Abstract:This work presents the structural and electrical characterization of K2NiF4-type layered perovskites of LaSrAl1-xMgxO4-δ composition to be used as oxide-ion electrolytes for a solid-oxide fuel cell (SOFC). These perovskites were prepared by mechano-chemical synthesis (ball milling), an alternative to traditional synthesis methods such as citrate-nitrates and solid-state reaction. With these methods, two things are avoided: first, the use of nitrate salts, which are more environmentally harmful than oxide precursors, and second, it saves the series of long thermal treatments associated with solid-state reactions. After grinding the precursors, nanometric particles were obtained with a combination of crystalline regions and amorphous regions; this effect was determined by XRD and TEM, showing that Mg has a positive effect on the phase formation by only mechanical synthesis. R2C4: After sintering, it was found by XRD that the sample x = 0.1 only presents the diffraction peaks corresponding to the desired phase, which shows a phase purity greater than 97%, even higher than that of the standard undoped sample. For x = 0.2 and 0.3, there was a segregation of impurities, possibly by the local migration of La and Sr heavy cations; this was determined by SEM and EDS. The electrical characterization of the sintered pellets was carried out by electrochemical impedance spectroscopy, which determined that the incorporation of Mg in the structure improves the ionic conductivity by three orders of magnitude, obtaining conductivities of 1.6 mS/cm at 900 °C for x = 0.2. Although the improvement in conductivity is considerable, many challenges such as densification, the segregation of impurities, and the study of mechanical and thermal properties must be carried out on these materials to endorse them as solid electrolytes in SOFC.

Synthesis, Structural, Electrical and Microchemistry Properties of Novel (LSCFM) LaxSr1-xCo1-y-zFeyMnzO3-δ (x=0.4, 0.6, 0.8, y=0.4, 0.8 and z=0.1, 0.2) Perovskites for SOFC Applications

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Characterization And Stability Of La0.7sr0.3co0.3fe0.7o3 Perovskite-Type Oxide

Synthesis And Electrical Properties Of La0.6m0.4feo3-Delta (M=Ca, Sr, Ba) As Cathodes For Sofcs

Structural and Electrical Characterization of LaSrAl1-xMgxO4-δ Layered Perovskites Obtained by Mechanical Synthesis

B-site Mo-doped Perovskite Pr0.4Sr0.6 (co0.2fe0.8)1−mo O3− (x = 0, 0.05, 0.1 and 0.2) As Electrode for Symmetrical Solid Oxide Fuel Cell

Evaluation of simple, easily sintered La0.7Ca0.3Cr0.97 O3-δ perovskite oxide as novel interconnect material for solid oxide fuel cells

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Synthesis And Characterization Of La0.75sr0.25mn0.5cr0.5-Xcuxo3-Delta For Sofc Anode Material

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Fabrication and performance analysis of A-site metal-promoted La0.595V0.005Sr0.4CoO3−∂ perovskite oxides as cathodes for intermediate temperature solid oxide fuel cells

Evaluation of Strontium-Site-deficient Sr2Fe1.4Co0.1Mo0.5O6−δ-based Perovskite Oxides As Intermediate Temperature Solid Oxide Fuel Cell Cathodes

Alkaline Metal Doped Strontium Cobalt Ferrite Perovskites As Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Synthesis and characterization of La0.75Sr0.25Mn0.5Cr0.5-x CuxO3-δ for SOFC anode material

Stable, Easily Sintered Ca–Zn-doped YCrO3 As Novel Interconnect Materials for Co-Fired Yttrium-Stabilized Zirconia-Based Solid Oxide Fuel Cells

Optimization on Fabrication and Performance of A-site-deficient La 0.58 Sr 0.4 Co 0.2 Fe 0.8 O 3-Δ Cathode for SOFC

Novel cobalt‐free family of SrFe 1‐x Sc x O 3 ‐δ perovskite materials for cathode applications in solid oxide fuel cells

Synthesis and characterization of layered perovskite cathode materials for SOFC application

Synthesis and Characterization of La_(0.75)Sr_(0.25)Mn_(0.5)Cr_(0.5-x)Cu_xO_(3-δ) for SOFC Anode Material

A-Site Engineering of the High-Entropy Perovskite Pr0.4La0.4Ba0.4Sr0.4Ca0.4Fe2O5+δ Cathode for Intermediate-Temperature SOFCs

Synthesis and characterization of La 0.6Sr 0.4-xCa xCo 0.2Fe 0.8O 3 materials by the gel-casting process