Abstract:Due to the requirements of the working environment, the marine axial flow control valve needs to reduce the noise as much as possible while ensuring the flow capacity to meet the requirements. To improve the noise reduction effect of the axial flow control valve, this paper proposes a Stacking integrated learning combined with particle swarm optimization (PSO) method to optimize a multi-stage step-down sleeve of the axial flow control valve. The liquid dynamic noise and flow value of the axial flow control valve are predicted by computational fluid dynamics. Based on the preliminary evaluation of its performance, the structural parameters of the multi-stage pressure-reducing sleeve are parameterized by three-dimensional modeling software. The range of design variables is constrained to form the design space, and the design space is sampled by the optimal Latin hypercube method to form the sample space. An automated solution platform is built to solve noise and flow values under different structural parameters. The Stacking method is used to fuse the three base learners of decision tree regression, Kriging, and support vector regression to obtain a structural optimization fusion model with better prediction accuracy, and the accuracy of the fusion model is evaluated by three different error metrics of coefficient of determination ( R 2 ), Root Mean Squared Error, and Mean Absolute Error. Then the PSO particle swarm optimization algorithm is used to optimize the fusion model to obtain the optimal structural parameter combination. The optimized multi-stage depressurization structure parameters are as follows: hole diameter t 1 = 3.8 mm, hole spacing t 2 = 1 mm, hole drawing angle t 3 = 6.4°, hole depth t 4 = 3.4 mm, and two-layer throttling sleeve spacing t 5 = 4 mm. The results show that the peak sound pressure level of the noise before and after optimization is 91.32 dB(A) and 78.2 dB(A), respectively, which is about 14.4% lower than that before optimization. The optimized flow characteristic curve still maintains the percentage flow characteristic and meets the requirement of flow capacity K v ≥ 60 at the maximum opening. The optimization method provides a reference for the structural optimization of the axial flow control valve.

Structural optimization of hydraulic valve block based on generative design and selective laser melting process simulation

Structure Optimization for Passages in Hydraulic Manifolds Using Metal Additive Manufacturing Technology

Localized Property Design and Gradient Processing of a Hydraulic Valve Body Using Selective Laser Melting

A novel method of hydraulic valves design for additive manufacturing based on structural decomposition

Optimization of Valve Body Process Based on HZCAE

Am-driven Design of Hydraulic Manifolds: Enhancing Fluid Flow and Reducing Weight

Model And Optimal Design Of Pneumatic High-Speed On/Off Valve

Planning of a Single Flow Channel in Valve Blocks Based on Additive Manufacturing and the Ant Colony Algorithm

Design and Simulation of Hydraulic Integrated Valve based on SLM Technology

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Optimization Design of Hydraulic Manifold Based on Additive Manufacturing

Structural optimization of multistage depressurization sleeve of axial flow control valve based on Stacking integrated learning

Study on the Key Techniques of Designing Optimization and Manufacturing of Functional Part's Structure Based on Selective Laser Melting Technology

Low-carbon design of structural components by integrating material and structural optimization

Collaborative optimization design of process parameter and structural topology for laser additive manufacturing

Design and Simulation of an Innovative Cylinder Fabricated by Selective Laser Melting

Flow resistance optimization of link lever butterfly valve based on combined surrogate model

Optimization of Valve Block Shape Using CFD

Design and optimization of hydraulic slide valve spool structure based on steady state flow force

Optimization of Valve Disc Using Orthogonal Array and Kriging Model

Automated layout design of hydraulic components with constraints on flow channels