Abstract:Inter-calibration is a general method to harmonize the in-orbit spectral radiance of the target instrument with the reference instrument in the visible and infrared spectra. This study proposes and applies an inter-calibration method to the space-based Ultraviolet and visible spectra (UVIS) grating radiometers. Based on pixel pairs derived from simultaneous nadir overpasses (SNO), the in-orbit spectral radiances from the environmental trace gas monitoring instrument onboard the Chinese high-resolution remote sensing satellite GaoFen-5 (EMI/GF-5) and the TROPOspheric Monitoring Instrument onboard the Sentinel-5 Precursor satellite (TROPOMI/S5p) are compared through the double difference (DD) method, where the individual window channel method is also adopted for comparison. Uncertainties from SNO thresholds, instrument spectral specification, and radiative transfer simulation are estimated. The SNO thresholds, including time, distance, viewing angle, and scene uniformity of 300 s, 3 km, 0.01, and 0.01, are determined to get collocations for UVIS instruments. Several factors, including instrument line shape (ILS), instrument spectral accuracy, reference solar spectrum, surface albedo, and atmospheric polarization, can influence the radiometric difference obtained by the DD method. Accurate SAO2010 solar spectrum and wavelength accuracy can substantially reduce the dependence of radiometric difference on wavelength. Errors introduced by scalar approximation and parameterized ILS can be neglected. The surface albedo greatly affects the simulated radiance at wavelengths longward of 330 nm. The results show that radiometric differences obtained by using the DD method are consistent with those derived from the individual window channel method, with a discrepancy of 0.4%. An ocean–land calibration difference of 1.5% is found between EMI and TROPOMI at the UVIS band. Inter-calibration using the DD method can minimize t- e spectral variations in full spectral radiance inter-comparison for grating hyperspectral instruments, and the radiometric difference can be estimated comprehensively. The wavelength dependence can also be easily derived from the results of the DD method. The DD method is recommended for radiometric comparison for UVIS hyperspectral spectrometers.

Mapping distortion of detectors in UVIT onboard AstroSat observatory

An Automated Pipeline for Ultra-Violet Imaging Telescope (UVIT)

Infrared Earth Sensor with a Large Field of View for Low-Earth-orbiting Micro-Satellites

An Efficient Algorithm for Infrared Earth Sensor with a Large Field of View.

A sky survey of ultraviolet sources observed through AstroSat's UVIT: A point source catalog

A sky survey of ultraviolet sources observed through AstroSat's UVIT: A point source catalogue

Calibration of AstroSat/UVIT Gratings and Spectral Responses

Geometric distortion and astrometric calibration of the JWST MIRI Medium Resolution Spectrometer

Imaging calibration of AstroSat Cadmium Zinc Telluride Imager (CZTI)

Performance of the UVIT Level-2 Pipeline

Detection of Faint Sources by the UltraViolet Imaging Telescope Onboard AstroSat Using Poisson Distribution of Background

UVIT data reduction pipeline: A CCDLAB and UVIT tutorial

An Investigation on Inter-Calibrating EMI/GF-5 With TROPOMI/S5p in Ultraviolet–Visible Spectra

Micro-arcsecond Astrometry Technology: Detector and Field Distortion Calibration

Calibration of VELC detectors on-board Aditya-L1 mission

Towards Accurate Radiometric Calibration of INSAT-3D and INSAT-3DR IMAGER: Addressing Uncertainty and Error Sources

A Comprehensive Catalog of UVIT Observations I: Catalog Description and First Release of Source Catalog (UVIT DR1)

Two-dimensional homography-based correction of positional errors in widefield MRT images

JUDE: An Ultraviolet Imaging Telescope pipeline

In-orbit Geometric Calibration for Long-linear-array and Wide-swath Whisk-broom TIS of SDGSAT-1