Abstract:A reliable, high-performance coating procedure was developed using PDMS to modify a duplex MAO/DLC coating on an AZ31B Mg alloy. First, the duplex MAO/DLC coating was fabricated via a combined MAO and unbalanced magnetron sputter process. Subsequently, a PDMS solution was used to modify the MAO/DLC coating via a conventional dip-coating method. The surface characteristics, bond strength, hardness, tribological behaviour, and corrosion resistance of the coated samples were evaluated via SEM, CA, Raman spectroscopy, friction and wear behaviour, polarisation curve, and NSS tests. The PDMS modification reduced the <em>H</em><sub>IT</sub> of MAO/DLC coating from 15.96 to 8.34 GPa; this is ascribed to the penetration of PDMS, which has good rheological properties to form a viscoelastic Si-based organic polymer layer on the MAO/DLC coating. However, the PDMS-modified MAO/DLC coating was denser, hydrophobic, and had higher bond strength compared with MAO- and MAO/DLC-coated samples. Moreover, the PDMS modification reduced the COF and wear rate of the duplex MAO/DLC coating. This indicates that the PDMS improved the tribological behaviour owing to the transferred Si oxide that originated from the Si-O network of the PDMS, as well as the low graphitisation of the DLC layer during sliding. Furthermore, the corrosion current density of the MAO/DLC-coated sample modified by PDMS for 10 min decreased by two order of magnitude compared with that of the MAO/DLC-coated sample but by five orders of magnitude compared with that of the bare substrate. The NSS tests proved that the PDMS layer slowed the corrosion of the Mg alloy under long-term service, enhancing the corrosion protection efficiency. The results are attributed to the high bond strength and lubricant MAO/DLC layer, and the dual role of sealing and hydrophobicity of PDMS. Therefore, PDMS modification is promising for the fabrication of protective materials for Mg alloys that require corrosion and wear resistance.

Superior tribological and anti-corrosion performance of corrosion inhibitors intercalated LDH-MAO coating on AZ31 Mg alloys

Enhanced corrosion protection for MAO coating on magnesium alloy by the synergism of LDH doping with deposition of 8HQ inhibitor film

Study on Corrosion Resistance of LDH/Micro-Arc Oxidation Composite Superhydrophobic Coatings on AZ31 Magnesium Alloy

Corrosion and tribocorrosion resistance of MAO-based composite coating on AZ31 magnesium alloy

Improvement of Corrosion and Wear Resistance of Mg-Li Alloy by Binary- and Ternary-Layered Double Hydroxide/Steam Coating Composite Coatings

Comparative Study on Microstructure, Corrosion Morphology and Friction Wear Properties of LDH/SC Composite Coatings on Mg‐Li alloy

Corrosion resistance study of ZIF-67/Co-Fe LDHs composite coating on the surface of AZ31 magnesium alloy micro-arc oxidation film

Multi-functional superhydrophobic coatings on mg Li alloys via SiO 2 nano particles assembled surface modification

A Novel Mg-Al-Co LDH/ MAO Composite Films on LA103Z Magnesium-Lithium Alloy and Its Active Anti-corrosion Performance

Properties of polydimethylsiloxane hydrophobic modified duplex microarc oxidation/diamond-like carbon coatings on AZ31B Mg alloy

Design and in situ prepare a novel composite coating on Mg alloy for active anti-corrosion protection

Enhanced corrosion protection of AZ31B magnesium alloy by MgAl-LDHs composite coatings double-doped with imidazolium ionic liquid and sodium dodecylbenzenesulphonate

Superhydrophobic Surface on MAO-processed AZ31B Alloy with Zinc Phosphate Nanoflower Arrays for Excellent Corrosion Resistance in Salt and Acidic Environments

Effective corrosion and wear protection of slippery liquid-infused porous surface on AZ31 Mg alloy

Improved Lubricating and Corrosion Resistance of MAO Coatings on ZK61 Mg Alloy by Co-Doping with Graphite and Nano-Zirconia

Enhanced Corrosion Resistance of a Double Ceramic Composite Coating Deposited by a Novel Method on Magnesium-Lithium Alloy (LA43M) Substrates

Preparation and properties of hydrophobic micro-arc oxidation/layered double hydroxide composite coating on magnesium alloy

Improved corrosion resistance of AZ31 Mg alloy coated with MXenes/MgAl-LDHs composite layer modified with yttrium

In Situ Preparation of Mg-Al-Co Layered Double Hydroxides on Microarc Oxidation Ceramic Coating of LA103Z Magnesium-Lithium Alloy for Enhanced Corrosion Resistance

Enhanced corrosion protection of magnesium alloy via in situ Mg–Al LDH coating modified by core–shell structured Zn–Al LDH@ZIF-8

Superhydrophobic and smart MgAl-LDH anti-corrosion coating on AZ31 Mg surface