Abstract:Vertical-external-cavity surface-emitting semiconductor lasers (VECSELs) are of increasing interest for applications requiring ultra-coherence and/or low noise at novel wavelengths; performance that is currently achieved via high-Q, air-spaced resonators to achieve long intra-cavity photon lifetimes (for the so-called class-A low noise regime), power scaling and high beam quality. Here, we report on the development of a compact, electronically tunable, monolithic-cavity, class-A VECSEL (monolithic VECSEL) for ultra-narrow free-running linewidths. A multi-quantum-well, resonant periodic gain structure with integrated distributed Bragg reflector (DBR) was optically-bonded to an air-gap-free laser resonator created inside a right-angle fused-silica prism to suppress the influence of environmental noise on the external laser oscillation, thus achieving high stability. Mode-hop-free wavelength tuning is performed via the stabilized temperature; or electronically, and with low latency, via a shear piezo-electric transducer mounted on the top of the prism. The free-running linewidth, estimated via the frequency power spectral density (PSD), is sub-kHz over ms timescales and <1.9 kHz for time sampling as long as 1s, demonstrating at least two orders-of-magnitude improvement in noise performance compared to previously reported single frequency VECSELs. The stable, total internal reflection resonator concept is akin to the prevalent monolithic non-planar ring oscillator (NPRO), however the monolithic VECSEL has several important advantages: tailored emission wavelength (via semiconductor bandgap engineering), no relaxation oscillations, no applied magnetic field, and low requirements on the pump beam quality. This approach is power-scalable in principle and could be applied to VECSELs at any of the wavelengths from the visible to the mid-infrared at which they are already available, to create a range of robust, ultra-coherent laser systems with reduced bulkiness and complexity. This is of particular interest for remote metrology and the translation of quantum technologies, such as optical clocks, from research laboratories into real world applications.

Impact of Photon Lifetime on the Temperature Stability of 50 Gb/s 980 nm VCSELs

Impact of Photon Lifetime on High-Speed VCSEL Performance

Lattice Temperature Model and Temperature Effects in Oxide-Confined VCSEL’s

Numerical Investigation of Self-Heating Effects of Oxide-Confined Vertical-Cavity Surface-Emitting Lasers

Performance of a 60-GHz DCM-OFDM and BPSK-Impulse Ultra-Wideband System with Radio-Over-Fiber and Wireless Transmission Employing a Directly-Modulated VCSEL.

Temperature-Insensitive 850-Nm dual-Mode-VCSEL With 25.1-GHz Bandwidth At 85 $^{\circ }$C

30-GHz Bandwidth With Directly Current-Modulated 980-nm Oxide-Aperture VCSELs

Temperature Dependence of 980-Nm Oxide-Confined VCSEL Dynamics

High speed 850nm oxide VCSEL development for 100Gb/s ethernet at Broadcom

Design and analysis of high-temperature operating 795?nm VCSELs for chip-scale atomic clocks

Design, Modeling, and Fabrication of High-Speed VCSEL with Data Rate up to 50 Gb/s

Single-channel 106.25 Gb/s PAM-4 and 64 Gb/s NRZ transmission with a 33.4-GHz 850-nm VCSEL with low-RIN characteristics

Environmentally-stable 50-Fs Pulse Generation Directly from an Er:fiber Oscillator

Position-controlled Telecom Single Photon Emitters Operating at Elevated Temperatures

1550 nm Range High-Speed Single-Mode Vertical-Cavity Surface-Emitting Lasers

Monolithic VECSEL for stable kHz linewidth

Transverse Coupled Cavity VCSEL: Making 100 GHz Bandwidth Achievable

26.5625 Gbaud PAM-4 short-reach transmission at 75°C using 850 nm VCSELs with strategic oxide guiding layer positioning

High-speed 850 nm Vertical-cavity Surface-emitting Lasers with Multilayer Oxide Aperture

Hexagonal Transverse Coupled Cavity VCSEL Redefining the High-Speed Lasers

Temperature Dependence of 980 Nm VCSEL Dynamics