Abstract:The high corrosion rate of Mg alloy restricts its application. In this paper, a nano-composite film as TiN/TiO2 was introduced to Mg alloy to improve the corrosion resistance. The nano-composited film was fabricated by atomic layer deposition (ALD) and in-situ oxidation (20 SCCM oxygen flow, at 250 °C, duration ≥ 20 min). When oxygen is introduced, the initial ALD-ed crystalline TiN layer is rapidly oxidized till the amorphous TiO2 layer is saturated. A stable TiN/TiO2 nano-composited film would be obtained then. X-ray photoelectron spectroscopy depth (XPS-depth) and transmission electron microscopy image (TEM) show that the nano-composite film has an interlayer structure. The nano-composite film shows good adhesion to the Mg alloy substrate in the nano-indentation analysis. Moreover, the nano-indentation scratches heal to a certain degree after 48 h, which means the film could self-heal. With the film, the surface potential mapping is not only overall higher but also less fluctuating by scanning Kelvin probe (SKP) analysis. There is a higher Ecorr (increasing ~0.42 V) and a much lower icorr (decreasing ~1/200) for potentiodynamic polarization (PDP) measurement. Equivalent circuit fitting for electrochemical impedance spectroscopy (EIS) profile changes from Rs(CPE1Rct) to Rs(CPE2(Rf(CPE1Rct))). The film makes less corroded withing a more uniformed corroded mode during neutral salt spray test (NSS). All these indicate that Mg alloy corrosion resistance is greatly improved. The work not only provides a flexible method for the interlayer composite film fabrication but also make an effective surface modification for Mg alloy corrosion resistance.

Enhanced protective nanoparticle-modified MgAl-LDHs coatings on titanium alloy

Fabrication and characterization of an actively protective Mg-Al LDHs/Al2O3 composite coating on magnesium alloy AZ31

Enhanced Protective Coatings on Ti-10V-2Fe-3Al Alloy Through Anodizing and Post-Sealing with Layered Double Hydroxides

Enhancing the wear resistance of titanium alloys through the synthesis of layered double hydroxides combined with titanium nitride coatings

In Situ Growth of High-Performance ZnAl-Layered Double Hydroxides/Al2O3 Composite Coatings on Aluminum Alloy

Ti3C2Tx-based composite coating on AZ31B Mg alloy surface for improved anti-corrosion/wear-reducing properties

Characterization and Corrosion Properties of Ti‐O/HA Composite Coatings on Mg‐Zn Alloy

Influence of MgAl layered double hydroxide nanosheets on the structure and properties of NiFeP composite coatings

Exploring the mechanisms and characteristics of enhanced anti-corrosion and abrasion resistance of Ni–W coatings reinforced with Mg–Al LDH

Superior tribological and anti-corrosion performance of corrosion inhibitors intercalated LDH-MAO coating on AZ31 Mg alloys

Tribological and Corrosion Behaviors of Zr-doped Graphite-Like Carbon Nanostructured Coatings on Ti6Al4V Alloy

Enhancing Corrosion and Wear Resistance of a 7075 Aluminum Alloy Via Depositing TC4 Coating

Enhancement of Corrosion Resistance and Tribological Properties of LA43M Mg Alloy by Cold-Sprayed Aluminum Coatings Reinforced with Alumina and Carbon Nanotubes

Improved corrosion resistance of AZ31 Mg alloy coated with MXenes/MgAl-LDHs composite layer modified with yttrium

Study on growth behavior and properties of LDH nanosheet arrays enhanced Ni-based coatings on Mg-Li alloy

Optimized wear behaviors and related wear mechanisms of medium entropy alloy-based composite coatings

Enhanced Resistance of Ti6Al4V Alloy to High-Temperature Oxidation and Corrosion by Forming Alumina Composite Coating

Microstructure and corrosion resistance of TiN/TiO2 nano-composite film on AZ31 magnesium alloy

Wear and Corrosion Resistance of TiAlSi-Nix (x=0, 5, 11, 17, 23 At%) Multi-Principal Component Alloy Coating Prepared by O0 Oscillating Laser Cladding

Electrophoretic Deposition of MXene Coating on Mg Alloy 2,5 PDCA-LDH Film for Enhanced Anticorrosion/Wear

Multi-functional superhydrophobic coatings on mg Li alloys via SiO 2 nano particles assembled surface modification