Abstract:Selective laser melting is able to produce complicated functional components. However, it may not simultaneously fulfill the diverse requirements of different parts of a component using uniform process parameters. Gradient processing based on the process parameters is proposed to realize the localized property design. An industrial valve body in a typical hydraulic valve was presented as a case study to demonstrate this concept. Lightweight design was first executed. Then, an experimental study was performed to investigate the influence of the laser power and exposure time on several properties, including the density, hardness, tensile strength, and tribological performance. Based on the specific property requirements of the shell, the fluid passages, and the contact surfaces of the valve body and electrical energy savings of the SLM process, three sets of process parameters were then selected to correspondingly fabricate different parts of the valve body. Results showed that the optimized valve body satisfied the relative density requirement of the shell as well as the yield strength and hardness requirements of the fluid passage. Moreover, compared with a solid valve body fabricated using a single set of default process parameters, the gradient processing leads to reductions from 3.5% to 51.8% in coefficients of friction in different working conditions, and a 4.8% reduction in the electric energy consumption. The lightweight design also contributes to a 21.8% reduction in the weight and a 22.9% reduction in the electric energy consumption. The optimized hydraulic valve also had functional characteristics that were comparable with those for the corresponding conventionally processed valve. This gradient processing was supported by design for property, a valuable technique for integrated design and manufacturing of functional gradient components.

Optimization of a butterfly valve disc using 3D topology and genetic algorithms

Multi-objective global optimization of a butterfly valve using genetic algorithms

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Optimum design of piloted large flow and high speed onoff valve

Multi-objective optimization of a triple-eccentric butterfly valve considering structural safety and sealing performance

Cavitation optimization of a throttle orifice plate based on three-dimensional genetic algorithm and topology optimization

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Flow resistance optimization of link lever butterfly valve based on combined surrogate model

Computational design optimization of industrial single piece ball valve to enhance the flow performance

Localized Property Design and Gradient Processing of a Hydraulic Valve Body Using Selective Laser Melting

Bi-objective Topology Optimization of Asymmetrical Fixed-Geometry Microvalve for Non-Newtonian Flow

Structural optimization of hydraulic valve block based on generative design and selective laser melting process simulation

A Novel Check Microvalve Designed for Non-Newtonian Fluids by Applying an Optimization Algorithm

Numerical simulation and experimental research of a new butterfly valve

Optimization on the Topological Coupling-Throttling Structures for Directional Valves

CFD Analysis on the Dynamic Flow Characteristics of the Pilot-Control Globe Valve

Optimization for the Forming Process Parameters of Thin-Walled Valve Shell

Research on the Optimal Design of a Pilot Valve Controlling Cut-Off Valve

Structure Optimization of Conical Spool and Flow Force Compensation in a Diverged Flow Cartridge Proportional Valve

Optimization of Valve Block Shape Using CFD

OPTIMAL DESIGN OF NEW TYPE ENERGY-SAVING SOLENOID DIRECTIONAL CONTROL VALVE USING GENETIC ALGORITHM