Abstract:Purpose: Computational models of microwave ablation (MWA) are widely used during the design optimization of novel devices and are under consideration for patient-specific treatment planning. The objective of this study was to assess the sensitivity of computational models of MWA to tissue biophysical properties. Methods: The Morris method was employed to assess the global sensitivity of the coupled electromagnetic-thermal model, which was implemented with the finite element method (FEM). The FEM model incorporated temperature dependencies of tissue physical properties. The variability of the model was studied using six different outputs to characterize the size and shape of the ablation zone, as well as impedance matching of the ablation antenna. Furthermore, the sensitivity results were statistically analyzed and absolute influence of each input parameter was quantified. A framework for systematically incorporating model uncertainties for treatment planning was suggested. Results: A total of 1221 simulations, incorporating 111 randomly sampled starting points, were performed. Tissue dielectric parameters, specifically relative permittivity, effective conductivity, and the threshold temperature at which they transitioned to lower values (i.e., signifying desiccation), were identified as the most influential parameters for the shape of the ablation zone and antenna impedance matching. Of the thermal parameters considered in this study, the nominal blood perfusion rate and the temperature interval across which the tissue changes phase were identified as the most influential. The latent heat of tissue water vaporization and the volumetric heat capacity of the vaporized tissue were recognized as the least influential parameters. Based on the evaluation of absolute changes, the most important parameter (perfusion) had approximately 40.23 times greater influence on ablation area than the least important parameter (volumetric heat capacity of vaporized tissue). Another significant input parameter (permittivity) had 22.26 times higher influence on the deviation of ablation edge shape from a sphere than one of the less important parameters (latent heat of liver tissue vaporization). Conclusions: Dielectric parameters, blood perfusion rate, and the temperature interval across which the tissue changes phase were found to have the most significant impact on MWA model outputs. The latent heat of tissue water vaporization and the volumetric heat capacity of the vaporized tissue were recognized as the least influential parameters. Uncertainties in model outputs identified in this study can be incorporated to provide probabilistic maps of expected ablation outcome for patient-specific treatment planning.

Numerical models to evaluate the temperature increase induced by ex vivo microwave thermal ablation

Theoretical Evaluation of Microwave Ablation Applied on Muscle, Fat and Bone: A Numerical Study

Expanded modeling of temperature-dependent dielectric properties for microwave thermal ablation

Experimental assessment of microwave ablation computational modeling with MR thermometry

2450‐MHz microwave ablation temperature simulation using temperature‐dependence feedback of characteristic parameters

Sensitivity of microwave ablation models to tissue biophysical properties: A first step toward probabilistic modeling and treatment planning

Temperature Distribution Analysis of Tissue Water Vaporization During Microwave Ablation: Experiments and Simulations

Some Thermal Problems in Microwave Ablation Therapy for Hepatocellular Carcinoma

Numerical study of the induction of intratumoral apoptosis under microwave ablation by changing slot length of microwave coaxial antenna

Nearly Spherical Ablation Zone with Minimally Invasive Microwave Ablation: Analysis and Experimental Characterization of a Tapered-Tip Symmetric Dipole Antenna

Numerical Study on Thermal Field of Microwave Ablation with Water-Cooled Antenna

Investigation of the Heat Sink Effect During Microwave Ablation in Hepatic Tissue: Experimental and Numerical Analysis

3D modeling of vector/edge finite element method for multi-ablation technique for large tumor-computational approach

Computer Simulations of Dual-Antenna Microwave Ablation and Comparison to Experimental Measurements

Temperature Simulation of Microwave Ablation Based on Improved Specific Absorption Rate Method Compared to Phantom Measurements.

Study on thermal field of microwave ablation with internall gas-cool antenna

Research on Evaluation Optical Parameters of Bone Thermal Injury During Microwave Ablation

Temperature Simulation of an Ablation Needle for the Prediction of Tissue Necrosis during Liver Ablation

Numerical Study for Lung Microwave Ablation in Different Thermal and Electrical Properties

A Computational Model for Simulation of Temperature During Radio-Frequency Ablation of Biological Tissue

Thermal field study of ceramic slot microwave ablation antenna based on specific absorption rate distribution function