Abstract:The particle pollution caused by the stray light of the high-energy laser system irradiating the frame aluminum alloy is one of the most important reasons that hinder the stable operation of the system. Therefore, accurately revealing the mechanism of the interaction between the stray light and the aluminum alloy frame is an important and challenging task to ensure that inertial confinement fusion (ICF) system can generate clean and sustainable energy. In this paper, based on the secondary development of ABAQUS, a transient-stabilized thermal-mechanical direct coupling model is developed and experimentally investigated for the laser-material interaction in the high-energy nanosecond laser system with an energy density of 2 J/cm(2). The mechanical damage, thermal ablation, and especially the temperature dependence of the thermal optical parameters of the aluminum alloy are considered in the modeling. Through comparative analysis, the results indicate that the effect of the variable optical properties must be considered in order to accurately reveal the mechanism of intense laser irradiation. On this basis, we found that the pulsed intense laser is absorbed by the aluminum alloy with a smaller absorption rate, after the aluminum alloy surface reaches the melting point and liquefies. This means more laser is reflected to the laser system, reducing the stability and reliability of the system. The whole process includes thermal expansion, thermal melting and potential mechanical damage, while no vaporization ablation occurs. The simulation conclusions are verified by the characterization of the experimental specimens, and it is verified that the diameter of the melting area is close to the full width at half maximum (FWHM) of the Gaussian laser source. This study provides a more accurate numerical model for precisely revealing the mechanism of high-energy nanosecond laser irradiation on metallic materials, and thus promoting the sustainable and reliable generation of clean energy from inertial confinement fusion. (C) 2021 Elsevier B.V. All rights reserved.

Degradation of optical components induced by production on aluminum alloy surface irradiated by stray light

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Preparation and Laser Damage Mechanism of Stray-Light-absorbing Thin Films in High-Energy Laser Systems

Research on the Stray Light Protection Functional Film Characteristics: Laser Parameter Correlation with Irradiation Damage

Stray Light Analysis And Calculation Modeling Of Optical System

Damage Morphologies of Al2O3 and Fe Particles Attached on the Input Surface of Fused Silica after Irradiation by a 355 Nm Laser.

Verification and analysis of stray light in high-power laser system

Research on the mitigation of redeposition defects on the fused silica surface during wet etching process

Functional gradient films on aluminum alloy to improve its laser-induced damage ability and reduce pollutant particles' generation

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Evolution mechanism of subsurface damage during laser machining process of fused silica

Study of simulation and experimental on the damage of stray light absorbing function films induced by nanosecond laser

Surface roughness evolution mechanism of the optical aluminum 6061 alloy during low energy Ar+ ion beam sputtering

Laser-Induced Damage Initiation and Growth of Optical Materials

Study on the Interaction Between Nanosecond Laser and 6061 Aluminum Alloy Considering Temperature Dependence

Degradation behavior of deep UV-LEDs studied by electro-optical methods and transmission electron microscopy

The Characterization of Laser-Induced Particles Generated from Aluminum Alloy in High Power Laser Facility

Stray light reduction of silicon particle reinforced aluminum for optical systems

Investigation of the Multimechanism Laser Cleaning Dynamics for Rough Fused Silica Surfaces with Organic Contaminants: A Computational Simulation and Atomic Analysis.

Examining Degradation Mechanisms in Strain-Relaxed AlGaN-Based UV-C Light-Emitting Diodes Using Raman Spectroscopy

Mechanisms of the Sharp Decrease of the LIDT from the Plastic Surface Defect to the Brittle Surface Defect on Optical Surface