Abstract:The ZY1-02E satellite carrying a thermal infrared sensor was successfully launched from the Taiyuan Satellite Launch Center on 26 December 2021. The quantitative characteristics of this thermal infrared camera, for use in supporting applications, were acquired as part of an absolute radiometric calibration campaign performed at the Ulansuhai Nur and Baotou calibration site (Inner Mongolia, July 2022). In this paper, we propose a novel on-orbit absolute radiometric calibration technique, based on multiple ground observations, that considers the radiometric characteristics of the ZY1-02E thermal infrared sensor. A variety of natural surface objects were selected as references, including bodies of water, bare soil, a desert in Kubuqi, and sand and vegetation at the Baotou calibration site. During satellite overpass, the 102F Fourier transform thermal infrared spectrometer and the SI-111 infrared temperature sensor were used to measure temperature and ground-leaving radiance for these surface profiles. Atmospheric water vapor, aerosol optical depth, and ozone concentration were simultaneously obtained from the CIMEL CE318 Sun photometer and the MICROTOP II ozonometer. Atmospheric profile information was acquired from radiosonde instruments carried by sounding balloons. Synchronous measurements of atmospheric parameters and ECMWF ERA5 reanalysis data were then combined and input to an atmospheric radiative transfer model (MODTRAN6.0) used to calculate apparent radiance. Calibration coefficients were determined from the measured apparent radiance and satellite-observed digital number (DN), for use in calculating the on-orbit observed radiance of typical surface objects. These values were then compared with the apparent radiance of each object, using radiative transfer calculations to evaluate the accuracy of on-orbit absolute radiometric calibration. The results show that the accuracy of this absolute radiometric calibration is better than 0.6 K. This approach allows the thermal infrared channel to be unrestricted by the limitations of spectrum matching between a satellite and field measurements, with strong applicability to various types of calibration sites.

Imaging calibration of AstroSat Cadmium Zinc Telluride Imager (CZTI)

In-orbit performance of AstroSat CZTI

Cadmium Zinc Telluride Imager onboard AstroSat : a multi-faceted hard X-ray instrument

The Cadmium Zinc Telluride Imager on AstroSat

Experimental verification of off-axis polarimetry with Cadmium Zinc Telluride detectors of AstroSat-CZT Imager

Assembly and Calibration System for APS of Star Sensor

Attitude Estimation and Coarse Sun Sensor Calibration for Pico-satellites

AstroSat-CZTI as a hard X-ray Pulsar Monitor

Using collimated CZTI as all sky X-ray detector based on Earth Occultation Technique

The Search for Fast Transients with CZTI

A generalized event selection algorithm for AstroSat CZT Imager data

Mapping distortion of detectors in UVIT onboard AstroSat observatory

Pre-flight evaluation of the soft X-ray telescope optics aboard AstroSat

On-orbit calibration of domestic APS star tracker

On-Orbit Vicarious Radiometric Calibration and Validation of ZY1-02E Thermal Infrared Sensor

Sub-MeV spectroscopy with AstroSat-CZT Imager for Gamma Ray Bursts

Imaging effects due to pixel distortions in CdZnTe (CZT) detectors -- results from the HREXI Calibration Facility (HCF)

Calibrating photometric redshift measurements with the Multi-channel Imager (MCI) of the China Space Station Telescope (CSST)

Innovations in the AOCS of AstroSat spacecraft

Towards Accurate Radiometric Calibration of INSAT-3D and INSAT-3DR IMAGER: Addressing Uncertainty and Error Sources

On-Orbit Geometric Calibration and Accuracy Validation of the Jilin1-KF01B Wide-Field Camera