Abstract:Obtaining the best operating parameters of the internal combustion engine has focused the attention of designers and researchers since the first years of its creation. Initial research focused on increasing engine power and overall efficiency. As time passed, these aspirations became more sophisticated and began to concern other operating parameters of the drive unit. The basic problem, however, remained the improvement of filling the cylinder with the working medium. Turbocharger charging consists in using the energy of the exhaust gases to drive a turbine placed on a common shaft with a compressor supplying air under increased pressure to the cylinders. Over time, the turbocharger became one of the key elements and its technical condition began to play a key role in the operation and performance of modern drive units. Like every element, the turbocharger itself is not without its faults. This procedure is known among manufacturers who, when designing power units and their assemblies, pay special attention to the essence of turbocharger construction. Since it is impossible to predict all the phenomena accompanying a working turbocharger at the design stage, the authors of this paper conducted bench tests of a selected batch of turbochargers, focusing mainly on the vibration measurements of the turbocharger rotating assembly. At the same time, we present a dynamic model of the mentioned system based on the analyses resulting from the solutions of the equations of a numerical model. In order to give the research a practical aspect, the results of the theoretical research were compared with the results of bench tests. It has been shown that the basic problem is to guarantee the correct operating parameters of the bearings in the position of static and dynamic equilibrium. Obtaining such operating parameters requires finding a compromise solution, e.g., between the maximum temperature in oil films and the amplitudes of vibration accelerations in bearing nodes. The research results presented in the article can be used as a field for further discussion in the field of research on the reliability of turbochargers and be helpful in the design process in order to avoid design errors and reduce production costs.

Dynamics Analysis of the Triangular Rotary Engine Structures

Performance Analysis of the Cylinder Gas Film Seal between Dual-Rotor Reverse Shafts Considering Lubrication and Centrifugal Expansion Effects

Dynamic Analysis of Trochoidal-Type Machine

General dynamic model of aeroengine's rotor system during maneuvering flight

Analyse Rotor Dynamics of Agitating Shaft with the Finite Element Method

Vibration Characteristics of Aeroengine's Rotor System During Maneuvering Flight

Dynamic Model and Numerical Simulation for Synchronal Rotary Compressor

Dynamic Analysis of Rotor'S Radial Rub-Impact in Full Degrees of Freedom Accounting for Turborotor'S Non-Linear Clearance-Excitation Force

Study on the Semi-numerical and Semi-analytical Solutions of the Dynamics Equation of an Aero-engine Rotor System with ERSFD

Nonlinear Dynamical Behaviors of a Complicated Dual-Rotor Aero-Engine with Rub-Impact

Study on the Three-Dimensional Tribo-Dynamic Analysis of Piston Ring Pack Considering the Influence of Piston Secondary Motion

The formation mechanisms of flow field in a compound intake ported rotary engine considering apex seal leakage

Optimal Design for New Rotary Engine with Geometric Shape Functions on Combustion Chamber and Ports

Dynamical Analysis On Circumferential Rod Fastening Rotor System In Heavy-Duty Gas Turbine

Dynamic Analysis of Three-Rotor System with Hollow Shaft under Clutch Misalignment

Multistage Rotational Optimization Using Unified Jacobian–Torsor Model in Aero-Engine Assembly

Evaluation of Selected Dynamic Parameters of Rotating Turbocharger Units Based on Comparative Model and Bench Tests

Dynamic Analysis of Composite Stator of Ultrasonic Motor Based on Substructure Interface Loading Theory

Dynamic characteristics analysis of a dual-rotor system with inter-shaft bearing

Tribo-dynamic Modeling Method and Application to Three-Dimensional Flexible PRL System

AN EFFICIENT CRANKSHAFT DYNAMIC ANALYSIS USING SUBSTRUCTURING WITH RITZ VECTORS