Abstract:In this article, a low-energy chirp-pulsed radar thermography (CP-RT) is used to detect the subsurface delamination of carbon fiber reinforced polymer (CFRP) composite as nondestructive testing and evaluation (NDT&E) techniques. The CFRP specimen with artificial flat-bottom holes (FBHs) is prepared for NDTandE by chirp-pulsed radar thermography. Two lasers are employed to be external excitation heat sources. The laser intensities are modulated according to a chirp-pulsed radar signal that combines linear frequency modulation and pulse excitation, and the temperature rise is controlled within 2 °C in the experiment. The thermal-wave response signal is processed by a series of different postprocessing characteristic extraction algorithms. These algorithms include time–frequency algorithms [crosscorrelation algorithm (CC), fast Fourier transform (FFT), and dual-orthogonal demodulation algorithm (DOD)] and statistical analysis approaches [principal component analysis (PCA) and PCA-based reconstructed independent component analysis (PCA-RICA)]. The signal-to-noise ratio (SNR) of defects is employed to evaluate the defect detectability for different size defects by different postprocessing algorithms. A three-dimensional (3-D) tomography method based on the FFT phase characteristic is proposed. A truncated-correlation photothermal tomography based on DOD is also introduced to enable the 3-D tomography of CFRP specimen. The FFT phase presents a relatively high SNR and has good correlation with the depth of the defect. The FFT-based CP-RT has the potential to provide a rapid NDT&E and 3-D tomography approach for CFRP with subsurface defects under the low-energy excitation condition.

Defect imaging in carbon fiber composites by acoustic shearography

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

Research on Internal Defect Detection of Epoxy Glass Fiber Composites Based on Terahertz Imaging Technology

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Defects detection in CFRP reinforced concrete structures by digital shearography

Inspection of defects in composite structures using long pulse thermography and shearography

In-situ real-time imaging of subsurface damage evolution in carbon fiber composites with shearography

Defect Detection Method for CFRP Based on Line Laser Thermography

Ultrasonic Phased Array Imaging Approach Using Omni-Directional Velocity Correction for Quantitative Evaluation of Delamination in Composite Structure

High Precision Detection Method for Delamination Defects in Carbon Fiber Composite Laminates Based on Ultrasonic Technique and Signal Correlation Algorithm

Visualized characterization of diversified defects in thick aerospace composites using ultrasonic B-scan

The Feature Recognition of CFRP Subsurface Defects Using Low-Energy Chirp-Pulsed Radar Thermography

A time-of-flight based weighted imaging method for carbon fiber reinforced plastics crack detection using ultrasound guided waves

Defect Detection and Imaging in Composite Structures Using Magnetostrictive Patch Transducers

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Application of pulse acoustic microscopy technique for 3D imaging bulk microstructure of carbon fiber-reinforced composites

Ultrasonic imaging of delamination in thick CFRP laminates using an energy-compensation reverse time migration method

Adaptive ultrasonic full-matrix imaging of internal defects in CFRP laminates with arbitrary stacking sequences

Non-contact detection of the interfacial microdefects in metal/CFRP hybrid composites using air-coupled laser ultrasound

Non-destructive testing and structural health monitoring technologies for carbon fiber reinforced polymers: a review