Abstract:Oxidation resistance of titanium aluminide (TiAl) based alloys is a fundamental aspect for the high-temperature structural applications such as in the advanced hypersonic aircraft engines and gas turbines. The aim of this study was to identify oxidation kinetics and mechanisms through detailed microstructural characterization of a newly-developed Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y alloy via focused ion beam (FIB), transmission electron microscopy (TEM), X-ray diffraction (XRD), electron probe microanalysis (EPMA), scanning transmission electron microscopy (STEM), along with density functional theory (DFT) calculations. The alloy consisting mainly of γ-TiAl/α2-Ti3Al lamellar structure exhibited a superior oxidation resistance at 700 °C, and followed parabolic oxidation kinetics at 800 °C and 900 °C. The observed multi-layered scale structure consisted of TiO2, Al2O3-rich, Al2O3+TiO2, H-Ti2AlN+Al2O3+α2-Ti3Al, Z-Ti5Al3O2+AlNb2+Laves-(Ti,Nb)Cr2, and H-Ti2AlN/α2-Ti3Al lamellae from the outside to inside after high-temperature oxidation. The γ-TiAl/α2-Ti3Al lamellae near the scale/substrate interface were first transformed into H-Ti2AlN/α2-Ti3Al lamellae, with orientation relationships identified as ( 0001 ) α 2 / / ( 0001 ) T i 2 A l N , ( 10 1 ¯ 0 ) α 2 / / ( 10 1 ¯ 0 ) T i 2 A l N and [ 1 2 ¯ 10 ] α 2 / / [ 1 2 ¯ 10 ] T i 2 A l N . The H-Ti2AlN/α2-Ti3Al lamellae were then transformed into a metastable Z-Ti5Al3O2 phase at the scale/substrate interface. The Z-phase was decomposed to Ti3Al and Al2O3 as the scale/substrate interface moved inwardly. Ti3Al reacted further with oxygen and nitrogen to form Ti2AlN, which was finally oxidized to form TiO2 and α-Al2O3. A Nb-rich layer was present beneath the scale along with the formation of AlNb2 and Laves phase, and the doping effect of Nb to suppress the diffusion of oxygen occurred mainly in the TiO2+Al2O3 compound layer. The results obtained in this study would pave the way for the development of advanced oxidation-resistant TiAl-based materials for high-temperature applications.

Oxidation and hot corrosion behaviors of NiAlTa protective material for turbine single crystal blade tips

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Structural design and high temperature tribological behavior of a new turbine blade tip protective coating

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

High-Temperature Hot Corrosion Resistance of CrAl/NiCoCrAlY/AlSiY Gradient Composite Coating on TiAl Alloy

Research Progress on High-Temperature Oxidation and Corrosion Mechanisms of Aluminide Coatings

Microstructural evolution and elemental interdiffusion behaviour near the interface of NiAlTa alloy and single crystal superalloy DD5 at 1000 °C, 1050 °C, and 1100 °C

Investigation on the Oxidation Behavior of the NiCrAlY Bond-Coat with Low Al Content Sprayed by High Velocity Oxygen Fuel Method

Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy

Effect of aluminum addition on microstructure, mechanical properties and high temperature tribological properties of nickel-rich NiTi alloy

Effect of different alloyed layers on the high temperature oxidation behavior of newly developed Ti2AlNb-based alloys

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

Recent progress in high temperature TiAl alloys

Role of nitrogen and tantalum in the high-temperature oxidation behavior of AlCoCr 0.5 NiTa x Ti(N) alloys synthesized by laser in situ synthesis

Thermodynamic and microstructural study of Ti2AlNb oxides at 800 °C

Time-Resolved In-Situ Xrd Study on Oxidation Evolution of Ti2alnb-Based Alloys

Early oxidation behavior of Ti50Al and Ti45Al8Nb alloys

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Research Progress on Aluminized Coatings for High Temperature Blades

Epitaxial growth and oxidation behavior of the NiCoCrAlYTa/Y2O3 coating on a nickel-based single-crystal superalloy blade tips, produced by electro spark deposition

900 °C oxidation resistance of Ni-base superalloys alloyed with different refractory elements