Abstract:This work examines the stability of epitaxial 3C-SiC/Si heterojunctions subjected to heat treatments between 1000 °C and 1300 °C. Because of the potential for silicon carbide in high temperature and harsh environment applications, and the economic advantages of growing the 3C-SiC polytype on large diameter silicon wafers, its stability after high temperature processing is an important consideration. Yet recently, this has been thrown into question by claims that the heterojunction suffers catastrophic degradation at temperatures above 1000 °C. Here we present results showing that the heterojunction maintains excellent diode characteristics following heat treatment up to 1100 °C and while some changes were observed between 1100 °C and 1300 °C, diodes maintained their rectifying characteristics, enabling compatibility with a large range of device fabrication. The parameters of as-grown diodes were J0 = 1 × 10−11 A/mm2, n = 1.02, and +/−2V rectification ratio of 9 × 106. Capacitance and thermal current-voltage analysis was used to characterize the excess current leakage mechanism. The change in diode characteristics depends on diode area, with larger areas (1 mm2) having reduced rectification ratio while smaller areas (0.04 mm2) maintained excellent characteristics of J0 = 2 × 10−10 A/mm2, n = 1.28, and +/−2V ratio of 3 × 106. This points to localized defect regions degrading after heat treatment rather than a fundamental issue of the heterojunction.

Amorphous Silicon Diodes as Temperature Sensors in Microwave Thermal Ablation Applications: An Initial Assessment

Characterization of hydrogenated amorphous silicon sensors on polyimide flexible substrate

Thermal Characterization of Quasi-Vertical GaAs Schottky Diodes Integrated on Silicon

Quasi-vertical diamond temperature sensor by using Schottky–pn junction structure diode

Thermoelectric thermal detectors based on ultra-thin heavily doped single-crystal silicon membranes

An in vitro demonstration of a passive, acoustic metamaterial as a temperature sensor with mK resolution for implantable applications

Numerical models to evaluate the temperature increase induced by ex vivo microwave thermal ablation

Thermal Behavior of Amorphous Silicon Thin Film Transistor and Its Application to Micromachined Uncooled Infrared Sensors

Analysis of the Electrical Characteristics of Mo/4H-SiC Schottky Barrier Diodes for Temperature-Sensing Applications

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Piezoresistive temperature sensors fabricated by a surface micromachining CMOS MEMS process

Mobility Gaps of Hydrogenated Amorphous Silicon Related to Hydrogen Concentration and Its Influence on Electrical Performance

Temperature Detection Based on Surface Plasmon Resonance Sensor for Microwave Ablation

10Kv SiC MPS Diodes for High Temperature Applications

Metal silicide/poly-Si Schottky diodes for uncooled microbolometers

Excellent Rectifying Properties of the n-3C-SiC/p-Si Heterojunction Subjected to High Temperature Annealing for Electronics, MEMS, and LED Applications

A Modular High-Temperature Measurement Set-Up for Semiconductor Device Characterization

Dielectrically-Loaded Cylindrical Resonator-Based Wireless Passive High-Temperature Sensor

Accurate Temperature Monitoring Scheme For Microwave Annealing With Silicon Substrate

Photonic and Thermal Modelling of Microrings in Silicon, Diamond and GaN for Temperature Sensing

Noninvasive Measurement of Temperature for Simulated Tissue Based on Piezoelectric Micromachined Ultrasonic Transducers