Abstract:Selective laser melting is able to produce complicated functional components. However, it may not simultaneously fulfill the diverse requirements of different parts of a component using uniform process parameters. Gradient processing based on the process parameters is proposed to realize the localized property design. An industrial valve body in a typical hydraulic valve was presented as a case study to demonstrate this concept. Lightweight design was first executed. Then, an experimental study was performed to investigate the influence of the laser power and exposure time on several properties, including the density, hardness, tensile strength, and tribological performance. Based on the specific property requirements of the shell, the fluid passages, and the contact surfaces of the valve body and electrical energy savings of the SLM process, three sets of process parameters were then selected to correspondingly fabricate different parts of the valve body. Results showed that the optimized valve body satisfied the relative density requirement of the shell as well as the yield strength and hardness requirements of the fluid passage. Moreover, compared with a solid valve body fabricated using a single set of default process parameters, the gradient processing leads to reductions from 3.5% to 51.8% in coefficients of friction in different working conditions, and a 4.8% reduction in the electric energy consumption. The lightweight design also contributes to a 21.8% reduction in the weight and a 22.9% reduction in the electric energy consumption. The optimized hydraulic valve also had functional characteristics that were comparable with those for the corresponding conventionally processed valve. This gradient processing was supported by design for property, a valuable technique for integrated design and manufacturing of functional gradient components.

A novel method of hydraulic valves design for additive manufacturing based on structural decomposition

Structural optimization of hydraulic valve block based on generative design and selective laser melting process simulation

Structure Optimization for Passages in Hydraulic Manifolds Using Metal Additive Manufacturing Technology

A Practical Redesign Method for Functional Additive Manufacturing

Optimization Design of Hydraulic Manifold Based on Additive Manufacturing

Model And Optimal Design Of Pneumatic High-Speed On/Off Valve

Localized Property Design and Gradient Processing of a Hydraulic Valve Body Using Selective Laser Melting

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Am-driven Design of Hydraulic Manifolds: Enhancing Fluid Flow and Reducing Weight

Planning of a Single Flow Channel in Valve Blocks Based on Additive Manufacturing and the Ant Colony Algorithm

Automated layout design of hydraulic components with constraints on flow channels

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

A novel design model of flow channel paths for additive manufacturing

Reliability Optimization Design Method of Integrated Valve Performance and Potential Failure

Structure Optimization of Conical Spool and Flow Force Compensation in a Diverged Flow Cartridge Proportional Valve

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

Optimization for the Forming Process Parameters of Thin-Walled Valve Shell

Automatic optimisation layout design approach for lightweight and energy-saving additive manufactured hydraulic manifolds

Computational Fluid Dynamics Analysis and Extended Adaptive Hybrid Functions Model-Based Design Optimization of an Explosion-Proof Safety Valve

Mathematical Modeling Study of Pressure Loss in the Flow Channels of Additive Manufacturing Aviation Hydraulic Valves

Design and Simulation of Hydraulic Integrated Valve based on SLM Technology