Abstract:Mechanical behaviour of twenty-eight longitudinal lap-welded joints made of high strength steels (HSS) under tension load was investigated by experimental and numerical study. Weaknesses due to traditional deformation measurements for fillet welded joints can be perfectly solved by digital image correlation techniques (DIC). Distribution and development of strain field throughout the specimens along the whole loading process were recorded by DIC measurement. The effect of parameters (e.g. weld size, weld length and mismatch ratio) on mechanical properties (e.g. ultimate strength, failure modes, weld ductility and fracture angle) of longitudinal fillet welds and transverse fillet welds, which was introduced in detail in previous work by the authors, were compared. Generally, because of the difference on the combination of shear force and tension force, the fracture angle of longitudinal welded specimens (around <math>50∘</math>) were much more divergent from transverse welded specimens (around <math>20∘</math>) even though both of them failed at welded zone (welded zone only refers to weld metal in this paper), resulting that the mean strength of longitudinal welded specimens were only 0.58 time of transverse welded specimens. Conversely, the mean deformation capacity of longitudinal welded specimens was almost 4.0 times of transverse welded specimens. All longitudinal welded specimens have "platform" or "decline" feature while all transverse welded specimens have "rise" or "platform" feature load-deformation curves. Generally, the specimens with "rise" feature load-deformation curve are more likely to suffer sudden fracture, while specimens with "decline" or "platform" feature have satisfactory ductility performance. Based on the strain distribution and development features provided by DIC measurement, a new strength criterion, in which the ultimate strain obtained in relevant coupon tests was an indicator, was proposed and through the comparison between the numerical results and test results, its validation was verified by FE simulation. Moreover, it was confirmed that the predicted loads of EC3 and AISC Specification were close and slightly conservative for all specimens.

Tensile analysis of loop joints with different overlap lengths

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Experimental study of the static behavior of tubular N-joints

Experimental and numerical analysis on flexural behavior of improved U-bar joint details for accelerated bridge construction

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Analysis on Mechanical Behavior of Welding-Overlap Splices for Mid-Diameter Steel Bars

Experimental and numerical studies of a new prefabricated steel frame joint without field-welding: Design and static performance

Experimental Research on Strengthening Transverse Connections of Prefabricated Concrete Hollow Core Slab Beam Bridges

Cracking simulation and analysis of the mortise-and-tenon wet joints in Precast reinforced concrete ribbed girder Bridges

Fatigue Tests and Failure Mechanism of Rib-to-Deck Welded Joints in Steel Bridge

Flexural performance of mortise–tenon wet joints in prefabricated ribbed beam bridges

Experimental Study on Tensile Behavior of Wet Joints in A Prefabricated Composite Deck System Composed of Orthotropic Steel Deck and Ultrathin Reactive-Powder Concrete Layer

Analysis of PC Continuous Box Girder Top and Bottom Overlap Tendon with Strut-and-tie Method

Study on in-plane double-crack propagation in the rib-to-deck welded toe of steel-bridge

Static Analysis for Weld-Bonded Single-Lap Shear Joint with Multiple Weldspots

Mechanical behaviour of longitudinal lap-welded joints of high strength steel: Experimental and numerical analysis

Experimental and numerical analyses on stress concentration factors of concrete-filled welded integral K-joints in steel truss bridges

Experiments on Hybrid Tubular K-joints with Circular Braces and Square Chord in Stainless Steel

Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns

Experiments on stainless steel hybrid K-joints with square braces and circular chord

Research on Application of Externally Prestressing for Simple-Continuous Bridge