Abstract:5 V-class LiNi0.5Mn1.5O4 (LNMO) cathode material is emerging as a promising cobalt-free alternative to meet the growing demand for affordable, high-performance lithium-ion batteries (LIBs). However, LNMO faces significant electrochemical challenges, particularly interfacial instability with commercial electrolytes due to its high operating potentials. This instability leads to the dissolution of transition metals and consequently electrode crosstalk, which severely deteriorates electrochemical performance. Surface coating is extensively investigated to reduce interfacial side reactions for enhanced cycling stability. Traditional methods typically require multiple steps, including dispersion, mixing, drying, and calcination, which can be time-consuming and complex. Additionally, the resulting ceramic coatings are often rigid and unevenly distributed due to lattice mismatches, potentially leading to poor interfacial contact and increased resistance. In this study, tetraethyl orthosilicate (TEOS) is proposed as a streamlined slurry additive to in situ form an ethoxy-functional polysiloxane (EPS) film on the surface of LNMO particles during electrode preparation. Post-mortem X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma (ICP) analyses reveal the crucial role of the EPS film in addressing interfacial instability issues. First, the EPS film serves as an artificial cathode-electrolyte interface (CEI) with a robust Si―O―Si bonding network, which is less vulnerable under high potentials. Second, the remaining ethoxy-functional groups in EPS scavenge HF by forming stable Si―F bonds, thereby suppressing the detrimental transition metal dissolution and crosstalk. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) further confirm the stability of the EPS film and the enhanced structural stability of the modified LNMO. Galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) results demonstrate that EPS reduces the overall impedance and improves ion diffusion kinetics by forming stable electrode-electrolyte interfaces. As a result, compared to the baseline, the optimized LNMO cathode exhibits significantly improved cycling stability in both half cells (84.6% vs. 51.4% capacity retention after 1000 cycles) and full cells when paired with commercial graphite anodes (83.3% vs. 53.4% retention after 500 cycles). This strategy, further validated under elevated temperatures of 50 °C and in pouch-type cells, is expected to pave the way for the development of next-generation high-performance LIBs.

Mitigating Crosstalk by Slurry Additive Toward 5 V Cobalt‐Free LiNi0.5Mn1.5O4 Cathode

Tailoring Electrode-Electrolyte Interfaces Via a Simple Slurry Additive for Stable High-Voltage Lithium-Ion Batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

A 5V-class Cobalt-free Battery Cathode with High Loading Enabled by Dry Coating

Stabilized Cathode Interphase for Enhancing Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4 -Based Lithium-Ion Battery via cis -1,2,3,6-Tetrahydrophthalic Anhydride

Modifying the Cathode–Electrolyte Interphase by Sulfone-Based Additive to Enhance the Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4

High-Energy-Density and Long-Lifetime Lithium-Ion Battery Enabled by a Stabilized Li2O2 Cathode Prelithiation Additive

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

Effect of Single-Walled Carbon Nanotube Sub-carbon Additives and Graphene Oxide Coating for Enhancing the 5 V LiNi 0.5 Mn 1.5 O 4 Cathode Material Performance in Lithium-Ion Batteries

Multifunctional Self-Reconstructive Cathode/Electrolyte Interphase Layer for Cobalt-Free Li-rich Layered Oxide Cathode

Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

Rational Molecular Design of Electrolyte Additive Endows Stable Cycling Performance of Cobalt-Free 5 V-class Lithium Metal Batteries

Improving the Interfacial Stability of Ultrahigh-Nickel Cathode with PEO-based Electrolyte by Targeted Chemical Reactions

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Rescue the cycle life of LiNi0.5Mn1.5O4 cathode on high voltage via glyceryl triacetate as the multifunction additive

The Electrochemical Performance Deterioration Mechanism of LiNi0.83Mn0.05Co0.12O2 in Aqueous Slurry and a Mitigation Strategy

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Residual Alkali-Evoked Cross-Linked Polymer Layer for Anti-Air-sensitivity LiNi0.89Co0.06Mn0.05O2 Cathode

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries