Abstract:Alloying of transition metal diborides with other metals seems to be a suitable way to maintain their excellent mechanical properties under high-temperature loads. Here, we focus on the perspective tantalum diboride (TaB 2 ) hard film, where we investigate the effect of aluminum alloying on the thermally induced structural evolution and mechanical properties of α-Ta 1−x Al x B 2 using a combination of density functional theory and experiments. Ab initio calculations predict a strong tendency toward the spinodal phase decomposition of the α-TaAlB 2 solid solution into isostructural binaries in the entire concentration range at T = 0 K. However, an increase in temperature (T > 773 K) leads to stabilization of the α-Ta 1−x Al x B 2 solid solution at x < 0.5. The experimental results of magnetron co-sputtered Ta 0.75 Al 0.25 B 2.14 and Ta 0.69 Al 0.31 B 2.16 films with aluminum concentrations of 8 and 12.5 at. %, respectively, confirm the insolubility of aluminum in the TaB 2 phase. The structure has a nanocomposite character formed by α-TaB 2 nanofilaments surrounded by an Al-rich tissue phase. The films are structurally stable up to 1200 °C, but Al atoms already begin to diffuse from the boundary regions when the temperature exceeds 1000 °C. Al alloying causes a decrease in hardness, since the hardness of the reference as-deposited TaB 1.21 , Ta 0.75 Al 0.25 B 2.14, and Ta 0.69 Al 0.31 B 2.16 films is 34, 28, and 27 GPa, respectively. Exposing the films to high temperatures does not lead to a hardening effect; the hardness of Al-depleted films annealed at a temperature of 1200 °C decreased by approximately 10%. The decrease in Young's modulus from 420 GPa (TaB 1.21 ) to 370 GPa (Ta 0.69 Al 0.31 B 2.16 ) indicates a tendency toward the ductile behavior of Al alloyed films under mechanical load.

Thermal Oxidation of Nanosized Tantalum Diboride

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Influence of Annealing Temperature on Microstructure and Phase Transformations of Oxide System Bi2O3/TiO2 Formed in Aqueous Solutions

Surface Characterization of Thermally Oxidized Titanium Alloys

Composition Dependence of the Kinetics and Mechanisms of Thermal Oxidation of Titanium-Tantalum Alloys

Oxidation behavior and atomic structural transition of size-selected coalescence-resistant tantalum nanoclusters

Oxidation mechanism and kinetics of TiB2 submicron powders in air

New insights into the mechanisms of TiB 2 (001) thermal oxidation combining molecular dynamics and density functional theory calculations

Unmasking the anomalous rapid oxidation of refractory TiB2 at low temperatures

The Effect of Thermal Oxidation on the Photothermal Conversion Property of Tantalum Coatings

An Investigation of Oxides of Tantalum Produced by Pulsed Laser Ablation and Continuous Wave Laser Heating

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

Thermodynamic and microstructural study of Ti2AlNb oxides at 800 °C

Structure evolution and mechanical properties of Al-alloyed tantalum diboride films prepared by magnetron sputtering co-deposition

Annealing effects on the optical and electrochemical properties of tantalum pentoxide films

Oxygen diffusion in freestanding body centered cubic tantalum structural thin films in air and in high vacuum

Thermodynamics of the Interaction of Niobium and Tantalum with Oxygen and Nitrogen at Temperatures near the Melting Point

Tantalum dioxide complexes with dinitrogen. formation and characterization of the side-on and end-on bonded TaO2(NN)x (x = 1-3) complexes.

Oxidation Kinetics of Superconducting Niobium and a-Tantalum in Atmosphere at Short and Intermediate Time Scales

Boron Nitride Nanotubes Versus Carbon Nanotubes: A Thermal Stability and Oxidation Behavior Study

Thermal analysis and crystal growth of doped Nb$_2$O$_5$