Abstract:In contrast to fossil fuel or nuclear energy based electrical power intermittent renewable energy such as solar and wind need to balance the mismatch of energy supply and demand to allow stable and secure grid operation requiring energy storage technologies. A promising device is the solid oxide electrochemical cell (SOC) which can be operated reversibly, i.e. an SOC can act as an electrolyser to store electricity in the form of hydrogen and it can act as a fuel cell to produce electricity, water and heat. With this technology a single stack can be integrated into one system to address different markets such as hydrogen production, power-to-gas, energy storage and distributed power generation. When electrolyzing both steam and CO2 in co-electrolysis operating mode, synthesis gas can be produced to be converted by further downstream catalytic processes into fuels such as methane, gasoline or diesel. Due to the high operating temperature of 750-900 °C and the possibility to re-use waste heat from industrial processes very high electrical efficiency can be achieved. However, maintaining the performance during long-term operation represents still a major challenge. Solid oxide cells and stacks are characterized and tested at DLR regarding electrochemical performance and degradation for both reversible and co-electrolysis operation. In cooperation with a car manufacturer (AUDI AG, Germany) and a stack supplier (Sunfire GmbH, Germany) DLR works on the investigation of SOC stacks during near-system operating conditions in electrolysis as well as reversible operating mode. The electrochemical performance is monitored during long-term tests to be compared with identical stacks implemented in an industrial reversible SOC (RSOC) system in order to determine and better understand degradation processes occurring in different operating modes. The concept of the power-to-gas facility with 300 kW power and first results of stack tests are presented. DLR also works on the evaluation of solid oxide cells for co-electrolysis of CO2 and H2O aiming at the production of synthetic fuels. Cell behaviour and durability are assessed under various operating conditions. Results will be reported and discussed and remaining challenges for maturing the technology are addressed.

Integration of reversible solid oxide cells with methane synthesis (ReSOC-MS) in grid stabilization: A dynamic investigation

Dynamic Simulation of a Reversible Solid Oxide Cell System for Efficient H2 Production and Power Generation

Dynamic-cycle Simulation of Power-to-methanol-to-power System with Reversible Solid Oxide Cells: Multi-physics and Techno-Economic Analysis

Thermal Management of Reversible Solid Oxide Cells in the Dynamic Mode Switching

Multi-objective Optimizations of Solid Oxide Co-Electrolysis with Intermittent Renewable Power Supply Via Multi-Physics Simulation and Deep Learning Strategy

Power-to-Gas Energy Storage by Reversible Solid Oxide Cell for Distributed Renewable Power Systems

Optimization of Electric-Gas Integrated Energy System Based on Reversible Solid Oxide Cell Considering Gas Composition

Integration of Oxycombustion and Microbial Electrosynthesis for Sustainable Energy Storage

Reversible Solid Oxide Cell and Co-Electrolysis Operation for Power-to-Gas and Energy Storage Application

Synchronous Enhancement of H2O/CO2 Co-Electrolysis and Methanation for Efficient One-Step Power-to-methane

Optimal heat and power management of a reversible solid oxide cell based microgrid for effective technoeconomic hydrogen consumption and storage

Energy Storage and Syngas Production by Switching Cathode Gas in Nickel-Yttria Stabilized Zirconia Supported Solid Oxide Cell

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Innovative Technology for Large-Scale Photovoltaic Consumption Using Reversible Solid Oxide Cells

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Co‐Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells

Development of a Novel Energy System Based on Reversible Solid Oxide Cells and Power to Gas Technology for the Urban Energy Conversion and Storage

Development and Modelling of a Novel Electricity-Hydrogen Energy System Based on Reversible Solid Oxide Cells and Power to Gas Technology

Pressurized Tubular Solid Oxide H2O/CO2 Coelectrolysis Cell for Direct Power‐to‐methane

Syngas/power Cogeneration from Proton Conducting Solid Oxide Fuel Cells Assisted by Dry Methane Reforming: A Thermal-Electrochemical Modelling Study

Feasibility evaluation of a wind/P2G/SOFC/GT multi-energy microgrid system with synthetic fuel based on C-H-O elemental ternary analysis