Abstract:Having summarized the calculation methods of electric field and the actualities of the research on the calculation of electric field and design of grading rings at home and aboard, this paper combines the finite element method and charge simulation method nicely in order to calculate the electric field and potential distribution along composite insulators as well as design the grading rings for the 800kV UHVDC transmission lines according to the features of composite insulator and the domain decomposition method.The three-dimensional (3D) model of 800kV two polar DC transmission lines with tower configuration and the simplified two-dimensional (2D) model are established by using ANSYS 8.0 and ANSOFT software. The electric field and potential distribution along composite insulator without any grading ring is calculated, which is rather too uneven in the case of running under 800kV UHVDC transmission lines. The potential distribution along composite insulator of 800kV UHVDC transmission line and lower voltage class is contrasted for the further study on the relationship between the nonlinearity of the electric field and potential distribution along composite insulator and the length of the composite insulator. The result shows that the higher the voltage class is, the more uneven the electric field and potential distribution along composite insulator will be.A method to optimize the location and the configuration parameters of the grading ring is presented; the aim of the optimization is the limitation of the maximal electric field around the metal fitting and the grading ring, while the variables are the configuration parameters of the grading ring. If the result of the 3D model is lower than the set electric field intensity, the approving parameters of the grading ring is gained. Finally, the optimized parameters of the grading ring are verified in the 3D model, the result indicates that the maximal electric field around the sheath, metal fitting and the grading ring is controlled to be acceptable, and the optimized grading ring can meet the needs of the ±800kV UHVDC power transmission project.

Effect of Slope Terrain on the Ground Level Total Electric Field of HVDC Transmission Lines

Calculation of Electric Field Distribution along Composite Insulator Strings and Design of Grading Ring of UHVDC Transmission Line

Analysis on Electromagnetic Environment Characteristics of High-Voltage AC Transmission Lines Passing Through Complex Terrains

Electromagnetic Environmental Effect of ±800 Kv UHVDC Transmission Lines

Study on the Power Frequency Electromagnetic Field under UHV Transmission Lines

Simulation and analysis of induced voltage and induced current on overhead ground wire of Jindongnan-Nanyang-Jingmen 1000kV UHV AC transmission line

Simulation and Analysis of Induced Voltage and Current on Overhead Ground Wire of Huainan～Wannan～Zhebei～Huxi 1000kv UHV AC Double-Circuit Transmission Line

Research on Potential Distributions of Soil Surface Caused by Ground Electrode of HVDC System in Heterogeneous Soil Structure

A Coupled FEM-BEM Methodology to Calculate 3D Earth Surface Potentials Caused by HVDC Return Currents

Estimating the Environmental Impacts of HVDC and UHVDC Lines for Large-Scale Wind Power Transmission Considering Height-Dependent Wind and Atmospheric Stability

Analysis of the Influence of Complex Terrain around DC Transmission Grounding Electrodes on Step Voltage

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Calculation and Analysis on Induced Voltage and Current of 1 000 Kv Transmission Line Adopting Structure of Double Circuit on the Same Tower

Electric Field Calculation of HVAC and HVDC Transmission Lines on the Same TowerWith Domain Decomposition Method and High Order Element

Applicable occasions of UHVAC/UHVDC transmission and their technology comparisons in China

Impact of zero-sequence mutual inductance in UHV Anhui-to-east power transfer lines on phase-earth distance protection

Influence Factor Analysis of the Field Distribution Around the Ultra-HVDC Line

Analysis of coupling characteristics of hybrid electric field in the 750kV HVAC and ± 800kV HVDC parallel transmission lines

Improved Electrogeometric Model of UHV Transmission Line Based on Long Gap Discharge and Its Application

Simplified Approach of Maximum Electric Field Distribution on the Ground Near HVAC–HVDC Shared Tower Transmission Lines

Numerical Analysis of Potential Distribution Between Ground Electrodes of Hvdc System Considering the Effect of Deep Earth Layers