Abstract:Both strengthening effects of gradient nanostructure (especially the gradient nanotwins) and nanoprecipitates have been well-recognized to simultaneously improve the mechanical properties of metallic materials, e.g., the high strength–ductility synergy. In this study, a surface mechanical attrition treatment technique has been applied to fabricate a gradient nanostructured bronze alloy (Cu-12Sn-1.5Ni-0.6Fe) with pre-nanoprecipitates. Atomic-scale investigations were performed to capture the microstructural evolution governing the gradient refinement process along the depth direction of the treated alloy. On one hand, the body-centered cubic (bcc) Fe-rich pre-nanoprecipitates are found to be well-retained in the fabricated gradient nanostructured specimen. On the other hand, it is interesting to reveal that the semi-coherent interfacial zones between the bcc Fe-based nanoprecipitates and face-centered cubic (fcc) Cu matrix with the specific distribution of misfit dislocations could facilitate the nucleation and growth of gradient nanotwins along the depth direction. Specifically, the twinning partials could be associated with the dissociations of the misfit dislocations in the semi-coherent interfacial region, which is evidenced by the concomitant fcc-Cu/bcc-Fe/nanotwin triplex. As a result, the synergetic strengthening effects of gradient nanotwins and nanoprecipitates are combined to enhance the strength–ductility synergy and work hardening capacity. Moreover, in situ transmission electron microscope observations were conducted to understand the synergetic strengthening mechanisms of the gradient nanotwins and nanoprecipitates during the dynamic cracking process in the fabricated gradient nanostructured bronze alloy. The strategy of combining the nanoprecipitates and gradient nanostructure synergetic effects in our work might offer a novel pathway for designing high-performance metallic materials.

Extra-ductile and strong tin bronze alloy via high-density intragranular ultra-nano precipitation with minimal lattice misfit

Accelerating Discontinuous Precipitation to Increase Strength by Pre-Deformation in Cu-Ni-Si Alloys

Nanoprecipitates Induced Dislocation Pinning and Multiplication Strategy for Designing High Strength, Plasticity and Conductivity Cu Alloys

Achieving high strength and large ductility in a Cr30Co30Ni30Al5Ti5 alloy through intergranular precipitation

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites

Achieving high strength and high conductivity synergy through hierarchical precipitation stimulated structural heterogeneities in a Cu-Ag-Zr alloy

Simultaneously enhancing the strength and electrical conductivity of Cu-Ni-Sn alloy through plastic deformation of an intermetallic compound

Making a low-cost duplex titanium alloy ultra-strong and ductile via interstitial solutes

Combining synergetic effects of gradient nanotwins and nanoprecipitates in heterogeneous bronze alloy

Increasing strength and conductivity of Cu alloy through abnormal plastic deformation of an intermetallic compound

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation

Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries.

Synergistic grain boundary engineering for achieving strength-ductility balance in ultrafine-grained high-Cr-bearing multicomponent alloys

Additively Manufactured Copper Alloy with Heterogeneous Nanoprecipitates-Dislocation Architecture for Superior Strength-Ductility-Conductivity Synergy

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Enhancing the strength-ductility trade-off in a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra fine precipitates, stacking faults, dislocation locks and twins

Enhanced strength-ductility synergy in an ultra-strong copper alloy via coherent nanoprecipitates and stress-induced twinning

Design of ultra-strong but ductile iron-based alloys with low supersaturations

Microstructures and mechanical properties of Cu–Ti alloys with ultrahigh strength and high ductility by thermo-mechanical treatment

Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates

Novel method to achieve synergetic strength–ductility improvement of Al–Cu alloy by in situ TiC–TiB2 particles via direct reaction synthesis