Abstract:With the development of the society and the times, traditional parametric design methods are witnessing a severe challenge due to the more and more complex physical systems. Thus, developing novel parametric analysis methods is very important for dealing with complex physical systems, refining useful parameters from numerous data, and proposing accurate prediction formulas. A spring slider system, a direct-current circuit system, a pipeline pressure drop system and a steady heat transfer model of flat plate system were described from the point of systemic parametric analysis method. Then, the key physical parameters in above four systems were summarized. Based on the comparative results, a novel systemic parametric design method, obstacle contained system (OCS) design method, was proposed. The OCS was made up of three elements: an obstacle element, a pass body element and a D-value element. With an abundant accurate data pole, the OCS design method could build the direct relationship of the obstacle element and the D-value element, which meant the simplification of the physical models and much easier to get relatively accurate results. Meanwhile, the design of pilot-control globe valve orifice was checked with both the OCS design method and the numerical simulation. The diameter of orifice on the valve core could influence the pressure difference and the maximum vapor rate inside pilot-control globe valves. Achieved by two different methods, the OCS design method and the numerical simulation, the results showed that the effects of orifice diameters on the pressure difference and the maximum vapor rate under different inlet velocities, were within 2% errors, which was reasonable and acceptable for the engineering application. In other words, the OCS design method was credible for parametric analysis. In future, the OCS design method has a broad application prospect to analyze various types of physical models especially in the era of big data.

Computational Fluid Dynamics Analysis and Extended Adaptive Hybrid Functions Model-Based Design Optimization of an Explosion-Proof Safety Valve

The CFD Analysis of Cavitation Erosion and Structural Optimization for an Unloading Valve

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Model And Optimal Design Of Pneumatic High-Speed On/Off Valve

Sealing Optimization of a Nuclear Spring-Loaded Safety Valve Based on the E-AHF Ensemble Surrogate Model

Flow resistance optimization of link lever butterfly valve based on combined surrogate model

Structure Optimization of Conical Spool and Flow Force Compensation in a Diverged Flow Cartridge Proportional Valve

Numerical Simulation on Fluid Dynamic Behavior of High-pressure Safety Valves

Dynamic Characteristics Analysis on High Parameter Steam Spring-Loaded Safety Valve

Research on the Optimal Design of a Pilot Valve Controlling Cut-Off Valve

Numerical and Experimental Analysis of Fluid Force for Nuclear Valve

Evaluation of the Viscous Heating Induced Jam Fault of Valve Spool by Fluid–structure Coupled Simulations

AN OPTIMIZATION STUDY ON CAVITATION FLOW IN A STEAM TRAP VALVE

Fluid–structure coupling modelling and parameter optimization of a direct-acting relief valve for underwater application

Obstacle Contained System (OCS) Design Method and Its Application in Valve Core Orifice Design of Pilot-Control Globe Valve

Numerical Simulation and Optimization of Internal Flow Field in the High Pressure Coal Conveying Pump Based on the Dynamic Mesh

Numerical and Experimental Investigation on Opening Direction Steady Axial Flow Force Compensation of Converged Flow Cartridge Proportional Valve

Optimization of Valve Block Shape Using CFD

Simulation and Optimal Design of High-Pressure-Differential and High-Solid-Phase Relief Valves

Numerical Analysis about the Dynamic Properties of a Pressure Relief Valve and Improvement Measures

Optimization of Nonlinear Pressure-Flow Characteristics of a Spring-Loaded Pressure Relief Valve Based on Computational Fluid Dynamics Simulation