Abstract:In this article, a low-energy chirp-pulsed radar thermography (CP-RT) is used to detect the subsurface delamination of carbon fiber reinforced polymer (CFRP) composite as nondestructive testing and evaluation (NDT&E) techniques. The CFRP specimen with artificial flat-bottom holes (FBHs) is prepared for NDTandE by chirp-pulsed radar thermography. Two lasers are employed to be external excitation heat sources. The laser intensities are modulated according to a chirp-pulsed radar signal that combines linear frequency modulation and pulse excitation, and the temperature rise is controlled within 2 °C in the experiment. The thermal-wave response signal is processed by a series of different postprocessing characteristic extraction algorithms. These algorithms include time–frequency algorithms [crosscorrelation algorithm (CC), fast Fourier transform (FFT), and dual-orthogonal demodulation algorithm (DOD)] and statistical analysis approaches [principal component analysis (PCA) and PCA-based reconstructed independent component analysis (PCA-RICA)]. The signal-to-noise ratio (SNR) of defects is employed to evaluate the defect detectability for different size defects by different postprocessing algorithms. A three-dimensional (3-D) tomography method based on the FFT phase characteristic is proposed. A truncated-correlation photothermal tomography based on DOD is also introduced to enable the 3-D tomography of CFRP specimen. The FFT phase presents a relatively high SNR and has good correlation with the depth of the defect. The FFT-based CP-RT has the potential to provide a rapid NDT&E and 3-D tomography approach for CFRP with subsurface defects under the low-energy excitation condition.

Defects detection in CFRP reinforced concrete structures by digital shearography

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Defect imaging in carbon fiber composites by acoustic shearography

Defect Detection Method for CFRP Based on Line Laser Thermography

Detection of CFRP-concrete interfacial defects by using electrical measurement

Characterization and depth detection of internal delamination defects in CFRP based on line laser scanning infrared thermography

Defect size measurement and far distance infrared detection in CFRP-concrete and CFRP-steel systems

A novel damage detection method for carbon fibre reinforced polymer structures based on distributed strain measurements with fibre optical sensor

Non-destructive testing and structural health monitoring technologies for carbon fiber reinforced polymers: a review

Interfacial debonding detection of strengthened steel structures by using smart CFRP-FBG composites

Detection and quantification of corrosion defects in CFRP-strengthened steel structures based on low-power vibrothermography

Self-Sensing CFRP Fabric for Structural Strengthening and Damage Detection of Reinforced Concrete Structures

The Feature Recognition of CFRP Subsurface Defects Using Low-Energy Chirp-Pulsed Radar Thermography

Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP

A novel two-level approach to defect detection in braided CFRP using Air-coupled ultrasonic testing

Inspection of defects in composite structures using long pulse thermography and shearography

Computer-aided feature recognition of CFRP plates based on real-time strain fields reflected from FBG measured signals

Infrared-Induced Laser Shearography: Enhanced Multimodal Features Recognition for Interfacial Defects in SIR/GFRP Composite Structures