PPE) is required to safely work with biological agents of bacterial (i.e. Mycobacterium tuberculosis) or viral origin (Ebola and SARS). COVID-19 pandemic especially has created unforeseen public health challenges including a global shortage of PPE needed for the safety of health care workers (HCWs). Although sufficient stocks of PPE are currently available, their critical shortage may develop soon due to increase in demand and depletion of existing supply lines. To empower our HCWs and ensure their continued protection, proactive measures are urgently required to develop procedures to safely decontaminate the PPEs to allow their “selective reuse” during contingency situations. Methods Herein, we have successfully developed a decontamination method based on vaporized hydrogen peroxide (VHP). We have used a range of concentration of hydrogen peroxide to disinfect PPE (coveralls, face-shields, and N-95 masks). To ensure a proper disinfection, we have evaluated three biological indicators namely Escherichia coli , Mycobacterium smegmatis and spores of Bacillus stearothermophilus , considered as the gold standard for disinfection processes. We next evaluated the impact of repeated VHP treatment on physical features, permeability, and fabric integrity of coveralls and N-95 masks. Next, we performed Scanning Electron Microscopy (SEM) to evaluate microscopic changes in fiber thickness of N-95 masks, melt blown layer or coverall body suits. Considering the fact that any disinfection procedure should be able to meet local requirements, our study included various regionally procured N-95 masks and coveralls available at our institute All India Institute of Medical Sciences (AIIMS), New Delhi, India. Lastly, the practical utility of VHP method developed herein was ascertained by operationalizing a dedicated research facility disinfecting used PPE during COVID-19. Results Our prototype studies show that a single VHP cycle (7–8% Hydrogen peroxide) could disinfect PPE and PPE housing room of about 1200 cubic feet (length10 ft × breadth 10 ft × height 12 ft) in less than 10 min, as noted by a complete loss of B. stearothermophilus spore revival. The results are consistent and reproducible as tested in over 10 cycles in our settings. Further, repeated VHP treatment did not result in any physical tear, deformity or other appreciable change in the coverall and N-95 masks. Our permeation tests evaluating droplet penetration did not reveal any change in permeability post-VHP treatments. Also, SEM analysis indeed revealed no significant change in fiber thickness or damage to fibers of coveralls or melt blown layer of N-95 masks essential for filtration. There was no change in user comfort and experience following VHP treatment of PPE. Based on results of these studies, and parameters developed and optimized, an institutional research facility to disinfect COVID-19 PPE is successfully established and operationalized with more than 80% recovery rate for used PPE post-disinfection. Conclusions Our study, therefore, successfully establishes the utility of VHP to effectively disinfect PPE for a possible reuse as per the requirements. VHP treatment did not damage coveralls, cause physical deformity and also did not alter fabric architecture of melt blown layer. We observed that disinfection process was successful consistently and therefore believe that the VHP-based decontamination model will have a universal applicability and utility. This process can be easily and economically scaled up and can be instrumental in easing global PPE shortages in any biosafety facility or in health care settings during pandemic situation such as COVID-19.

gastroenterology & hepatology,microbiology
Disinfection effect of pulsed xenon ultraviolet irradiation on SARS-CoV-2 and implications for environmental risk of COVID-19 transmission

Sarah Simmons,Ricardo Carrion,Kendra Alfson,Hilary Staples,Chetan Jinadatha,William Jarvis,Priya Sampathkumar,Roy F. Chemaly,Fareed Khawaja,Mark Povroznik,Stephanie Jackson,Keith S Kaye,Robert M. Rodriguez,Mark Stibich

DOI: https://doi.org/10.1101/2020.05.06.20093658

2020-05-11

Abstract:Abstract Prolonged survival of SARS-CoV-2 on environmental surfaces and personal protective equipment (PPE) may lead to these surfaces transmitting disease to others. This article reports the effectiveness of a pulsed xenon ultraviolet (PX-UV) disinfection system in reducing the load of SARS-CoV-2 on hard surfaces and N95 respirators. Chamber slides and N95 respirator material were directly inoculated with SARS-CoV-2 and exposed to different durations of PX-UV disinfection. For hard surfaces, disinfection for 1, 2, and 5 minutes resulted in 3.53 Log 10 , >4.54 Log 10 , and >4.12 Log 10 reductions in viral load, respectively. For N95 respirators, disinfection for 5 minutes resulted in >4.79 Log 10 reduction in viral load. We found that PX-UV significantly reduces SARS-CoV-2 on hard surfaces and N95 respirators. With the potential to rapidly disinfectant environmental surfaces and N95 respirators, PX-UV devices are a promising technology for the reduction of environmental and PPE bioburden and to enhance both HCW and patient safety by reducing the risk of exposure to SARS-CoV-2.
Ozone: A Potential Oxidant for COVID-19 Virus (SARS-CoV-2)

Chedly Tizaoui

DOI: https://doi.org/10.1080/01919512.2020.1795614

2020-07-27

Ozone: Science and Engineering

Abstract:<span>Currently, no medicine has demonstrated efficacy in treating the ongoing pandemic COVID-19 caused by SARS-CoV-2 virus. Being a potent oxidant, ozone is lethal against most bacteria and viruses found in water, or on surfaces and aerosols. Ozone has also been successfully used to treat several viral diseases such as Ebola and HIV Hepatitis B and C. Using molecular modeling, this study evaluated the reactivity of ozone toward representative key molecules in the structure of SARS-CoV-2. The results show that ozone is able to attack the proteins and lipids of the virus's spikes and envelope, particularly the amino acids tryptophan, methionine and cysteine, and the fatty acids, arachidonic acid, linoleic acid, and oleic acid. Ozone also attacks the N-glycopeptides of the spike protein subunits 1 and 2, though at lower reactivity. Disruption of the structure of SARS-CoV-2 could inactivate the virus, suggesting that ozone could be an effective oxidant against COVID-19 virus. If incorrectly applied, ozone is toxic and contact with the respiratory tract must be avoided.</span>
Decontamination of N95 masks for re-use employing 7 widely available sterilization methods

Anand Kumar,Samantha B Kasloff,Anders Leung,Todd Cutts,James E Strong,Kevin Hills,Frank X Gu,Paul Chen,Gloria Vazquez-Grande,Barret Rush,Sylvain Lother,Kimberly Malo,Ryan Zarychanski,Jay Krishnan

DOI: https://doi.org/10.1371/journal.pone.0243965

IF: 3.7

2020-12-16

PLoS ONE

Abstract:The response to the COVID-19 epidemic is generating severe shortages of personal protective equipment around the world. In particular, the supply of N95 respirator masks has become severely depleted, with supplies having to be rationed and health care workers having to use masks for prolonged periods in many countries. We sought to test the ability of 7 different decontamination methods: autoclave treatment, ethylene oxide gassing (ETO), low temperature hydrogen peroxide gas plasma (LT-HPGP) treatment, vaporous hydrogen peroxide (VHP) exposure, peracetic acid dry fogging (PAF), ultraviolet C irradiation (UVCI) and moist heat (MH) treatment to decontaminate a variety of different N95 masks following experimental contamination with SARS-CoV-2 or vesicular stomatitis virus as a surrogate. In addition, we sought to determine whether masks would tolerate repeated cycles of decontamination while maintaining structural and functional integrity. All methods except for UVCI were effective in total elimination of viable virus from treated masks. We found that all respirator masks tolerated at least one cycle of all treatment modalities without structural or functional deterioration as assessed by fit testing; filtration efficiency testing results were mostly similar except that a single cycle of LT-HPGP was associated with failures in 3 of 6 masks assessed. VHP, PAF, UVCI, and MH were associated with preserved mask integrity to a minimum of 10 cycles by both fit and filtration testing. A similar result was shown with ethylene oxide gassing to the maximum 3 cycles tested. Pleated, layered non-woven fabric N95 masks retained integrity in fit testing for at least 10 cycles of autoclaving but the molded N95 masks failed after 1 cycle; filtration testing however was intact to 5 cycles for all masks. The successful application of autoclaving for layered, pleated masks may be of particular use to institutions globally due to the virtually universal accessibility of autoclaves in health care settings. Given the ability to modify widely available heating cabinets on hospital wards in well-resourced settings, the application of moist heat may allow local processing of N95 masks.
The Application of Ozone Gas in Inactivation of Surface and Airborne SARS-CoV-2 in Hospitals: A Systematic Review

Vida Past,Maziar Naderi,Golbarg Saremi,Paniz Azizi,Mahla Javadzadeh,Shiva Shahveh,Pegah Hosseini,Sima Sokhanvaran,Shaghayegh Shahveh,Shadi Moghimi,Sara Hedeshi,Azadeh Jalalpour,Zeynab Bayat

DOI: https://doi.org/10.1080/01919512.2024.2360438

2024-06-13

Ozone Science and Engineering

Abstract:The outbreak of COVID-19 caused by the novel coronavirus SARS-CoV-2 is a global public health threat. As high-risk environments for transmission, hospitals require effective methods to inactivate the virus on surfaces and in the air to prevent further spread among hospitals. The aim of this systematic review was to evaluate the use of ozone gas to inactivate surface and airborne SARS-CoV-2 in hospital settings. A systematic literature search was performed in databases including PubMed, Scopus and Web of Science from 2019 to 2024. Studies that assessed the use of ozone gas to inactivate SARS-CoV-2 in hospital settings were included. The quality assessment of the studies was done using the Critical Appraisal Skills Program (CASP) tool. A total of 10 studies met the inclusion criteria and were included in the review. Studies have reported that ozone effectively inactivates SARS-CoV-2 on surfaces and air in hospital environments. However, there were variations in ozone concentration, exposure time, and relative humidity (RH) used in each study. Ozone demonstrates promise as an effective disinfectant for inactivating SARS-CoV-2 on surfaces and air in hospital environments. It should be focused on determining the optimal conditions for maximum efficiency and establishing relevant protocols in terms of human health.

environmental sciences,engineering, environmental

Normal sinus heart rate redefined.

Ozone Gas: Scientific Justification and Practical Guidelines for Improvised Disinfection using Consumer-Grade Ozone Generators and Plastic Storage Boxes.

Efficient Facemask Sterilization via Forced Ozone Convection

Ozone treatment effectively eliminates SARS-CoV-2 from infected face masks.

Growth and development in patients with untreated clefts.

Inactivation of Multiple Human Pathogens by Fathhome's Dry Sanitizer Device: Rapid and Eco-Friendly Ozone-Based Disinfection

Ozone efficacy for the control of airborne viruses: Bacteriophage and norovirus models

Safe and Effective Use of Ozone as Air and Surface Disinfectant in the Conjuncture of Covid-19

Effects of metformin treatment on serum levels of C-reactive protein and interleukin-6 in women with polycystic ovary syndrome: a meta-analysis

Ozone as a disinfectant in laboratory surfaces against the SARS-cov-2 coronavirus

Effectiveness of Ultraviolet-C Light and a High-Level Disinfection Cabinet for Decontamination of N95 Respirators

N95 reprocessing by low temperature sterilization with 59% vaporized hydrogen peroxide during the 2020 COVID-19 pandemic

Ozone Decontamination of Medical and Nonmedical Devices: An Assessment of Design and Implementation Considerations

Design and Fabrication of Portable PPE Kit Sterilization

Disinfection of Respirators with Ultraviolet Radiation

Production of Singlet Oxygen from Photosensitizer Erythrosine for Facile Inactivation of Coronavirus on Mask

Development of a highly effective low-cost vaporized hydrogen peroxide-based method for disinfection of personal protective equipment for their selective reuse during pandemics

Disinfection effect of pulsed xenon ultraviolet irradiation on SARS-CoV-2 and implications for environmental risk of COVID-19 transmission

Ozone: A Potential Oxidant for COVID-19 Virus (SARS-CoV-2)

Decontamination of N95 masks for re-use employing 7 widely available sterilization methods

The Application of Ozone Gas in Inactivation of Surface and Airborne SARS-CoV-2 in Hospitals: A Systematic Review