Abstract:With the development of integrated circuit towards the characteristics of the low-power consumption, miniaturization and high integration, three-dimensional integration technology based on Through-Silicon Via (TSV) comes into being. However, the thermal accumulation caused by the maximum stack density and the thermal stress caused by the mismatched thermal expansion coefficient between TSV surrounding materials will lead to the reliability problems such as circuit function failure and device performance drift. In this paper, the heat dissipation performance and thermal-mechanical reliability of TSV array in 2.5D silicon interposer were studied when the operation temperature is increased from 20°C to 100°C. Firstly, the influences of the geometrical parameters, such as the through hole radius, depth to width ratio, insulation thickness and TSV spacing, on thermal-mechanical reliability were analyzed for single TSV, paired TSV and 3*3 TSV array structures. Secondly, a configuration of TSV regular hexagonal array in silicon interposer is proposed to improve its heat dissipation performance.Our simulation results disclose that the stress is mainly concentrated at the junction where SiO2 layer deviates to copper and silicon substrate deviates to SiO2, which indicates the SiO2 layer is most prone to fracture. The through hole radius should be designed as small as possible to reduce the thermal stress, and a thicker SiO2 insulation layer thickness will induce the better thermal-mechanical stability of TSV. The optimized TSV's depth to width ratio should be set above 5 with the simultaneous consideration of the stress for silicon substrate, insulating layer, filled copper. For multiple TSVs, the spacing should be greater than twice the diameter to eliminate the influence of thermal stress between TSVs. In addition, in the case of the same spacing, the equivalent unit temperature of TSV regular hexagonal array distribution is 2.9°C lower than that of conventional matrix array distribution. The analysis and design of TSV array in 2.5D silicon interposer is promising to offer guideline to the future advanced package development.

A comprehensive numerical analysis for preventing cracks in 2.5D glass interposer

Failure Mechanisms Investigation of Through Glass Via (TGV) under Thermal Annealing and Shock

Study of the thermo-mechanical behavior of glass interposer for flip chip packaging applications

Modeling and Characterization of Annealing Effect on the Cu Protrusion and Thermo-mechanically Behaviors of Through Glass Via

Modeling and Characterization of Annealing Effect on the Cu Protrusion and Thermomechanically Behaviors of Through Glass Via

Development of high performance 2.5D packaging using glass interposer with through glass vias

Finite Element Simulation Study of Interfacial Crack Propagation in the Underfilled FC-BGA Package

Thermal Performance of 2.5D Packaging with the Through Glass Via (TGV) Interposer

Thermo-Mechanical Reliability Study of Through Glass Vias in 3D Interconnection

Structural integrity optimization of 3D TSV package by analyzing crack behavior at TSV and BEOL

Laser cutting sandwich structure glass–silicon–glass wafer with laser induced thermal–crack propagation

Study of Glass Metallization and Adhesion Evaluation for TGV Application

Investigation of Dynamic Multi-Cracking Behavior in PVB Laminated Glass Plates

Investigation on the crack fracture mode and edge quality in laser dicing of glass-anisotropic silicon double-layer wafer

Thermal-Mechanical Analysis of TSV Array in 2.5D Silicon Interposer

Different Driving Mechanisms of In-Plane Cracking on Two Brittle Layers of Laminated Glass

Characterization of a Semiconductor Packaging System utilizing Through Glass Via (TGV) Technology

Interfacial Crack Initiation and Delamination Propagation in Cu-filled TSV Structure by Incorporating Cohesive Zone Model and Finite Element Method

Layout Dependence Stress Investigation in through Glass via Interposer Architecture Using a Submodeling Simulation Technique and a Factorial Design Approach

Investigation on Dynamic Propagation Characteristics of In-Plane Cracks in PVB Laminated Glass Plates

Influence of Scratch on the Crack Pattern of Monolithic Glass under Flexural Loading