Abstract:Combined CO2 and SO2 absorption performance in a new combined capture process was evaluated in this work by experimental study using a lab-scale packed column system and a developed rate-based model in Aspen Plus. The combined absorption experiments were carried out to identify the impact of several key operating parameters, including flue gas SO2 and CO2 concentrations, CO2 and SO2 loadings, the absorption temperature, and the L/G ratio, on CO2 absorption and NH3 volatilization. Experimental results indicated that 85% CO2 absorption efficiency was achieved in 5 wt% aqueous NH3 solvent containing lean CO2 loading at 0.2 mol CO2/mol NH3 (C/N) and SO2 loading at 0.1 mol SOilmol NH3 (S/N). The rate-based model was developed using the electrolyte-NRTL method and the RateFrac module in Aspen Plus, and validated as compared to the present experimental results. The modeling results showed that the SO2 loading provided the similar effect on the CO2 mass transfer, the absorption efficiency and the heat of CO2 absorption as compared to the CO2 loading, however, the SO2 loading resulted in lower NH3 volatilization compared to CO2 loading. The lean CO2 loading and the solvent flow rate dynamic adjustment approaches in association with the lean NH3 solvent splitting process were studied to analyze the potential coordination of the combined absorption process and the sulfite treatment system. Maintaining 85% CO2 capture efficiency was possible when SO2 loading was increased from 0.1 to 0.2 S/N by reducing the lean CO2 loading from 0.2 to 0.088 C/N or increasing the solvent flow rate from 8 to 14.1 L/h. The time window for the SO2 treatment by the precipitation process was increased with the increasing split ratio of the lean NH3 solvent splitting process that was associated with the dynamic adjustment approaches. In the present study, the discussion of the combined absorption experiments using the CO2 and SO2 loaded NH3 solvent, the developed rate-based model, and the operation strategies provided valuable contributions to the advancement of the combined CO2 and SO2 capture process.

Absorption of Sulphur Dioxide with Sodium Citrate Buffer Solution in a Rotating Packed Bed

Absorption of Sulphur Dioxide with Sodium Citrate Buffer Solution in a Rotating Packed Bed

Modeling selective absorption of H 2 S from a gas mixture containing CO 2 within rotating packed bed based on surface renewal theory

MODEL OF SIMULTANEOUS ABSORPTION OF SULFUR DIOXIDE AND OXYGEN IN AQUEOUS SOLUTION CONTAINING Mn2+ IN ROTATING PACKED BED

Decomposition Treatment of So2f2 Using Packed Bed Dbd Plasma Followed by Chemical Absorption

Influence of COD/sulfate ratios on the integrated reactor system for simultaneous removal of carbon, sulfur and nitrogen.

Effect of Powder Activated Carbon Circulation Rate on SO2 Adsorption

Absorption and Recovery of SO2 in Flue Gas by Wet Absorption Combined with Bipolar Membrane Electrodialysis

Influence of Operating Parameters on Performance of SO2 Absorption in Fulvic Acid Solution

CHARACTERISTICS OF SULFURDIOXIDE ABSORPFION IN MULTI-COMPONENT SUSPENSIONS

Low concentration SO2 oxidation over partially wetted activated carbon

Performance and kinetics of rotating drum biofilter aerobic simultaneous purifying SO2 and NOx

Study on Competitive Absorption of SO3 and SO2 by Calcium Hydroxide

Absorption of NO2 into Na2S Solution in a Stirred Tank Reactor

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

High-efficient Cyclic Absorption of Sulfur Dioxide in Na-Mg-Ci3- Compound System for Wet Flue Gas Desulfurization

Simultaneous absorption of H 2 S, MM and COS into a novel SRSG absorbent using a rotating packed bed

Process of dual-alkali FGD in a Rotating-stream-tray scrubber

Simultaneous wet absorption of SO2 and NOX with mixed Na2SO3 and (NH4)2SO3: Effects of mass concentration ratio and pH

Experimental study on the influence of SO2 on the CO2 capture process

Investigation on breakthrough curve of SO2 in a packed bed of activated carbon